Impression Material
Showing all 28 results
-
Impression Material, Materials / Medicament
Aroma Fine Plus
Alginate impression material
- Advanced formulation
- Easy and rapid powder incorporation into water within just 30 seconds
- Dust free formulation allowing fast and vigorous mixing for a smooth mixture without bubbles
- Ideal thixotropic property:
– Does not leak down the patient’s throat during impression taking
– Under pressure the alginate flows into the narrowest spaces for highest detail reproduction - Laboratory optimized:
– Compatible with a wide range of type IV stones for better detail reproduction
– Smooth model surface - Spearmint flavour for patient comfort
- Available in 2 setting types:
– Normal Set (pink) 120 seconds
– Fast Set (green) 90 seconds
SKU: n/a -
Impression Material, Materials / Medicament
Exabite II NDS
Exabite II NDS is an improved, addition reaction Vinyl Polysiloxane (VPS) impression material that has significant handling and accuracy advances, extrudes easier, and sets hard very quickly. This product was developed especially for occlusal registrations.
- Mixing and application directly from the cartridge
- Thixotropic properties with an ideal balance between stability and fluidity
- High stability for safe transfer of models to an articulator
- Easy trimming and carving
SKU: n/a -
Impression Material, Materials / Medicament
Exaflex
Exaflex is a significantly advanced, addition reaction silicone (platinum catalyzed) with outstanding physical properties, optimum handling and accuracy characteristics. The reaction silicone also has a unique combination of innovative, clinical advantages for impression taking. EXAFLEX Vinyl Polysiloxane (VPS) impression materials produce crisp, extraordinarily smooth and precise impressions for models, crowns, bridges and dentures.
- Hydrophilic
- Immediate pour
- High tear strength
- Accurate impressions
- Easy to mix
- Optimized thixotropic properties
- Extended working time
- Sharp setting curve
- Hydrophilic properties
- Extremely high precision
- Ideal affinity to modelling stone materials
- High recovery from deformation
- High dimensional stability
- High elasticity
- Very tear resistant
- Can be disinfected
SKU: n/a -
Impression Material, Materials / Medicament
Examix NDS
Examix NDS is an advanced, addition reaction (platinum catalyzed) Vinyl Polysiloxane (VPS) impression material that demonstrates outstanding physical properties. This product also has a unique combination of innovative and clinical advantages for impression taking. It produces crisp, extraordinary smooth and highly precise impressions for models, crown and bridge, dentures and inlays and onlays.
- Non-slumping
- Virtually tasteless and odorless
- Unsurpassed dimensional stability
- Patented hydrogen scavenger formula
- Excellent elastic recovery and tear strength
- Thixotropic, ideal consistency and flow under pressure makes EXAMIX NDS easy to handle and extremely accurate
- Hydrophilic and thixotropic properties
- Exact reproduction of detail
- High elasticity and tear resistant
- Easy removal from the mouth
- High dimensional stability, uniform flow
- Problem free impression taking
- Hydrogen scavenger formulation, immediate pouring with gypsum
- Very good adhesion to all GC A-silicone impression materials
- Part of a complete program of impression materials
- New cartridge delivery
- Homogeneous, bubble free mixing without crossover contamination
SKU: n/a -
Impression Material, Materials / Medicament
Fit Checker Advanced
FIT CHECKER ADVANCED are Vinyl Polyether Silicone (VPES) materials that are ideal for fit-checking dentures, PFM (Porcelain-Fused-to-Metal) Restorations, ceramic prosthetics and occlusal contact. FIT CHECKER ADVANCED is ideal for fit-checking dentures and PFM Restorations. FIT CHECKER ADVANCED provide optimal flowability, excellent detail and accuracy that is not affected by saliva. The products' minimal film thickness provides excellent transparency for easy fit-checking. FIT CHECKER ADVANCED also peel away easily, leaving a clean, residue-free fitting surface. In-office adjustments are convenient and time-saving for all patients.
Fit Checker Advanced has the ideal white colour gradation for fit checking of all kinds of prosthetic works, especially complete and partial dentures and metal-based crowns and bridges.
SKU: n/a -
Impression Material, Materials / Medicament
Fit Checker Advanced Blue
FIT CHECKER ADVANCED BLUE are Vinyl Polyether Silicone (VPES) materials that are ideal for fit-checking dentures, PFM (Porcelain-Fused-to-Metal) Restorations, ceramic prosthetics and occlusal contact. FIT CHECKER ADVANCED BLUE is ideal for fit-checking ceramic prosthetics and occlusal contact). FIT CHECKER ADVANCED BLUE provide optimal flowability, excellent detail and accuracy that is not affected by saliva. The products' minimal film thickness provides excellent transparency for easy fit-checking. FIT CHECKER ADVANCED BLUE also peel away easily, leaving a clean, residue-free fitting surface. In-office adjustments are convenient and time-saving for all patients.
Fit Checker Advanced Blue has the ideal blue colour gradation for fit checking of all kinds of prosthetic works, especially resin, ceramic and zirconia-based crowns and bridges as well as bite registration and evaluation of occlusal contacts.
SKU: n/a -
Impression Material, Materials / Medicament
Flexceed
GC introduces FLEXCEED, a new vinyl polysiloxane impression material that is affordable yet accurately replicates the highest level of detail for your crown and bridge restorations.
FLEXCEED helping you achieve impressions that will exceed your expectations.
FLEXCEED, with its lowest contact angle, displaces moisture and flows into subgingival areas rather than flowing away to mucosal surfaces, thus producing accurate impression detail.
Impression you take just once, all the time.
FLEXCEED exhibits the highest tear strength to give an accurate impression detail everytime.
The subgingival and interproximal regions of the impression are often very thin and can tear during the removal of the impression. FLEXCEED has been tested to have the highest strength to resist tearing in comparison to other vps impression materials.
FLEXCEED exceeds the performance of other impression materials with two consistencies, FLEXCEED Light Body and FLEXCEED Putty, for an optimum putty-wash impression material.
- Better reproduction detail with two viscosities (Putty & Light Body)
- Exhibits pseudo-plastic properties for precision which is not found in alginates
- Superior tear strength than any other VPS material
- Better dimensional stability – multiple models can be poured upto two weeks
- Good hydrophilicity
- Compatible with gypsum products
- Superior wetting characteristics ensuring gypsum working cast is hard with smooth surface
- Can be subjected to cold sterilization without compromising the details and dimensional stability of the impression
SKU: n/a -
Impression Material, Materials / Medicament
Memoreg 2
MEMOREG® 2 – the expert for bite registration materials
With MEMOREG 2, you and dental technicians benefit from :
- Exceptional thixotropy : Its distinct thixotrophic properties increase the flow of the material under pressure. After pressure is released it becomes stable. The material also does not drip during the application and can be built-up easily.
- Easy identification of bite-through areas : Thanks to the intensive colour, the dentist immediately recognises, where the patient has bitten through thematerial.
- Comfortable Handling : The material can easily be removed from the mouth without breaking or tearing. Thanks to its final hardness of 90 Shore A, the dental technician can articulate the models correctly in relationto one another. Easy to trim and grind with burs, scissors and scalpel. MEMOREG 2 exhibits excellent dimensional stability.
The automix cartridge system saves you time and reduces the risk of registration errors. Thanks to its short time in mouth and the neutral taste and odour, patients are more at ease.
SKU: n/a -
Impression Material, Materials / Medicament
Memosil 2
MEMOSIL® 2 – the expert for special indications
MEMOSIL 2 is a transparent A-silicone for special indications. Its transparency allows optical control when positioning aids (e.g. X-ray pellets). Light-curing is possible for filling and fixative materials through placeholders with MEMOSIL 2.
The material is best suited for use as an occlusal stamp for light-curing posterior composites, an anterior stamp for provisionals, fillings and veneers, a fixation material for x-ray measuring spheres when planning implants and a transfer matrix for bracket constructions on the plaster model.
SKU: n/a -
Impression Material, Materials / Medicament
Peri Compound
PERI COMPOUND is a border moulding impression material that can be easily softened (at 53°C/125°F) and with ample plasticity to make preliminary impressions for dentures.
- Can be softened easily (at 53°C/125°F)
- Ample plasticity for muscle trimming
SKU: n/a -
-
Impression Material, Materials / Medicament
Universal VPS Adhesive
Universal vinyl polysiloxane adhesive to assist bonding of VPS impression material to the tray to ensure accurate impressions.
- Coat all impression trays (including perforated and custom trays)
- Prevent pull-away and distortion during impression removal
SKU: n/a -
Impression Material, Materials / Medicament
Variotime
The right impression everytime.
The VPS precision impression material Variotime combines outstanding precision and process-oriented adaptability for excellent impressions as the base for precise-fitting prosthetics.
The innovative setting time concept features variable working time of 1:00 min – 2:30 min combined with an always short intraoral setting time of 2:30 min. 3 different delivery systems including automatic mixing as well as the compact allrounder system setup with 6 various viscosities enable easy, effi cient and safe processing of Variotime.
Variotime combines more than 25 years of Heraeus know-how in A-Silicones and experience with precision impression material.
- Crown and bridge impressions
- Inlay and onlay impressions
- Implant impressions
- Fixation and transfer impressions
- Functional impressions
SKU: n/a -
-
-
-
-
-
Impression Material
Xantalgin Crono
Xantalgin® – the fine-paste alginate for sensitive patients.
It shows a high level of accuracy and is particularly suitable for sensitive patients due to its soft starting consistency. The dust free and clean mixing is easy and comfortable
We use high quality seaweed from preferred cultivation areas as a basis for our alginate impression material. These alginates last longer without preservatives. Since they do not contain any chemical disinfectants, they are skin and gingiva friendly. Their mild peppermint taste also makes the impression more pleasant for the patient. Xantalgin is best suited for documentation, analysis, planning, opposing bite and working model.
SKU: n/a -
Impression Material, Materials / Medicament
Xantalgin Select
Xantalgin® – the fine-paste alginate for sensitive patients.
It shows a high level of accuracy and is particularly suitable for sensitive patients due to its soft starting consistency. The dust free and clean mixing is easy and comfortable
We use high quality seaweed from preferred cultivation areas as a basis for our alginate impression material. These alginates last longer without preservatives. Since they do not contain any chemical disinfectants, they are skin and gingiva friendly. Their mild peppermint taste also makes the impression more pleasant for the patient. Xantalgin is best suited for documentation, analysis, planning, opposing bite and working model.
SKU: n/a
