Save Big on Warehouse Cleaning
Go to Daily Deals SectionMeliodent Heat Cure
Meliodent – Cost-Effective Production Of Dentures
A denture base material designed by Heraeus Kulzer to make technicians working environment safer. By containing only organic pigments. Meliodent is free from cadmium. The surfance of the denture has perfect properties that allows excellent oral hygiene.
The large variety of colours satisfies almost all needs. Whether clear, standard pink or exotic colours – almost all regional colour exceptions can be satisfied. Compared to other products, Meliodent Heat Cure plays a special role as a denture material : it is most probably the only material with such a large variety of colours!
Benefits at a glance :
Features | Benefits |
---|---|
Meliodents super-fine polymer gives a superb flow | Trial closures may become unnecessary; displaced teeth and raised bite during flasking can be a thing of the past |
Meliodent has a short dough time 6 minutes at 23°C | Allows the busy technician to save time by packing dentures earlier than with other acrylics |
Meliodent has a long working time up to 30 minutes plus (depends on room temperature) | High versatile working – Can be cured using the boiling technique or by any other curing cycle |
Meliodent is economical priced for use in the dental laboratory | A superior product with a competitive edge |
Meliodent has a unique co-polymer formula | This gives exceptional surface and smoothness characteristics. Less plaque build up and superior tissue compatibility means healthier patients |
Paladent 20
Dental acrylic for fabrication of full and partial dentures
Paladent 20 – its well-balanced properties make it economical to use and guarantee high-quality dentures at a reasonable price.
Paladent 20 has very good mechanical properties. It can be processed easily without additional equipment. It’s plastic consistency allows the dough to be packed very easily. In addition, it has a very long working time of up to 30 min, allowing the production of several dentures simultaneously.
Paladent 20 has a good colour stability and a low residual monomer. These points guarantee that the patient can wear the denture for many years without any problems. The colours such as R50 veined are excellent colour matches to all other Heraeus Kulzer denture materials while R50 veined allows individual choice of colour, invisible repairs and extensions.
Meliodent Rapid Repair
Meliodent – Cost-Effective Production Of Dentures
An additional component is Meliodent Rapid Repair, an acrylic used for repairs, with material and colour properties that suit this top quality denture base material perfectly.
Dentalon Plus
DENTALON® Plus – well-established
Dentalon Plus is a well-established self-curing resin in a powder/liquid combination for the fabrication of temporary crowns and bridges.
Denture Liner





Denture Liner
Economical lining material with less stimulation, and with hardness same as the denture base
This is the hard lining material with less stimulation and hardens gradually, so that it can be taken out safely even in the case of many undercuts for partial dentures. Also by using attached self-curing accelerator, it can be as hard as the base of denture. Therefore there will be little level difference between the base and lining material at the final polish.
Contents | Powder 100 gr, liquid 100 mL, self-curing accelerator 36 gr |
Colors | Pink |
Denture Soft II





Denture Soft II
Best selling product with outstanding durability
In addition to durability, this conditioner is twice as good as a conventional one, the durability has further increased due to attached surface smoothing material
Contents | Powder 100 gr, liquid 80 mL, New top coat 6 mL |
Colors | Pink |
FD Soft





FD Soft
Acrylic soft lining material as soft as tissue conditioner
Durability is six months to a year by using with a denture cleanser Clean Soft for exclusive use.
A denture cleanser exclusively for soft lining material, “Clean Soft” should be used to prevent a lining surface of the denture from being ruined.
Acrylic soft lining material has many merits;
A denture cleanser exclusively for soft lining material, “Clean Soft” should be used to prevent a lining surface of the denture from being
Contents | Powder 110 gr, liquid 100 mL, New top coat 30 mL |
Colors | Pink |
Soft To Hard DIL





Soft To Hard DIL
The world first success in the development.
This functions as tissue conditioner first, then automatically begins self-curing a week after wearing. As it hardens after taking the functional impression, so patients feel comfortable with their denture with less pain. “Polident” with enzyme (denture cleanser) can be used from a week after wearing.
Contents | Powder 50 gr, liquid 45 mL, New top coat 30 mL |
Colors | Pink, Fiber Pink |
Peri-Resin II





Peri-Resin II
Only this resin which can make border molding and sealing of dentures
Because of its thixotropic character, border molding is easy in the early polymerizing stage.
As Peri-Resin is not sticky, so you can shape the border easily with wet fingers.
After extending and correcting the shape of peripheral edge of denture base, mucous surface might be lined using lining material such as DIL.
Contents | Powder 70 gr, liquid 50 mL, New top coat 6 ml, Syringe 2 |
Colors | Pink |
Clean Soft





Clean Soft
Denture cleanser exclusively for soft resin and durability of soft lining material has increased greatly.
This is a denture cleanser exclusively for acrylic soft lining material.
The cleaning strength is ten times stronger than that of commercially available enzymatic ones.
Length | 1,25 metre |
---|---|
Length | 1,25 metre |
Length | 1,25 metre |
Length | 1,25 metre |
Replica





Replica
Replica of denture can be made easily at chair side
This is a special resin exclusively for replica denture, which suppresses a resin contraction, increases a fitting accuracy, and gets smooth surface. Replica denture can be made easily with a flask for exclusively use and alginate impression material.
Poly Seal





Poly Seal
Fit for temporary sealing of cavity which easily comes out
Characteristics :
Contents | Powder 100 gr, Powder 250 gr Liquid 100 mL, Liquid 300 ml |
Colors | Ivory |
Snap





Snap
Total cost down with this quick self-curing resin
Self-curing resin of quick hardening comes in two colors, which are crown and gingival color.
It can be used for repair of denture and temporary crown.
Contents | Powder 100 gr, Powder 250 gr Liquid 80 mL, Liquid 300 ml |
Colors | Pink, Fiber Pink, Ivory |
Denture Gel





Denture Gel
Oral moisturizing paste suitable to patients with dentures
This oral mucosa moisturizing paste has more viscosity than conventional products, so that patients with dentures can use for denture stability. There is a small pouch type for easy carrying.
Type | Contents |
---|---|
Tube | 45 gr |
Small Pouch | 2,5 gr |
Nu Alloy ® Dp Active





Nu Alloy ® Dp Active
Nu Alloy ® dp Active is a unique or simple composition alloy, which guarantees absolute chemical homogeneity of their particles. Thanks to ideal chemical composition (45% Ag, 31% Sn and 24% Cu), eliminating the presence of gamma-2 phase of the microstructure of the amalgam due of the high copper content. This reduces the problems of fragility and instability in corrosive environments.
Nu Alloy ® Dp





Nu Alloy ® Dp
Dispersed-phase : A mixture of lathe-cut irregular particles and atomized spherical particles.
High-copper-content: >12%.
Nu Alloy® dp is a single composition alloy with absolute homogeneity of its particles.
Thanks to its optimal chemical composition (45%Ag, 31%Sn, and 24%Cu) and its high copper content, the gamma-2 phase is eliminated from the alloy microstructure. As a result of this, fragility and instability problems in corrosive environments decrease.
Its morphology is composed of atomized and lathe-cut particles which results in a fast amalgamation with its optimal 50% mercury content (Mercury-to-alloy ratio : 1:1) and improves the alloy’s physical and mechanical properties.
This alloy has a high resistance to marginal fractures, excellent adaptation and marginal sealing, thanks to the homogeneity of its particles.
Fine surface finish originated in the granulometry of its spherical and prismatic particles.
Chrome Plated Syringes





Alphacaine





Alphacaine
Indication :
Advantages :
RXDC Extend Mobile
Precision imaging
RXDC eXTend is MyRay’s latest version of the high-frequency X-ray unit built to offer accurate X-ray imaging thanks to the outstanding parallelism achieved via 12” embedded collimation. Design solutions and cutting-edge technology combine to provide dental professionals with a highly precise piece of equipment which boasts flexibility thanks to multifunctional settings and wireless controls. Specifically conceived for digital X-ray imaging, the constant potential tube head guarantees consistently sharp images and contributes to achieving a significant reduction of the radiation dosage.
Minimal radiation
RXDC, with its constant potential high frequency X-ray generator, significantly reduces radiation dosage compared to traditional X-ray units. Not only is the most harmful, low-energy radiation almost completely eliminated thanks to the highefficiency generator, but the embedded 12” collimation increases the X-ray parallelism, leading to better image quality and higher regard for patient’s health.
MyRay eXTend parallelism
Despite of the appearance, the compact tube-head features a long internal collimation of the X-ray beam, achieving a default 12” source-to-skin distance, which allows for sharper images and better details than those achieved by average radiographs.
Simple wireless control
One handheld wireless digital control device allows you to program the unit from wherever you are in the surgery. There are no other wall-mounted or wired control panels to worry about. Easy-to-use and easy-to-handle, the control device offers a full range of intuitive exposure scenarios designed to make correct X-ray acquisition a straightforward process. No more complex programming or button-crowded panels. RXDC defines automatically the correct exposure by selecting the region of interest.
MyRay Multi-Mode
Totally automatic selection of the appropriate combination of kV and mA settings depending on patient size and tooth region.
Simple wireless control
One handheld wireless digital control device allows you to program the unit from wherever you are in the surgery. There are no other wall-mounted or wired control panels to worry about. Easy-to-use and easy-to-handle, the control device offers a full range of intuitive exposure scenarios designed to make correct X-ray acquisition a straightforward process. No more complex programming or button-crowded panels. RXDC defines automatically the correct exposure by selecting the region of interest.
Multiple exposure control
RXDC allows uninterrupted use during multiple exposures, such as full-mouth acquisition, thanks to the Dynamic Duty-Cycle, based on real-time control over the bulb temperature, visible on the handheld display.
Classification | Electro-medical equipment Class I type B |
Generator | Constant potential, microprocessor controlled |
Operating frequency | 145KHz – 230 KHz self adjusting (175 KHz typical) |
Focal spot | 0.7 mm, square, IEC 336 |
Irradiated field | 35 x 45 mm rectangular, Ø 55mm or Ø 60 mm round |
Total filtration | 2.5 mm Al |
Anode current (mA) | 6, 7 mA |
Voltage (kV) | 60, 63, 65 kVp |
Exposure Time | 0,010 – 1,000 sec, R10 and R20 scale |
Source-skin distance | 30 cm rectangular, 30 and 20 cm round |
Line voltage | 50/60 Hz, 115V ± 10% or 230V ± 15% |
Duty cycle | Self regulating, continuous operation up to 1s/60s |
Weight | 20Kg |
Weight of Tube-head | 5Kg |
Arms | Available in 3 lengths: 40 cm – 60 cm – 90 cm |
Max arm extension | 230 cm, from wall |
Certification | CE 0051 |
Bud, Rounded, Long 79 Steel Instruments


Axiom BL 2.8 Surgical And Prosthetic Kit
Axiom® BL 2.8 dedicated kit
The Axiom® BL 2.8 surgical and prosthesis kit is designed for surgery and prostheses for Axiom® BL 2.8 implants.
The kit offers a simple, easy work flow with orange colour coding specific to the Axiom® BL 2.8 implant
Conical Pointed, Slender 859 Diamond Instruments


Conical Pointed, Slender 859 Diamond Instruments
Breaking Contact
Thin needle- or flame shaped diamonds are ideal to break the interproximal contact during crown preparation
859 | conical pointed, slender | ||||||||
---|---|---|---|---|---|---|---|---|---|
Fig | Shank | ISO | Color | Ø | |||||
Friction Grip | |||||||||
859 | FG | 806 314 166 524 – | 010 | 012 | 014 | 016 | 018 | ||
859SG | FG | 806 314 166 544 – | 018 | ||||||
859G | FG | 806 314 166 534 – | 014 | 016 | 018 | 021 | |||
859F | FG | 806 314 166 514 – | 010 | 012 | 014 | 016 | 018 | ||
859EF | FG | 806 314 166 504 – | 010 | 012 | 014 | 016 | 018 | ||
859UF | FG | 806 314 166 494 – | 014 | ||||||
Right Angle | |||||||||
859 | RA | 806 204 166 524 – | 014 | 018 | |||||
L mm | 10,0 | 10,0 | 10,0 | 10,0 | 10,0 | 10,0 | |||
Content | 5 | 5 | 5 | 5 | 5 | 5 |
GC Fuji I Capsule
GC Fuji I Capsule is designed for the final cementation of crown and bridge restorations. It has been refined to provide enhanced physical properties. GC Fuji I chemically bonds to tooth structure and metal which provides excellent strength and marginal integrity for long term restorations. It's also well suited for securing metal inlays, onlays, posts and orthodontic brackets. Available in hand-mix powder-liquid or convenient, pre-measured capsules.
G-aenial Bond
7th generation one component self etching light cured adhesive
GC FujiCEM
GC FujiCEM is the first resin-reinforced glass ionomer luting cement in a paste formulation. Together with its own unique dispenser, GC FujiCEM paste forms a complete luting system that simplifies the current technique, saves time during procedure and helps ensure perfect result.
Surgical Dressing
Alveolar analgesic and antiseptic dressing.
Surgical Dressing is a paste of creamy consistency to be used for treating post-operative dental pains and to combat alveolar infection. The dressing provides almost instant pain relief. Its action is long-lasting as the paste is completely absorbed by the tissues.
VistaScan Mini Easy
VistaScan Mini Easy considerably simplifies imaging in the surgery :
With the proven engineering and outstanding image quality characteristic of Dürr Dental image plate scanners worldwide. Made in Germany.
The VistaScan Mini Easy image plate scanner
Since the introduction of conventional X-ray film development in dental medicine, Dürr Dental has been leading the way in diagnostics for dental surgeries. Digital X-ray with Dürr Dental offers dentists images with high resolution to meet all diagnostic demands. More than 40 years experience in the development of X-ray technology leads time and again to practice-oriented and innovative solutions. The VistaScan Mini Easy image plate scanner makes image plate diagnostics even faster for dentists. The compact device is particularly easy to
use and requires a minimum of space – so that it can be installed in the treatment room. The advantage: X-ray and scanning directly at the chairside. The reusable VistaScan image plates are read out in top quality within seconds. There has never been a better time to change over to image plates.
Faster and more reliable diagnostics
When changing over from X-ray film to 'digital' image plates, the X-ray exposure procedure remains the same as before. However, the diagnostic reliability is increased thanks to optimum detail recognition and sophisticated software support. With the VistaScan Mini Easy you benefit from all of the advantages of the Dürr Dental image plate technology in its most compact form. The thin, flexible image plates are more comfortable to the patient and are particularly durable thanks to their special coating. The DBSWIN imaging software displays the results in brilliant quality and allows ergonomic working procedures. The VistaScan Mini Easy can be operated with most standard dental imaging software packages.
Plate sizes | 0 (2 x 3 cm) + 2 (3 x 4 cm |
Effective resolution (lp/mm) | 16.6 (850 dpi) |
Weight (kg) | 6.5 |
Dimensions (H x W x D mm) | 226 x 234 x 243 |
Standby function | Yes |
Interfaces | USB |
Xantalgin Crono
Xantalgin® – the fine-paste alginate for sensitive patients.
It shows a high level of accuracy and is particularly suitable for sensitive patients due to its soft starting consistency. The dust free and clean mixing is easy and comfortable
We use high quality seaweed from preferred cultivation areas as a basis for our alginate impression material. These alginates last longer without preservatives. Since they do not contain any chemical disinfectants, they are skin and gingiva friendly. Their mild peppermint taste also makes the impression more pleasant for the patient. Xantalgin is best suited for documentation, analysis, planning, opposing bite and working model.
Flame 9831 Polishers & Brushes


Flame 9831 Polishers & Brushes
JOTA EASY – One-step high-performance diamond polisher for finishing and mirror finishing of all composite
Skimming: 7‘000 – 10‘000 rpm
Polishing: 3‘000 – 8‘000 rpm
Also available in the kit 1393
9831 | flame | ||
---|---|---|---|
Fig | Shank | ISO | Ø |
Right Angle | |||
9831 | RA | 803 204 243 502 – | 030 |
L mm | 6,0 | ||
Content | 2 |
Conical Pointed 890 Diamond Instruments


Conical Pointed 890 Diamond Instruments
Margin Refinement
890 | conical pointed | |||
---|---|---|---|---|
Fig | Shank | ISO | Color | Ø |
Friction Grip | ||||
890F | FG | 806 314 160 514 – | 010 | |
890EF | FG | 806 314 160 504 – | 010 | |
890UF | FG | 806 314 160 494 – | 010 | |
L mm | 4,0 | |||
Content | 5 |
V-Taper Gold
V-Taper Gold, designed from advanced metallurgy, helps build smooth straight-line access and increases flexibility and cutting efficacy. Great taper design allows for large canal shaping.
Low Speed Contra Angle 1 : 5
1:5 L Contra Angle with LED 10.000 – 200.000 rpm
Four holes spray
Highly enhance the cooling effect
Fiber optic
To provide high illumination in the patients’ mouth during treatment
Precise gear production
Swiss made equipment to guarantee the accuracy of gears
100% 1:5 increasing rate
Strong in cutting power and high efficiency
5 pcs German bearings
Fantastic performance in torque, vibration, noise, durability and little temperature increasing rate
Cylindrical, Side And End Cutting 21 Steel Instruments


Cylindrical, Side And End Cutting 21 Steel Instruments
These instruments should be conditioned using a rust protection spray to avoid the formation of black spots/margins or oxidation areas during preparation of non-stainless steel instruments in an autoclave/ steam steriliser.
21 | cylindrical, side and end cutting | ||||||||
---|---|---|---|---|---|---|---|---|---|
Fig | Shank | ISO | Ø | ||||||
Straight Handpiece | |||||||||
21 | HP | 310 104 107 006 – | 010 | 012 | 014 | 016 | 018 | 021 | 023 |
US-No. | 57 | 58 | 59 | 60 | 61 | 62 | |||
Lmm | 4.2 | 4.5 | 4.8 | 5.1 | 5.4 | 5.7 | 6.0 | ||
Content | 5 | 5 | 5 | 5 | 5 | 5 | 5 |
Disc Standard, Peripheral Cutting 505 Abrasives


Disc Standard, Peripheral Cutting 505 Abrasives
The nylon separating discs, consisting of a phenolic resin and silicon carbide, are ideal for separating and preparing porcelain with minimal heat build up and without contaminating grinding marks.
505 | disc standard, peripheral cutting | ||
---|---|---|---|
Fig | Shank | ISO | Ø |
Unmounted | |||
505 | UM | 653 900 327 524 – | 220 |
L mm | 0.6 | ||
Content | 100 |
Meliodent Heat Cure
Meliodent – Cost-Effective Production Of Dentures
A denture base material designed by Heraeus Kulzer to make technicians working environment safer. By containing only organic pigments. Meliodent is free from cadmium. The surfance of the denture has perfect properties that allows excellent oral hygiene.
The large variety of colours satisfies almost all needs. Whether clear, standard pink or exotic colours – almost all regional colour exceptions can be satisfied. Compared to other products, Meliodent Heat Cure plays a special role as a denture material : it is most probably the only material with such a large variety of colours!
Benefits at a glance :
Features | Benefits |
---|---|
Meliodents super-fine polymer gives a superb flow | Trial closures may become unnecessary; displaced teeth and raised bite during flasking can be a thing of the past |
Meliodent has a short dough time 6 minutes at 23°C | Allows the busy technician to save time by packing dentures earlier than with other acrylics |
Meliodent has a long working time up to 30 minutes plus (depends on room temperature) | High versatile working – Can be cured using the boiling technique or by any other curing cycle |
Meliodent is economical priced for use in the dental laboratory | A superior product with a competitive edge |
Meliodent has a unique co-polymer formula | This gives exceptional surface and smoothness characteristics. Less plaque build up and superior tissue compatibility means healthier patients |
Paladent 20
Dental acrylic for fabrication of full and partial dentures
Paladent 20 – its well-balanced properties make it economical to use and guarantee high-quality dentures at a reasonable price.
Paladent 20 has very good mechanical properties. It can be processed easily without additional equipment. It’s plastic consistency allows the dough to be packed very easily. In addition, it has a very long working time of up to 30 min, allowing the production of several dentures simultaneously.
Paladent 20 has a good colour stability and a low residual monomer. These points guarantee that the patient can wear the denture for many years without any problems. The colours such as R50 veined are excellent colour matches to all other Heraeus Kulzer denture materials while R50 veined allows individual choice of colour, invisible repairs and extensions.
Meliodent Rapid Repair
Meliodent – Cost-Effective Production Of Dentures
An additional component is Meliodent Rapid Repair, an acrylic used for repairs, with material and colour properties that suit this top quality denture base material perfectly.
Dentalon Plus
DENTALON® Plus – well-established
Dentalon Plus is a well-established self-curing resin in a powder/liquid combination for the fabrication of temporary crowns and bridges.
Denture Liner





Denture Liner
Economical lining material with less stimulation, and with hardness same as the denture base
This is the hard lining material with less stimulation and hardens gradually, so that it can be taken out safely even in the case of many undercuts for partial dentures. Also by using attached self-curing accelerator, it can be as hard as the base of denture. Therefore there will be little level difference between the base and lining material at the final polish.
Contents | Powder 100 gr, liquid 100 mL, self-curing accelerator 36 gr |
Colors | Pink |
Denture Soft II





Denture Soft II
Best selling product with outstanding durability
In addition to durability, this conditioner is twice as good as a conventional one, the durability has further increased due to attached surface smoothing material
Contents | Powder 100 gr, liquid 80 mL, New top coat 6 mL |
Colors | Pink |
FD Soft





FD Soft
Acrylic soft lining material as soft as tissue conditioner
Durability is six months to a year by using with a denture cleanser Clean Soft for exclusive use.
A denture cleanser exclusively for soft lining material, “Clean Soft” should be used to prevent a lining surface of the denture from being ruined.
Acrylic soft lining material has many merits;
A denture cleanser exclusively for soft lining material, “Clean Soft” should be used to prevent a lining surface of the denture from being
Contents | Powder 110 gr, liquid 100 mL, New top coat 30 mL |
Colors | Pink |
Soft To Hard DIL





Soft To Hard DIL
The world first success in the development.
This functions as tissue conditioner first, then automatically begins self-curing a week after wearing. As it hardens after taking the functional impression, so patients feel comfortable with their denture with less pain. “Polident” with enzyme (denture cleanser) can be used from a week after wearing.
Contents | Powder 50 gr, liquid 45 mL, New top coat 30 mL |
Colors | Pink, Fiber Pink |
Peri-Resin II





Peri-Resin II
Only this resin which can make border molding and sealing of dentures
Because of its thixotropic character, border molding is easy in the early polymerizing stage.
As Peri-Resin is not sticky, so you can shape the border easily with wet fingers.
After extending and correcting the shape of peripheral edge of denture base, mucous surface might be lined using lining material such as DIL.
Contents | Powder 70 gr, liquid 50 mL, New top coat 6 ml, Syringe 2 |
Colors | Pink |
Clean Soft





Clean Soft
Denture cleanser exclusively for soft resin and durability of soft lining material has increased greatly.
This is a denture cleanser exclusively for acrylic soft lining material.
The cleaning strength is ten times stronger than that of commercially available enzymatic ones.
Length | 1,25 metre |
---|---|
Length | 1,25 metre |
Length | 1,25 metre |
Length | 1,25 metre |
Replica





Replica
Replica of denture can be made easily at chair side
This is a special resin exclusively for replica denture, which suppresses a resin contraction, increases a fitting accuracy, and gets smooth surface. Replica denture can be made easily with a flask for exclusively use and alginate impression material.
Poly Seal





Poly Seal
Fit for temporary sealing of cavity which easily comes out
Characteristics :
Contents | Powder 100 gr, Powder 250 gr Liquid 100 mL, Liquid 300 ml |
Colors | Ivory |
Snap





Snap
Total cost down with this quick self-curing resin
Self-curing resin of quick hardening comes in two colors, which are crown and gingival color.
It can be used for repair of denture and temporary crown.
Contents | Powder 100 gr, Powder 250 gr Liquid 80 mL, Liquid 300 ml |
Colors | Pink, Fiber Pink, Ivory |
Denture Gel





Denture Gel
Oral moisturizing paste suitable to patients with dentures
This oral mucosa moisturizing paste has more viscosity than conventional products, so that patients with dentures can use for denture stability. There is a small pouch type for easy carrying.
Type | Contents |
---|---|
Tube | 45 gr |
Small Pouch | 2,5 gr |
Nu Alloy ® Dp Active





Nu Alloy ® Dp Active
Nu Alloy ® dp Active is a unique or simple composition alloy, which guarantees absolute chemical homogeneity of their particles. Thanks to ideal chemical composition (45% Ag, 31% Sn and 24% Cu), eliminating the presence of gamma-2 phase of the microstructure of the amalgam due of the high copper content. This reduces the problems of fragility and instability in corrosive environments.
Nu Alloy ® Dp





Nu Alloy ® Dp
Dispersed-phase : A mixture of lathe-cut irregular particles and atomized spherical particles.
High-copper-content: >12%.
Nu Alloy® dp is a single composition alloy with absolute homogeneity of its particles.
Thanks to its optimal chemical composition (45%Ag, 31%Sn, and 24%Cu) and its high copper content, the gamma-2 phase is eliminated from the alloy microstructure. As a result of this, fragility and instability problems in corrosive environments decrease.
Its morphology is composed of atomized and lathe-cut particles which results in a fast amalgamation with its optimal 50% mercury content (Mercury-to-alloy ratio : 1:1) and improves the alloy’s physical and mechanical properties.
This alloy has a high resistance to marginal fractures, excellent adaptation and marginal sealing, thanks to the homogeneity of its particles.
Fine surface finish originated in the granulometry of its spherical and prismatic particles.
Chrome Plated Syringes





Alphacaine





Alphacaine
Indication :
Advantages :
Trending products
Go to Trending productsMeliodent Heat Cure
Meliodent – Cost-Effective Production Of Dentures
A denture base material designed by Heraeus Kulzer to make technicians working environment safer. By containing only organic pigments. Meliodent is free from cadmium. The surfance of the denture has perfect properties that allows excellent oral hygiene.
The large variety of colours satisfies almost all needs. Whether clear, standard pink or exotic colours – almost all regional colour exceptions can be satisfied. Compared to other products, Meliodent Heat Cure plays a special role as a denture material : it is most probably the only material with such a large variety of colours!
Benefits at a glance :
Features | Benefits |
---|---|
Meliodents super-fine polymer gives a superb flow | Trial closures may become unnecessary; displaced teeth and raised bite during flasking can be a thing of the past |
Meliodent has a short dough time 6 minutes at 23°C | Allows the busy technician to save time by packing dentures earlier than with other acrylics |
Meliodent has a long working time up to 30 minutes plus (depends on room temperature) | High versatile working – Can be cured using the boiling technique or by any other curing cycle |
Meliodent is economical priced for use in the dental laboratory | A superior product with a competitive edge |
Meliodent has a unique co-polymer formula | This gives exceptional surface and smoothness characteristics. Less plaque build up and superior tissue compatibility means healthier patients |
Paladent 20
Dental acrylic for fabrication of full and partial dentures
Paladent 20 – its well-balanced properties make it economical to use and guarantee high-quality dentures at a reasonable price.
Paladent 20 has very good mechanical properties. It can be processed easily without additional equipment. It’s plastic consistency allows the dough to be packed very easily. In addition, it has a very long working time of up to 30 min, allowing the production of several dentures simultaneously.
Paladent 20 has a good colour stability and a low residual monomer. These points guarantee that the patient can wear the denture for many years without any problems. The colours such as R50 veined are excellent colour matches to all other Heraeus Kulzer denture materials while R50 veined allows individual choice of colour, invisible repairs and extensions.
Meliodent Rapid Repair
Meliodent – Cost-Effective Production Of Dentures
An additional component is Meliodent Rapid Repair, an acrylic used for repairs, with material and colour properties that suit this top quality denture base material perfectly.
Dentalon Plus
DENTALON® Plus – well-established
Dentalon Plus is a well-established self-curing resin in a powder/liquid combination for the fabrication of temporary crowns and bridges.
Denture Liner





Denture Liner
Economical lining material with less stimulation, and with hardness same as the denture base
This is the hard lining material with less stimulation and hardens gradually, so that it can be taken out safely even in the case of many undercuts for partial dentures. Also by using attached self-curing accelerator, it can be as hard as the base of denture. Therefore there will be little level difference between the base and lining material at the final polish.
Contents | Powder 100 gr, liquid 100 mL, self-curing accelerator 36 gr |
Colors | Pink |
Denture Soft II





Denture Soft II
Best selling product with outstanding durability
In addition to durability, this conditioner is twice as good as a conventional one, the durability has further increased due to attached surface smoothing material
Contents | Powder 100 gr, liquid 80 mL, New top coat 6 mL |
Colors | Pink |
FD Soft





FD Soft
Acrylic soft lining material as soft as tissue conditioner
Durability is six months to a year by using with a denture cleanser Clean Soft for exclusive use.
A denture cleanser exclusively for soft lining material, “Clean Soft” should be used to prevent a lining surface of the denture from being ruined.
Acrylic soft lining material has many merits;
A denture cleanser exclusively for soft lining material, “Clean Soft” should be used to prevent a lining surface of the denture from being
Contents | Powder 110 gr, liquid 100 mL, New top coat 30 mL |
Colors | Pink |
Soft To Hard DIL





Soft To Hard DIL
The world first success in the development.
This functions as tissue conditioner first, then automatically begins self-curing a week after wearing. As it hardens after taking the functional impression, so patients feel comfortable with their denture with less pain. “Polident” with enzyme (denture cleanser) can be used from a week after wearing.
Contents | Powder 50 gr, liquid 45 mL, New top coat 30 mL |
Colors | Pink, Fiber Pink |
Peri-Resin II





Peri-Resin II
Only this resin which can make border molding and sealing of dentures
Because of its thixotropic character, border molding is easy in the early polymerizing stage.
As Peri-Resin is not sticky, so you can shape the border easily with wet fingers.
After extending and correcting the shape of peripheral edge of denture base, mucous surface might be lined using lining material such as DIL.
Contents | Powder 70 gr, liquid 50 mL, New top coat 6 ml, Syringe 2 |
Colors | Pink |
Clean Soft





Clean Soft
Denture cleanser exclusively for soft resin and durability of soft lining material has increased greatly.
This is a denture cleanser exclusively for acrylic soft lining material.
The cleaning strength is ten times stronger than that of commercially available enzymatic ones.
Length | 1,25 metre |
---|---|
Length | 1,25 metre |
Length | 1,25 metre |
Length | 1,25 metre |
Replica





Replica
Replica of denture can be made easily at chair side
This is a special resin exclusively for replica denture, which suppresses a resin contraction, increases a fitting accuracy, and gets smooth surface. Replica denture can be made easily with a flask for exclusively use and alginate impression material.
Poly Seal





Poly Seal
Fit for temporary sealing of cavity which easily comes out
Characteristics :
Contents | Powder 100 gr, Powder 250 gr Liquid 100 mL, Liquid 300 ml |
Colors | Ivory |
Snap





Snap
Total cost down with this quick self-curing resin
Self-curing resin of quick hardening comes in two colors, which are crown and gingival color.
It can be used for repair of denture and temporary crown.
Contents | Powder 100 gr, Powder 250 gr Liquid 80 mL, Liquid 300 ml |
Colors | Pink, Fiber Pink, Ivory |
Denture Gel





Denture Gel
Oral moisturizing paste suitable to patients with dentures
This oral mucosa moisturizing paste has more viscosity than conventional products, so that patients with dentures can use for denture stability. There is a small pouch type for easy carrying.
Type | Contents |
---|---|
Tube | 45 gr |
Small Pouch | 2,5 gr |
Nu Alloy ® Dp Active





Nu Alloy ® Dp Active
Nu Alloy ® dp Active is a unique or simple composition alloy, which guarantees absolute chemical homogeneity of their particles. Thanks to ideal chemical composition (45% Ag, 31% Sn and 24% Cu), eliminating the presence of gamma-2 phase of the microstructure of the amalgam due of the high copper content. This reduces the problems of fragility and instability in corrosive environments.
Nu Alloy ® Dp





Nu Alloy ® Dp
Dispersed-phase : A mixture of lathe-cut irregular particles and atomized spherical particles.
High-copper-content: >12%.
Nu Alloy® dp is a single composition alloy with absolute homogeneity of its particles.
Thanks to its optimal chemical composition (45%Ag, 31%Sn, and 24%Cu) and its high copper content, the gamma-2 phase is eliminated from the alloy microstructure. As a result of this, fragility and instability problems in corrosive environments decrease.
Its morphology is composed of atomized and lathe-cut particles which results in a fast amalgamation with its optimal 50% mercury content (Mercury-to-alloy ratio : 1:1) and improves the alloy’s physical and mechanical properties.
This alloy has a high resistance to marginal fractures, excellent adaptation and marginal sealing, thanks to the homogeneity of its particles.
Fine surface finish originated in the granulometry of its spherical and prismatic particles.
Chrome Plated Syringes





Alphacaine





Alphacaine
Indication :
Advantages :
Intraligamental Syringes



Intraligamental Syringes
Ergonomically designed, these technical syringes allow every kind of anaesthesia, especially intraligamental and intraseptal.
Intraligamental syringes
Articaine



Articaine
Indications :
Advantages :
Popular Products
Meliodent Heat Cure
Meliodent – Cost-Effective Production Of Dentures
A denture base material designed by Heraeus Kulzer to make technicians working environment safer. By containing only organic pigments. Meliodent is free from cadmium. The surfance of the denture has perfect properties that allows excellent oral hygiene.
The large variety of colours satisfies almost all needs. Whether clear, standard pink or exotic colours – almost all regional colour exceptions can be satisfied. Compared to other products, Meliodent Heat Cure plays a special role as a denture material : it is most probably the only material with such a large variety of colours!
Benefits at a glance :
Features | Benefits |
---|---|
Meliodents super-fine polymer gives a superb flow | Trial closures may become unnecessary; displaced teeth and raised bite during flasking can be a thing of the past |
Meliodent has a short dough time 6 minutes at 23°C | Allows the busy technician to save time by packing dentures earlier than with other acrylics |
Meliodent has a long working time up to 30 minutes plus (depends on room temperature) | High versatile working – Can be cured using the boiling technique or by any other curing cycle |
Meliodent is economical priced for use in the dental laboratory | A superior product with a competitive edge |
Meliodent has a unique co-polymer formula | This gives exceptional surface and smoothness characteristics. Less plaque build up and superior tissue compatibility means healthier patients |
Paladent 20
Dental acrylic for fabrication of full and partial dentures
Paladent 20 – its well-balanced properties make it economical to use and guarantee high-quality dentures at a reasonable price.
Paladent 20 has very good mechanical properties. It can be processed easily without additional equipment. It’s plastic consistency allows the dough to be packed very easily. In addition, it has a very long working time of up to 30 min, allowing the production of several dentures simultaneously.
Paladent 20 has a good colour stability and a low residual monomer. These points guarantee that the patient can wear the denture for many years without any problems. The colours such as R50 veined are excellent colour matches to all other Heraeus Kulzer denture materials while R50 veined allows individual choice of colour, invisible repairs and extensions.
Meliodent Rapid Repair
Meliodent – Cost-Effective Production Of Dentures
An additional component is Meliodent Rapid Repair, an acrylic used for repairs, with material and colour properties that suit this top quality denture base material perfectly.
Dentalon Plus
DENTALON® Plus – well-established
Dentalon Plus is a well-established self-curing resin in a powder/liquid combination for the fabrication of temporary crowns and bridges.
Denture Liner





Denture Liner
Economical lining material with less stimulation, and with hardness same as the denture base
This is the hard lining material with less stimulation and hardens gradually, so that it can be taken out safely even in the case of many undercuts for partial dentures. Also by using attached self-curing accelerator, it can be as hard as the base of denture. Therefore there will be little level difference between the base and lining material at the final polish.
Contents | Powder 100 gr, liquid 100 mL, self-curing accelerator 36 gr |
Colors | Pink |
Denture Soft II





Denture Soft II
Best selling product with outstanding durability
In addition to durability, this conditioner is twice as good as a conventional one, the durability has further increased due to attached surface smoothing material
Contents | Powder 100 gr, liquid 80 mL, New top coat 6 mL |
Colors | Pink |
FD Soft





FD Soft
Acrylic soft lining material as soft as tissue conditioner
Durability is six months to a year by using with a denture cleanser Clean Soft for exclusive use.
A denture cleanser exclusively for soft lining material, “Clean Soft” should be used to prevent a lining surface of the denture from being ruined.
Acrylic soft lining material has many merits;
A denture cleanser exclusively for soft lining material, “Clean Soft” should be used to prevent a lining surface of the denture from being
Contents | Powder 110 gr, liquid 100 mL, New top coat 30 mL |
Colors | Pink |
Soft To Hard DIL





Soft To Hard DIL
The world first success in the development.
This functions as tissue conditioner first, then automatically begins self-curing a week after wearing. As it hardens after taking the functional impression, so patients feel comfortable with their denture with less pain. “Polident” with enzyme (denture cleanser) can be used from a week after wearing.
Contents | Powder 50 gr, liquid 45 mL, New top coat 30 mL |
Colors | Pink, Fiber Pink |
Peri-Resin II





Peri-Resin II
Only this resin which can make border molding and sealing of dentures
Because of its thixotropic character, border molding is easy in the early polymerizing stage.
As Peri-Resin is not sticky, so you can shape the border easily with wet fingers.
After extending and correcting the shape of peripheral edge of denture base, mucous surface might be lined using lining material such as DIL.
Contents | Powder 70 gr, liquid 50 mL, New top coat 6 ml, Syringe 2 |
Colors | Pink |
Clean Soft





Clean Soft
Denture cleanser exclusively for soft resin and durability of soft lining material has increased greatly.
This is a denture cleanser exclusively for acrylic soft lining material.
The cleaning strength is ten times stronger than that of commercially available enzymatic ones.
Length | 1,25 metre |
---|---|
Length | 1,25 metre |
Length | 1,25 metre |
Length | 1,25 metre |
Replica





Replica
Replica of denture can be made easily at chair side
This is a special resin exclusively for replica denture, which suppresses a resin contraction, increases a fitting accuracy, and gets smooth surface. Replica denture can be made easily with a flask for exclusively use and alginate impression material.
Poly Seal





Poly Seal
Fit for temporary sealing of cavity which easily comes out
Characteristics :
Contents | Powder 100 gr, Powder 250 gr Liquid 100 mL, Liquid 300 ml |
Colors | Ivory |
Snap





Snap
Total cost down with this quick self-curing resin
Self-curing resin of quick hardening comes in two colors, which are crown and gingival color.
It can be used for repair of denture and temporary crown.
Contents | Powder 100 gr, Powder 250 gr Liquid 80 mL, Liquid 300 ml |
Colors | Pink, Fiber Pink, Ivory |
Denture Gel





Denture Gel
Oral moisturizing paste suitable to patients with dentures
This oral mucosa moisturizing paste has more viscosity than conventional products, so that patients with dentures can use for denture stability. There is a small pouch type for easy carrying.
Type | Contents |
---|---|
Tube | 45 gr |
Small Pouch | 2,5 gr |
Nu Alloy ® Dp Active





Nu Alloy ® Dp Active
Nu Alloy ® dp Active is a unique or simple composition alloy, which guarantees absolute chemical homogeneity of their particles. Thanks to ideal chemical composition (45% Ag, 31% Sn and 24% Cu), eliminating the presence of gamma-2 phase of the microstructure of the amalgam due of the high copper content. This reduces the problems of fragility and instability in corrosive environments.
Nu Alloy ® Dp





Nu Alloy ® Dp
Dispersed-phase : A mixture of lathe-cut irregular particles and atomized spherical particles.
High-copper-content: >12%.
Nu Alloy® dp is a single composition alloy with absolute homogeneity of its particles.
Thanks to its optimal chemical composition (45%Ag, 31%Sn, and 24%Cu) and its high copper content, the gamma-2 phase is eliminated from the alloy microstructure. As a result of this, fragility and instability problems in corrosive environments decrease.
Its morphology is composed of atomized and lathe-cut particles which results in a fast amalgamation with its optimal 50% mercury content (Mercury-to-alloy ratio : 1:1) and improves the alloy’s physical and mechanical properties.
This alloy has a high resistance to marginal fractures, excellent adaptation and marginal sealing, thanks to the homogeneity of its particles.
Fine surface finish originated in the granulometry of its spherical and prismatic particles.
Chrome Plated Syringes





Alphacaine





Alphacaine
Indication :
Advantages :