MAKE A STATEMENT
UP TO 40% OFF
STANDARD
Product Carousel Tabs
EC 60 – Acidic Intense
EC 60 – Acidic Intense
Cleaning Chemistry, Cleaning Chemistry, Medicine, Dental Laboratory, medicine, dental laboratoryEC 60 – Acidic Intense is suitable for basic acidic cleaning of medical and dental laboratory instruments, prostheses and workpieces made of stainless steel, glass and plastics.
EC 60 – Acidic Intense is used for acid-based cleaning of medical and dental laboratory instruments, prostheses and tools made from stainless steel, glass or plastic. In combination with ultrasound EC 60 reliably removes contaminants and acid-soluble cements even in hard-to-reach areas, such as corners, edges and joints.
Rusted instruments should first be pre-cleaned separately with EC 60. EC 60 also thoroughly removes brown/gray deposits left by disinfectants and cleaning agents after autoclaving, tarnished areas or autoclaved blood spots. We recommend to thoroughly clean medical instruments with an acid-based product approximately every 6 months.
EC 55 – Instruments & Burrs Disinfection
EC 55 – Instruments & Burrs Disinfection
Cleaning Chemistry, Cleaning Chemistry, Medicine, Dental Laboratory, medicine, dental laboratoryEC 55 – Instruments & Burrs Disinfection is a concentrate for disinfectant cleaning in an immersion bath with and without ultrasound and is used for cleaning general and surgical medical instruments and specifically for rotating dental instruments and endoscopes.
EC 55 – Instruments & Burrs Disinfection is a concentrate for disinfectant cleaning in immersion baths with or without ultrasound. It is also used to clean both general and surgical medical instruments, in particular rotating dental instruments (drills, burs, root canal instruments) and endoscopes made from stainless steel, steel, carbide (incl. diamond-studded models), plastic or ceramic.
The EC 55 cleaning concentrate targets blood, proteins, saliva as well as tissue and bone residues.
EC 35 – Prostheses Daily
EC 35 – Prostheses Daily
Cleaning Chemistry, Cleaning Chemistry, Medicine, Dental Laboratory, medicine, dental laboratoryEC 35 – Prostheses Daily is used for daily, hygienic ultrasonic cleaning of dental prostheses made of metal, ceramic or plastic.
EC 35 – Prostheses Daily is used for the daily hygienic cleaning of dentures made from metal, ceramic or plastic.
This highly effective cleaner with active oxygen easily removes organic contaminants, deposits and food residues in an ultrasonic bath.
EC 25 – Alginates & Plasters
EC 25 – Alginates & Plasters
This ready-to-use detergent is ideal for the thorough ultrasonic cleaning of impression trays and dental instruments made from stainless steel, glass, ceramic or plastic.* It removes alginates and dental plaster without residue.
*Always test the compatibility of EC 25 – Alginates & Plasters with light metals (Al, Mg, Zn) and their alloys before use.
EC 10 – universal
EC 10 – universal
Elma, Elma Clean, Elma Dent Clean, Elma Med Clean, Elma EC 10, cleaning chemistry, cleaning chemistry, medicine, dental laboratory, medicine, dental laboratoryElma Dent & Med Clean EC 10 – Universal Cleaner
This universal detergent EC 10 – Universal is suitable for thorough ultrasonic cleaning of medical and dental instruments and laboratory equipment made of stainless steel, glass, plastics and ceramics. EC 10 – Universal removes blood, saliva, proteins and bone residues as well as grease, oil, grinding and polishing pastes.
Elmasteam 8 med
Elmasteam 8 med
Elmasteam, Elmasteam 8 med, MDR-compliant Steam Jet CleanerElmasteam 8 med – MDR-compliant Steam Jet Cleaner
Powerful cleaning in the CSSD
Certain instruments, such as burrs, drills and electro-surgical instruments, often do not become sufficiently clean in the standard washing and disinfecting unit. The Elmasteam 8 med* steam jet cleaner is the ideal tool to pre-clean such instruments and smoothly removes even tenacious contaminations like burnt-in tissue on electro-surgical forceps.** During cleaning, germs are reduced by 99.875 % and proteins by 97 % (Prüfinstitut HygCen Austria, 06/2017). So the valuable instruments are preserved for longer time.
The insides of hollow body instruments can be connected directly to the Luer-Lock-connection at the handpiece or can be cleaned with the optionally available adapter set.
The high performance of the Elmasteam 8 med is due to the optimised piping system with larger cross sections, the intelligent pump control, the increased heating power (60% more) as well as the optimised heating position.
The intelligent control system of the Elmasteam 8 med calculates, by means of preset water hardness and the intensity and frequency of use, the proper time for decalcification. The user is led step by step through the decalcification process. Due to this integrated decalcification programme and the protection against dry running of the heating, the Elmasteam 8 med is highly reliable and fit for use for a long time.
By taking these measures and provided that the unit is being operated properly and in one-shift operation, the usual warranty can be extended to 3 years.
Elmasonic P
Elmasonic P
Elma, Elmasonic, Elmasonic P, ultrasonic cleaning, ultrasonic cleaning deviceElmasonic P – Ultrasonic Cleaning Device
The most professional way of using ultrasound.
Equipped with special functions, the Elmasonic P units are the ideal assistant for tasks and applications in analytical and medical laboratories or for intensive cleaning in industrial areas.
The product line comprises 6 machine sizes and multi-frequency technology with 37/80 kHz for different applications. The standard applications are performed at 37 kHz while finer cleaning processes with increased cleaning time run at the high frequency of 80 kHz. The high frequency is also hardly audible (even when the cover is open). Special functions such as Sweep, Pulse and Degas can be individually activated and complete the equipment.
Elmasonic Med
Ultrasonic cleaning
according to the latest laws.
Elmasonic Med* is the series of efficient and MDR compliant ultrasonic cleaning devices (3 – 90 l). Elmasonic Med devices are used for the pre-cleaning of instruments, protheses and implants in:
Medical centers and dental practices
Hospitals and CSSDs
Dental laboratories
Foot care salons
Tattoo und piercing studios
With 37 kHz ultrasonic frequency and 5 ultrasonic modes even stubborn contaminations can be removed.
degas – Quick degassing
eco – Quiet and engergy efficient operation as well as long device service life
sweep – More consistent ultrasonic cleaning
pulse – For the stubbornes of contamination
dynamic – Automatic change between pulse and sweep modes for even better cleaning results
S1 New Bone
Sticky Bone without Blood Collection!
-Product Description
S1 Dental
* Bovine Bonegraft
* Moldable & Customizing
* Sticky bone made easily with saline or blood
Bovine Bone Mineral
•Unable to mold
No space maintenance → Mouldable & Customizing
•No adhesion, No fixation → Customizied build up
•Blood collection to make sticky bone → Sticky bone made easily with saline or bloodn
S1 has similar structural characteristics with human bones
Due to its high porosity, S1 provides the most optimal environment for promoting osteoblast adhesion, blood vessel formation, and bone regeneration.
*Excellent adhesion and fixation
*Rigid Space Maintenance
*Excellent osteoconduction
*Easy to manipulate
*Various indications
High porosity
•Percentage of porosity is more than 70%
•High porosity allows rapid penetration of growth factors
Excellent shape maintenance
• Perfect shape maintenance against high pressure from outside compared to other bone
High wettability
• Porous structure makes blood circuldlion easily
BOSS
Bovine bonegraft manufactured by Sintering Technology of MedPark
Biocompatibility
* High blood permeability, similar pH to body fluids, rapid new bone formation without inflammatory reactions
* Sticky bone formation through PRF and CGF with independent process technology
Excellent Pore Structure
* Selection of proper size of graft materials for suitable environment for bone regeneration
* Increased micropores allows the migration of osteoblasts for increasing new bone formation
Easy Manipulation
* Enhanced hydrophilicity allows user to manipulate easily
* Applicable to various indication such as Socket Preservation, Sinus lift, Periodontal Defects and Ridge Augmentation
Perforations similar to human bones
High pore rate confirmed by the Porosimeter Test
Rough surface of microstructure makes osteoblast stick to the surface easily
(* Measure the size and pore rate of pores present on the sample surface by adsorbing mercury on the specimen)
Excellent bone formation & biocompatibility* Safe and stable bonegrafts without toxicity
* Cell survival rate was equivalent to that of the Product ‘B’
* Complete safety and stability verification as bonegraft
* Excellent biocompatibility, good differentiation of osteoblasts
| Type | Product | Porosity (%) |
| Boss | 70.20 | |
| Powder | Company ‘A’ | 48.74 |
| Company ‘B’ | 36.36 |
Colla
* Stable Decomposition Period
* Space Maintenance
* Biocompatibility
* Soft & Hard type
Aesorbable collagen membrane with Medparks crosslinking technology
Biocompatibility
* Using type I bovine collagen through standardized refining process
* Biocompatibility improvement of crosslinking technology ensures safety without inflammatory reactions
Stable Decomposition Period
* Ensured biodegradation period through application of CE certified quality management standard
* Colla can stand in the body for at least 4 months
Space Maintenance
* Excellent space maintenance in bone defect
* Reliable bone regeneration effect with perfect prevention of soft tissue penetration
Excellent initial shape retention
Collagenase Degradation Test
Colla Soft
Degradation time: Soft Type 6 hours
Shape: Soft Type Maintaining 60% of its shape up to 4 hours
Colla Hard
Degradation time: Hard Type 8 hours
Shape: Maintaining 80% of its shape up to 4 hours
Collagenase?
Enzymes that break down the peptide bonds in collagen
• Better initial shape maintenance than other membranes
In Vitro Test
Mechanical test (Tensile strength)
Improving a manipulability
and ensuring a stability for external stress
* Tensile strength (tearing resistance) in hydration is higher than other products
* Securing the initial osteoblast proliferation by its stability
Degradation test (Collagenase)
Improved resistance to decomposition as structural stability is achieved by enhanced interaction between collagen molecules
* High resistance to the enzyme action of macrophage
* Helping effective new bone formation by its shape maintenance and high resistance to enzyme decomposition
The kit offers a simple, easy work flow with orange colour coding specific to the Axiom® BL 2.8 implant
Low Speed Contra Angle 1 : 5
1:5 L Contra Angle with LED 10.000 – 200.000 rpm
Four holes spray
Highly enhance the cooling effect
Fiber optic
To provide high illumination in the patients’ mouth during treatment
Precise gear production
Swiss made equipment to guarantee the accuracy of gears
100% 1:5 increasing rate
Strong in cutting power and high efficiency
5 pcs German bearings
Fantastic performance in torque, vibration, noise, durability and little temperature increasing rate
EC 60 – Acidic Intense
EC 60 – Acidic Intense
Cleaning Chemistry, Cleaning Chemistry, Medicine, Dental Laboratory, medicine, dental laboratoryEC 60 – Acidic Intense is suitable for basic acidic cleaning of medical and dental laboratory instruments, prostheses and workpieces made of stainless steel, glass and plastics.
EC 60 – Acidic Intense is used for acid-based cleaning of medical and dental laboratory instruments, prostheses and tools made from stainless steel, glass or plastic. In combination with ultrasound EC 60 reliably removes contaminants and acid-soluble cements even in hard-to-reach areas, such as corners, edges and joints.
Rusted instruments should first be pre-cleaned separately with EC 60. EC 60 also thoroughly removes brown/gray deposits left by disinfectants and cleaning agents after autoclaving, tarnished areas or autoclaved blood spots. We recommend to thoroughly clean medical instruments with an acid-based product approximately every 6 months.
EC 55 – Instruments & Burrs Disinfection
EC 55 – Instruments & Burrs Disinfection
Cleaning Chemistry, Cleaning Chemistry, Medicine, Dental Laboratory, medicine, dental laboratoryEC 55 – Instruments & Burrs Disinfection is a concentrate for disinfectant cleaning in an immersion bath with and without ultrasound and is used for cleaning general and surgical medical instruments and specifically for rotating dental instruments and endoscopes.
EC 55 – Instruments & Burrs Disinfection is a concentrate for disinfectant cleaning in immersion baths with or without ultrasound. It is also used to clean both general and surgical medical instruments, in particular rotating dental instruments (drills, burs, root canal instruments) and endoscopes made from stainless steel, steel, carbide (incl. diamond-studded models), plastic or ceramic.
The EC 55 cleaning concentrate targets blood, proteins, saliva as well as tissue and bone residues.
EC 35 – Prostheses Daily
EC 35 – Prostheses Daily
Cleaning Chemistry, Cleaning Chemistry, Medicine, Dental Laboratory, medicine, dental laboratoryEC 35 – Prostheses Daily is used for daily, hygienic ultrasonic cleaning of dental prostheses made of metal, ceramic or plastic.
EC 35 – Prostheses Daily is used for the daily hygienic cleaning of dentures made from metal, ceramic or plastic.
This highly effective cleaner with active oxygen easily removes organic contaminants, deposits and food residues in an ultrasonic bath.
EC 25 – Alginates & Plasters
EC 25 – Alginates & Plasters
This ready-to-use detergent is ideal for the thorough ultrasonic cleaning of impression trays and dental instruments made from stainless steel, glass, ceramic or plastic.* It removes alginates and dental plaster without residue.
*Always test the compatibility of EC 25 – Alginates & Plasters with light metals (Al, Mg, Zn) and their alloys before use.
EC 10 – universal
EC 10 – universal
Elma, Elma Clean, Elma Dent Clean, Elma Med Clean, Elma EC 10, cleaning chemistry, cleaning chemistry, medicine, dental laboratory, medicine, dental laboratoryElma Dent & Med Clean EC 10 – Universal Cleaner
This universal detergent EC 10 – Universal is suitable for thorough ultrasonic cleaning of medical and dental instruments and laboratory equipment made of stainless steel, glass, plastics and ceramics. EC 10 – Universal removes blood, saliva, proteins and bone residues as well as grease, oil, grinding and polishing pastes.
Elmasteam 8 med
Elmasteam 8 med
Elmasteam, Elmasteam 8 med, MDR-compliant Steam Jet CleanerElmasteam 8 med – MDR-compliant Steam Jet Cleaner
Powerful cleaning in the CSSD
Certain instruments, such as burrs, drills and electro-surgical instruments, often do not become sufficiently clean in the standard washing and disinfecting unit. The Elmasteam 8 med* steam jet cleaner is the ideal tool to pre-clean such instruments and smoothly removes even tenacious contaminations like burnt-in tissue on electro-surgical forceps.** During cleaning, germs are reduced by 99.875 % and proteins by 97 % (Prüfinstitut HygCen Austria, 06/2017). So the valuable instruments are preserved for longer time.
The insides of hollow body instruments can be connected directly to the Luer-Lock-connection at the handpiece or can be cleaned with the optionally available adapter set.
The high performance of the Elmasteam 8 med is due to the optimised piping system with larger cross sections, the intelligent pump control, the increased heating power (60% more) as well as the optimised heating position.
The intelligent control system of the Elmasteam 8 med calculates, by means of preset water hardness and the intensity and frequency of use, the proper time for decalcification. The user is led step by step through the decalcification process. Due to this integrated decalcification programme and the protection against dry running of the heating, the Elmasteam 8 med is highly reliable and fit for use for a long time.
By taking these measures and provided that the unit is being operated properly and in one-shift operation, the usual warranty can be extended to 3 years.
Elmasonic P
Elmasonic P
Elma, Elmasonic, Elmasonic P, ultrasonic cleaning, ultrasonic cleaning deviceElmasonic P – Ultrasonic Cleaning Device
The most professional way of using ultrasound.
Equipped with special functions, the Elmasonic P units are the ideal assistant for tasks and applications in analytical and medical laboratories or for intensive cleaning in industrial areas.
The product line comprises 6 machine sizes and multi-frequency technology with 37/80 kHz for different applications. The standard applications are performed at 37 kHz while finer cleaning processes with increased cleaning time run at the high frequency of 80 kHz. The high frequency is also hardly audible (even when the cover is open). Special functions such as Sweep, Pulse and Degas can be individually activated and complete the equipment.
Elmasonic Med
Ultrasonic cleaning
according to the latest laws.
Elmasonic Med* is the series of efficient and MDR compliant ultrasonic cleaning devices (3 – 90 l). Elmasonic Med devices are used for the pre-cleaning of instruments, protheses and implants in:
Medical centers and dental practices
Hospitals and CSSDs
Dental laboratories
Foot care salons
Tattoo und piercing studios
With 37 kHz ultrasonic frequency and 5 ultrasonic modes even stubborn contaminations can be removed.
degas – Quick degassing
eco – Quiet and engergy efficient operation as well as long device service life
sweep – More consistent ultrasonic cleaning
pulse – For the stubbornes of contamination
dynamic – Automatic change between pulse and sweep modes for even better cleaning results
S1 New Bone
Sticky Bone without Blood Collection!
-Product Description
S1 Dental
* Bovine Bonegraft
* Moldable & Customizing
* Sticky bone made easily with saline or blood
Bovine Bone Mineral
•Unable to mold
No space maintenance → Mouldable & Customizing
•No adhesion, No fixation → Customizied build up
•Blood collection to make sticky bone → Sticky bone made easily with saline or bloodn
S1 has similar structural characteristics with human bones
Due to its high porosity, S1 provides the most optimal environment for promoting osteoblast adhesion, blood vessel formation, and bone regeneration.
*Excellent adhesion and fixation
*Rigid Space Maintenance
*Excellent osteoconduction
*Easy to manipulate
*Various indications
High porosity
•Percentage of porosity is more than 70%
•High porosity allows rapid penetration of growth factors
Excellent shape maintenance
• Perfect shape maintenance against high pressure from outside compared to other bone
High wettability
• Porous structure makes blood circuldlion easily
BOSS
Bovine bonegraft manufactured by Sintering Technology of MedPark
Biocompatibility
* High blood permeability, similar pH to body fluids, rapid new bone formation without inflammatory reactions
* Sticky bone formation through PRF and CGF with independent process technology
Excellent Pore Structure
* Selection of proper size of graft materials for suitable environment for bone regeneration
* Increased micropores allows the migration of osteoblasts for increasing new bone formation
Easy Manipulation
* Enhanced hydrophilicity allows user to manipulate easily
* Applicable to various indication such as Socket Preservation, Sinus lift, Periodontal Defects and Ridge Augmentation
Perforations similar to human bones
High pore rate confirmed by the Porosimeter Test
Rough surface of microstructure makes osteoblast stick to the surface easily
(* Measure the size and pore rate of pores present on the sample surface by adsorbing mercury on the specimen)
Excellent bone formation & biocompatibility* Safe and stable bonegrafts without toxicity
* Cell survival rate was equivalent to that of the Product ‘B’
* Complete safety and stability verification as bonegraft
* Excellent biocompatibility, good differentiation of osteoblasts
| Type | Product | Porosity (%) |
| Boss | 70.20 | |
| Powder | Company ‘A’ | 48.74 |
| Company ‘B’ | 36.36 |
Colla
* Stable Decomposition Period
* Space Maintenance
* Biocompatibility
* Soft & Hard type
Aesorbable collagen membrane with Medparks crosslinking technology
Biocompatibility
* Using type I bovine collagen through standardized refining process
* Biocompatibility improvement of crosslinking technology ensures safety without inflammatory reactions
Stable Decomposition Period
* Ensured biodegradation period through application of CE certified quality management standard
* Colla can stand in the body for at least 4 months
Space Maintenance
* Excellent space maintenance in bone defect
* Reliable bone regeneration effect with perfect prevention of soft tissue penetration
Excellent initial shape retention
Collagenase Degradation Test
Colla Soft
Degradation time: Soft Type 6 hours
Shape: Soft Type Maintaining 60% of its shape up to 4 hours
Colla Hard
Degradation time: Hard Type 8 hours
Shape: Maintaining 80% of its shape up to 4 hours
Collagenase?
Enzymes that break down the peptide bonds in collagen
• Better initial shape maintenance than other membranes
In Vitro Test
Mechanical test (Tensile strength)
Improving a manipulability
and ensuring a stability for external stress
* Tensile strength (tearing resistance) in hydration is higher than other products
* Securing the initial osteoblast proliferation by its stability
Degradation test (Collagenase)
Improved resistance to decomposition as structural stability is achieved by enhanced interaction between collagen molecules
* High resistance to the enzyme action of macrophage
* Helping effective new bone formation by its shape maintenance and high resistance to enzyme decomposition
The kit offers a simple, easy work flow with orange colour coding specific to the Axiom® BL 2.8 implant
Low Speed Contra Angle 1 : 5
1:5 L Contra Angle with LED 10.000 – 200.000 rpm
Four holes spray
Highly enhance the cooling effect
Fiber optic
To provide high illumination in the patients’ mouth during treatment
Precise gear production
Swiss made equipment to guarantee the accuracy of gears
100% 1:5 increasing rate
Strong in cutting power and high efficiency
5 pcs German bearings
Fantastic performance in torque, vibration, noise, durability and little temperature increasing rate
EC 60 – Acidic Intense
EC 60 – Acidic Intense
Cleaning Chemistry, Cleaning Chemistry, Medicine, Dental Laboratory, medicine, dental laboratoryEC 60 – Acidic Intense is suitable for basic acidic cleaning of medical and dental laboratory instruments, prostheses and workpieces made of stainless steel, glass and plastics.
EC 60 – Acidic Intense is used for acid-based cleaning of medical and dental laboratory instruments, prostheses and tools made from stainless steel, glass or plastic. In combination with ultrasound EC 60 reliably removes contaminants and acid-soluble cements even in hard-to-reach areas, such as corners, edges and joints.
Rusted instruments should first be pre-cleaned separately with EC 60. EC 60 also thoroughly removes brown/gray deposits left by disinfectants and cleaning agents after autoclaving, tarnished areas or autoclaved blood spots. We recommend to thoroughly clean medical instruments with an acid-based product approximately every 6 months.
EC 55 – Instruments & Burrs Disinfection
EC 55 – Instruments & Burrs Disinfection
Cleaning Chemistry, Cleaning Chemistry, Medicine, Dental Laboratory, medicine, dental laboratoryEC 55 – Instruments & Burrs Disinfection is a concentrate for disinfectant cleaning in an immersion bath with and without ultrasound and is used for cleaning general and surgical medical instruments and specifically for rotating dental instruments and endoscopes.
EC 55 – Instruments & Burrs Disinfection is a concentrate for disinfectant cleaning in immersion baths with or without ultrasound. It is also used to clean both general and surgical medical instruments, in particular rotating dental instruments (drills, burs, root canal instruments) and endoscopes made from stainless steel, steel, carbide (incl. diamond-studded models), plastic or ceramic.
The EC 55 cleaning concentrate targets blood, proteins, saliva as well as tissue and bone residues.
EC 35 – Prostheses Daily
EC 35 – Prostheses Daily
Cleaning Chemistry, Cleaning Chemistry, Medicine, Dental Laboratory, medicine, dental laboratoryEC 35 – Prostheses Daily is used for daily, hygienic ultrasonic cleaning of dental prostheses made of metal, ceramic or plastic.
EC 35 – Prostheses Daily is used for the daily hygienic cleaning of dentures made from metal, ceramic or plastic.
This highly effective cleaner with active oxygen easily removes organic contaminants, deposits and food residues in an ultrasonic bath.
EC 25 – Alginates & Plasters
EC 25 – Alginates & Plasters
This ready-to-use detergent is ideal for the thorough ultrasonic cleaning of impression trays and dental instruments made from stainless steel, glass, ceramic or plastic.* It removes alginates and dental plaster without residue.
*Always test the compatibility of EC 25 – Alginates & Plasters with light metals (Al, Mg, Zn) and their alloys before use.
EC 10 – universal
EC 10 – universal
Elma, Elma Clean, Elma Dent Clean, Elma Med Clean, Elma EC 10, cleaning chemistry, cleaning chemistry, medicine, dental laboratory, medicine, dental laboratoryElma Dent & Med Clean EC 10 – Universal Cleaner
This universal detergent EC 10 – Universal is suitable for thorough ultrasonic cleaning of medical and dental instruments and laboratory equipment made of stainless steel, glass, plastics and ceramics. EC 10 – Universal removes blood, saliva, proteins and bone residues as well as grease, oil, grinding and polishing pastes.
Elmasteam 8 med
Elmasteam 8 med
Elmasteam, Elmasteam 8 med, MDR-compliant Steam Jet CleanerElmasteam 8 med – MDR-compliant Steam Jet Cleaner
Powerful cleaning in the CSSD
Certain instruments, such as burrs, drills and electro-surgical instruments, often do not become sufficiently clean in the standard washing and disinfecting unit. The Elmasteam 8 med* steam jet cleaner is the ideal tool to pre-clean such instruments and smoothly removes even tenacious contaminations like burnt-in tissue on electro-surgical forceps.** During cleaning, germs are reduced by 99.875 % and proteins by 97 % (Prüfinstitut HygCen Austria, 06/2017). So the valuable instruments are preserved for longer time.
The insides of hollow body instruments can be connected directly to the Luer-Lock-connection at the handpiece or can be cleaned with the optionally available adapter set.
The high performance of the Elmasteam 8 med is due to the optimised piping system with larger cross sections, the intelligent pump control, the increased heating power (60% more) as well as the optimised heating position.
The intelligent control system of the Elmasteam 8 med calculates, by means of preset water hardness and the intensity and frequency of use, the proper time for decalcification. The user is led step by step through the decalcification process. Due to this integrated decalcification programme and the protection against dry running of the heating, the Elmasteam 8 med is highly reliable and fit for use for a long time.
By taking these measures and provided that the unit is being operated properly and in one-shift operation, the usual warranty can be extended to 3 years.
Elmasonic P
Elmasonic P
Elma, Elmasonic, Elmasonic P, ultrasonic cleaning, ultrasonic cleaning deviceElmasonic P – Ultrasonic Cleaning Device
The most professional way of using ultrasound.
Equipped with special functions, the Elmasonic P units are the ideal assistant for tasks and applications in analytical and medical laboratories or for intensive cleaning in industrial areas.
The product line comprises 6 machine sizes and multi-frequency technology with 37/80 kHz for different applications. The standard applications are performed at 37 kHz while finer cleaning processes with increased cleaning time run at the high frequency of 80 kHz. The high frequency is also hardly audible (even when the cover is open). Special functions such as Sweep, Pulse and Degas can be individually activated and complete the equipment.
Elmasonic Med
Ultrasonic cleaning
according to the latest laws.
Elmasonic Med* is the series of efficient and MDR compliant ultrasonic cleaning devices (3 – 90 l). Elmasonic Med devices are used for the pre-cleaning of instruments, protheses and implants in:
Medical centers and dental practices
Hospitals and CSSDs
Dental laboratories
Foot care salons
Tattoo und piercing studios
With 37 kHz ultrasonic frequency and 5 ultrasonic modes even stubborn contaminations can be removed.
degas – Quick degassing
eco – Quiet and engergy efficient operation as well as long device service life
sweep – More consistent ultrasonic cleaning
pulse – For the stubbornes of contamination
dynamic – Automatic change between pulse and sweep modes for even better cleaning results
S1 New Bone
Sticky Bone without Blood Collection!
-Product Description
S1 Dental
* Bovine Bonegraft
* Moldable & Customizing
* Sticky bone made easily with saline or blood
Bovine Bone Mineral
•Unable to mold
No space maintenance → Mouldable & Customizing
•No adhesion, No fixation → Customizied build up
•Blood collection to make sticky bone → Sticky bone made easily with saline or bloodn
S1 has similar structural characteristics with human bones
Due to its high porosity, S1 provides the most optimal environment for promoting osteoblast adhesion, blood vessel formation, and bone regeneration.
*Excellent adhesion and fixation
*Rigid Space Maintenance
*Excellent osteoconduction
*Easy to manipulate
*Various indications
High porosity
•Percentage of porosity is more than 70%
•High porosity allows rapid penetration of growth factors
Excellent shape maintenance
• Perfect shape maintenance against high pressure from outside compared to other bone
High wettability
• Porous structure makes blood circuldlion easily
BOSS
Bovine bonegraft manufactured by Sintering Technology of MedPark
Biocompatibility
* High blood permeability, similar pH to body fluids, rapid new bone formation without inflammatory reactions
* Sticky bone formation through PRF and CGF with independent process technology
Excellent Pore Structure
* Selection of proper size of graft materials for suitable environment for bone regeneration
* Increased micropores allows the migration of osteoblasts for increasing new bone formation
Easy Manipulation
* Enhanced hydrophilicity allows user to manipulate easily
* Applicable to various indication such as Socket Preservation, Sinus lift, Periodontal Defects and Ridge Augmentation
Perforations similar to human bones
High pore rate confirmed by the Porosimeter Test
Rough surface of microstructure makes osteoblast stick to the surface easily
(* Measure the size and pore rate of pores present on the sample surface by adsorbing mercury on the specimen)
Excellent bone formation & biocompatibility* Safe and stable bonegrafts without toxicity
* Cell survival rate was equivalent to that of the Product ‘B’
* Complete safety and stability verification as bonegraft
* Excellent biocompatibility, good differentiation of osteoblasts
| Type | Product | Porosity (%) |
| Boss | 70.20 | |
| Powder | Company ‘A’ | 48.74 |
| Company ‘B’ | 36.36 |
Colla
* Stable Decomposition Period
* Space Maintenance
* Biocompatibility
* Soft & Hard type
Aesorbable collagen membrane with Medparks crosslinking technology
Biocompatibility
* Using type I bovine collagen through standardized refining process
* Biocompatibility improvement of crosslinking technology ensures safety without inflammatory reactions
Stable Decomposition Period
* Ensured biodegradation period through application of CE certified quality management standard
* Colla can stand in the body for at least 4 months
Space Maintenance
* Excellent space maintenance in bone defect
* Reliable bone regeneration effect with perfect prevention of soft tissue penetration
Excellent initial shape retention
Collagenase Degradation Test
Colla Soft
Degradation time: Soft Type 6 hours
Shape: Soft Type Maintaining 60% of its shape up to 4 hours
Colla Hard
Degradation time: Hard Type 8 hours
Shape: Maintaining 80% of its shape up to 4 hours
Collagenase?
Enzymes that break down the peptide bonds in collagen
• Better initial shape maintenance than other membranes
In Vitro Test
Mechanical test (Tensile strength)
Improving a manipulability
and ensuring a stability for external stress
* Tensile strength (tearing resistance) in hydration is higher than other products
* Securing the initial osteoblast proliferation by its stability
Degradation test (Collagenase)
Improved resistance to decomposition as structural stability is achieved by enhanced interaction between collagen molecules
* High resistance to the enzyme action of macrophage
* Helping effective new bone formation by its shape maintenance and high resistance to enzyme decomposition
The kit offers a simple, easy work flow with orange colour coding specific to the Axiom® BL 2.8 implant
Low Speed Contra Angle 1 : 5
1:5 L Contra Angle with LED 10.000 – 200.000 rpm
Four holes spray
Highly enhance the cooling effect
Fiber optic
To provide high illumination in the patients’ mouth during treatment
Precise gear production
Swiss made equipment to guarantee the accuracy of gears
100% 1:5 increasing rate
Strong in cutting power and high efficiency
5 pcs German bearings
Fantastic performance in torque, vibration, noise, durability and little temperature increasing rate
Bestsellers
Laptops & Computers
"Bob's" Double Cord Packer Instrument
"With both blades on one end, all I have to do is twist it and keep going." Dr. Robert “Bob” Margeas
A simple twist of the instrument allows you to maneuver around the tooth without ever leaving your field of view. It’s absolutely perfect for use with loupes and microscopes. Keeping the instrument in the mouth lessens the likelihood of injuring the patient versus flipping it. Not to mention it’s faster too! It’s all possible because the combined blade length has been kept as short as possible
Narrow blades do not injure the sulcus while packing cord around small teeth and irregularities. Thin blades (serrated end) and ultra-thin blades (non-serrated end) slide along firm and healthy sulcus with less trauma. The large diameter lightweight handle’s improved ergonomics reduce hand fatigue and give you better tactile control.
4.0 mm Narrow Multi-Unt Abutment
Multiple-unit or full-arch restorations screwed on axiom® REG/PX implants presenting a limited inter-implant distance
| Gingival height (Gh) | Product reference |
|---|---|
| 0.75 mm | OPMUN0-0 |
| 1.5 mm | OPMUN0-1 |
| 2.5 mm | OPMUN0-2 |
| 3.5 mm | OPMUN0-3 |
| 4.5 mm | OPMUN0-4 |
4.0 mm Narrow Multi-Unt Secondary Components Abutments
| Components | Product reference | |
|---|---|---|
| PROSTHETIC PARTS FOR NARROW MULTI-UNIT ABUTMENTS (Ø 4.0 MM) |
Narrow Multi-Unit protective cap (titanium) Supplied STERILE |
MUNCAP |
| Narrow Multi-Unit temporary coping (titanium) Narrow Multi-Unit temporary coping (titanium) |
MUNC100 | |
| Narrow Multi-Unit PEEK temporary coping Supplied with definitive M1.4 MU Black Tite® screw |
MUNC200 | |
| Narrow Multi-Unit definitive castable coping Supplied with definitive M1.4 MU Black Tite® screw |
MUNC300 | |
| Narrow Multi-Unit definitive CoCr* cast-on coping (narrow Multi-Unit) Supplied with M1.4 MU Black Tite® definitive screw |
MUNC400 | |
| IMPRESSION TAKING ON Ø 4.0 mm NARROW MULTI-UNIT ABUTMENTS |
Pick-up transfer for narrow Multi-Unit Supplied with a short (green) and a long (green) pick-up screw. |
MUNT100 (unitary) MUNT100-4 (by 4) |
| Pop-in transfer for narrow Multi-Unit | MUNT200 (unitary) MUNT200-4 (by 4) |
|
| Narrow Multi-Unit Abutment analog supplied with M1.4 MU blue screw |
MUNA100 (unitary) MUNA100-4 (by 4) |
4.8 mm Multi-Unit Abutments
Multiple-unit or full-arch restorations screw-retained on Axiom® REG/PX implants
| Ø 4.8 mm Multi-Unit abutments | Angulation (??) | Gingival height (Gh) | Product reference |
|---|---|---|---|
| Non-indexed straight abutment Supplied with pre-assembled prehensile tool. |
0° | 0.75 mm | OPMU0-0 |
| 1.5 mm | OPMU0-1 | ||
| 2.5 mm | OPMU0-2 | ||
| 3.5 mm | OPMU0-3 | ||
| 4.5 mm | OPMU0-4 | ||
| Indexed 18° angled abutment Supplied with pre-assembled prehensile tool and M1.6 MU Black Tite® definitive screw |
18° | 1.5 mm | OPMU18-1 IN |
| 2.5 mm | OPMU18-2 IN | ||
| 3.5 mm | OPMU18-3 IN | ||
| Indexed 30° angled abutment Supplied with pre-assembled prehensile tool and M1.6 MU Black Tite® definitive screw |
30° | 0.75 mm | OPMU30-0 IN |
| 1.5 mm | OPMU30-1 IN | ||
| 2.5 mm | OPMU30-2 IN | ||
| 3.5 mm | OPMU30-3 IN | ||
| Non-indexed 18° angled abutment Supplied with pre-assembled prehensile tool and M1.6 MU Black Tite® definitive screw. |
18° | 1.5 mm | OPMU18-1 |
| 2.5 mm | OPMU18-2 | ||
| 3.5 mm | OPMU18-3 | ||
| Non-indexed 30° angled abutment Supplied with pre-assembled prehensile tool and M1.6 MU Black Tite® definitive screw |
30° | 0.75 mm | OPMU30-0 |
| 1.5 mm | OPMU30-1 | ||
| 2.5 mm | OPMU30-2 | ||
| 3.5 mm | OPMU30-3 |
4.8 mm Multi-Unit Secondary Components Abutments
Ø 4.8 mm Multi-Unit Secondary Components Abutments
| Components | Product reference | |
|---|---|---|
| PROSTHETIC PARTS FOR Ø 4.8 mm MULTI-UNIT ABUTMENTS | Titanium Multi-Unit protective cap Supplied STERILE |
MUCAP (unitary) MUCAP-4 (by 4) |
| Titanium temporary coping Supplied with M1.4 MU titanium screw |
MUC100 | |
| PEEK temporary coping Supplied with M1.4 MU titanium screw |
MUC200 | |
| Definitive castable coping Supplied with M1.4 MU Black Tite® definitive screw |
MUC300 | |
| Definitive CoCr** cast-on coping Supplied with M1.4 MU Black Tite® definitive screw |
MUC400 | |
| IMPRESSION TAKING ON Ø 4.8 mm MULTI-UNIT ABUTMENTS pick-up technique (open tray) or pop-in technique (closed tray) |
Multi-Unit Pick-up transfer Supplied with a short (yellow) and a long (yellow) pick-up screw. |
MUT100 (unitary) MUT100-4 (by 4) |
| Multi-Unit pop-in transfer | MUT200 (unitary) MUT200-4 (by 4) |
|
| Multi-Unit abutment analog Supplied with M1.4 MU laboratory blue screw |
MUA100 (unitary) MUA100-4 (by 4) |
Smartphones
"Bob's" Double Cord Packer Instrument
"With both blades on one end, all I have to do is twist it and keep going." Dr. Robert “Bob” Margeas
A simple twist of the instrument allows you to maneuver around the tooth without ever leaving your field of view. It’s absolutely perfect for use with loupes and microscopes. Keeping the instrument in the mouth lessens the likelihood of injuring the patient versus flipping it. Not to mention it’s faster too! It’s all possible because the combined blade length has been kept as short as possible
Narrow blades do not injure the sulcus while packing cord around small teeth and irregularities. Thin blades (serrated end) and ultra-thin blades (non-serrated end) slide along firm and healthy sulcus with less trauma. The large diameter lightweight handle’s improved ergonomics reduce hand fatigue and give you better tactile control.
4.0 mm Narrow Multi-Unt Abutment
Multiple-unit or full-arch restorations screwed on axiom® REG/PX implants presenting a limited inter-implant distance
| Gingival height (Gh) | Product reference |
|---|---|
| 0.75 mm | OPMUN0-0 |
| 1.5 mm | OPMUN0-1 |
| 2.5 mm | OPMUN0-2 |
| 3.5 mm | OPMUN0-3 |
| 4.5 mm | OPMUN0-4 |
4.0 mm Narrow Multi-Unt Secondary Components Abutments
| Components | Product reference | |
|---|---|---|
| PROSTHETIC PARTS FOR NARROW MULTI-UNIT ABUTMENTS (Ø 4.0 MM) |
Narrow Multi-Unit protective cap (titanium) Supplied STERILE |
MUNCAP |
| Narrow Multi-Unit temporary coping (titanium) Narrow Multi-Unit temporary coping (titanium) |
MUNC100 | |
| Narrow Multi-Unit PEEK temporary coping Supplied with definitive M1.4 MU Black Tite® screw |
MUNC200 | |
| Narrow Multi-Unit definitive castable coping Supplied with definitive M1.4 MU Black Tite® screw |
MUNC300 | |
| Narrow Multi-Unit definitive CoCr* cast-on coping (narrow Multi-Unit) Supplied with M1.4 MU Black Tite® definitive screw |
MUNC400 | |
| IMPRESSION TAKING ON Ø 4.0 mm NARROW MULTI-UNIT ABUTMENTS |
Pick-up transfer for narrow Multi-Unit Supplied with a short (green) and a long (green) pick-up screw. |
MUNT100 (unitary) MUNT100-4 (by 4) |
| Pop-in transfer for narrow Multi-Unit | MUNT200 (unitary) MUNT200-4 (by 4) |
|
| Narrow Multi-Unit Abutment analog supplied with M1.4 MU blue screw |
MUNA100 (unitary) MUNA100-4 (by 4) |
4.8 mm Multi-Unit Abutments
Multiple-unit or full-arch restorations screw-retained on Axiom® REG/PX implants
| Ø 4.8 mm Multi-Unit abutments | Angulation (??) | Gingival height (Gh) | Product reference |
|---|---|---|---|
| Non-indexed straight abutment Supplied with pre-assembled prehensile tool. |
0° | 0.75 mm | OPMU0-0 |
| 1.5 mm | OPMU0-1 | ||
| 2.5 mm | OPMU0-2 | ||
| 3.5 mm | OPMU0-3 | ||
| 4.5 mm | OPMU0-4 | ||
| Indexed 18° angled abutment Supplied with pre-assembled prehensile tool and M1.6 MU Black Tite® definitive screw |
18° | 1.5 mm | OPMU18-1 IN |
| 2.5 mm | OPMU18-2 IN | ||
| 3.5 mm | OPMU18-3 IN | ||
| Indexed 30° angled abutment Supplied with pre-assembled prehensile tool and M1.6 MU Black Tite® definitive screw |
30° | 0.75 mm | OPMU30-0 IN |
| 1.5 mm | OPMU30-1 IN | ||
| 2.5 mm | OPMU30-2 IN | ||
| 3.5 mm | OPMU30-3 IN | ||
| Non-indexed 18° angled abutment Supplied with pre-assembled prehensile tool and M1.6 MU Black Tite® definitive screw. |
18° | 1.5 mm | OPMU18-1 |
| 2.5 mm | OPMU18-2 | ||
| 3.5 mm | OPMU18-3 | ||
| Non-indexed 30° angled abutment Supplied with pre-assembled prehensile tool and M1.6 MU Black Tite® definitive screw |
30° | 0.75 mm | OPMU30-0 |
| 1.5 mm | OPMU30-1 | ||
| 2.5 mm | OPMU30-2 | ||
| 3.5 mm | OPMU30-3 |
4.8 mm Multi-Unit Secondary Components Abutments
Ø 4.8 mm Multi-Unit Secondary Components Abutments
| Components | Product reference | |
|---|---|---|
| PROSTHETIC PARTS FOR Ø 4.8 mm MULTI-UNIT ABUTMENTS | Titanium Multi-Unit protective cap Supplied STERILE |
MUCAP (unitary) MUCAP-4 (by 4) |
| Titanium temporary coping Supplied with M1.4 MU titanium screw |
MUC100 | |
| PEEK temporary coping Supplied with M1.4 MU titanium screw |
MUC200 | |
| Definitive castable coping Supplied with M1.4 MU Black Tite® definitive screw |
MUC300 | |
| Definitive CoCr** cast-on coping Supplied with M1.4 MU Black Tite® definitive screw |
MUC400 | |
| IMPRESSION TAKING ON Ø 4.8 mm MULTI-UNIT ABUTMENTS pick-up technique (open tray) or pop-in technique (closed tray) |
Multi-Unit Pick-up transfer Supplied with a short (yellow) and a long (yellow) pick-up screw. |
MUT100 (unitary) MUT100-4 (by 4) |
| Multi-Unit pop-in transfer | MUT200 (unitary) MUT200-4 (by 4) |
|
| Multi-Unit abutment analog Supplied with M1.4 MU laboratory blue screw |
MUA100 (unitary) MUA100-4 (by 4) |
Recently Viewed
"Bob's" Double Cord Packer Instrument
"With both blades on one end, all I have to do is twist it and keep going." Dr. Robert “Bob” Margeas
A simple twist of the instrument allows you to maneuver around the tooth without ever leaving your field of view. It’s absolutely perfect for use with loupes and microscopes. Keeping the instrument in the mouth lessens the likelihood of injuring the patient versus flipping it. Not to mention it’s faster too! It’s all possible because the combined blade length has been kept as short as possible
Narrow blades do not injure the sulcus while packing cord around small teeth and irregularities. Thin blades (serrated end) and ultra-thin blades (non-serrated end) slide along firm and healthy sulcus with less trauma. The large diameter lightweight handle’s improved ergonomics reduce hand fatigue and give you better tactile control.
4.0 mm Narrow Multi-Unt Abutment
Multiple-unit or full-arch restorations screwed on axiom® REG/PX implants presenting a limited inter-implant distance
| Gingival height (Gh) | Product reference |
|---|---|
| 0.75 mm | OPMUN0-0 |
| 1.5 mm | OPMUN0-1 |
| 2.5 mm | OPMUN0-2 |
| 3.5 mm | OPMUN0-3 |
| 4.5 mm | OPMUN0-4 |
4.0 mm Narrow Multi-Unt Secondary Components Abutments
| Components | Product reference | |
|---|---|---|
| PROSTHETIC PARTS FOR NARROW MULTI-UNIT ABUTMENTS (Ø 4.0 MM) |
Narrow Multi-Unit protective cap (titanium) Supplied STERILE |
MUNCAP |
| Narrow Multi-Unit temporary coping (titanium) Narrow Multi-Unit temporary coping (titanium) |
MUNC100 | |
| Narrow Multi-Unit PEEK temporary coping Supplied with definitive M1.4 MU Black Tite® screw |
MUNC200 | |
| Narrow Multi-Unit definitive castable coping Supplied with definitive M1.4 MU Black Tite® screw |
MUNC300 | |
| Narrow Multi-Unit definitive CoCr* cast-on coping (narrow Multi-Unit) Supplied with M1.4 MU Black Tite® definitive screw |
MUNC400 | |
| IMPRESSION TAKING ON Ø 4.0 mm NARROW MULTI-UNIT ABUTMENTS |
Pick-up transfer for narrow Multi-Unit Supplied with a short (green) and a long (green) pick-up screw. |
MUNT100 (unitary) MUNT100-4 (by 4) |
| Pop-in transfer for narrow Multi-Unit | MUNT200 (unitary) MUNT200-4 (by 4) |
|
| Narrow Multi-Unit Abutment analog supplied with M1.4 MU blue screw |
MUNA100 (unitary) MUNA100-4 (by 4) |
4.8 mm Multi-Unit Abutments
Multiple-unit or full-arch restorations screw-retained on Axiom® REG/PX implants
| Ø 4.8 mm Multi-Unit abutments | Angulation (??) | Gingival height (Gh) | Product reference |
|---|---|---|---|
| Non-indexed straight abutment Supplied with pre-assembled prehensile tool. |
0° | 0.75 mm | OPMU0-0 |
| 1.5 mm | OPMU0-1 | ||
| 2.5 mm | OPMU0-2 | ||
| 3.5 mm | OPMU0-3 | ||
| 4.5 mm | OPMU0-4 | ||
| Indexed 18° angled abutment Supplied with pre-assembled prehensile tool and M1.6 MU Black Tite® definitive screw |
18° | 1.5 mm | OPMU18-1 IN |
| 2.5 mm | OPMU18-2 IN | ||
| 3.5 mm | OPMU18-3 IN | ||
| Indexed 30° angled abutment Supplied with pre-assembled prehensile tool and M1.6 MU Black Tite® definitive screw |
30° | 0.75 mm | OPMU30-0 IN |
| 1.5 mm | OPMU30-1 IN | ||
| 2.5 mm | OPMU30-2 IN | ||
| 3.5 mm | OPMU30-3 IN | ||
| Non-indexed 18° angled abutment Supplied with pre-assembled prehensile tool and M1.6 MU Black Tite® definitive screw. |
18° | 1.5 mm | OPMU18-1 |
| 2.5 mm | OPMU18-2 | ||
| 3.5 mm | OPMU18-3 | ||
| Non-indexed 30° angled abutment Supplied with pre-assembled prehensile tool and M1.6 MU Black Tite® definitive screw |
30° | 0.75 mm | OPMU30-0 |
| 1.5 mm | OPMU30-1 | ||
| 2.5 mm | OPMU30-2 | ||
| 3.5 mm | OPMU30-3 |
4.8 mm Multi-Unit Secondary Components Abutments
Ø 4.8 mm Multi-Unit Secondary Components Abutments
| Components | Product reference | |
|---|---|---|
| PROSTHETIC PARTS FOR Ø 4.8 mm MULTI-UNIT ABUTMENTS | Titanium Multi-Unit protective cap Supplied STERILE |
MUCAP (unitary) MUCAP-4 (by 4) |
| Titanium temporary coping Supplied with M1.4 MU titanium screw |
MUC100 | |
| PEEK temporary coping Supplied with M1.4 MU titanium screw |
MUC200 | |
| Definitive castable coping Supplied with M1.4 MU Black Tite® definitive screw |
MUC300 | |
| Definitive CoCr** cast-on coping Supplied with M1.4 MU Black Tite® definitive screw |
MUC400 | |
| IMPRESSION TAKING ON Ø 4.8 mm MULTI-UNIT ABUTMENTS pick-up technique (open tray) or pop-in technique (closed tray) |
Multi-Unit Pick-up transfer Supplied with a short (yellow) and a long (yellow) pick-up screw. |
MUT100 (unitary) MUT100-4 (by 4) |
| Multi-Unit pop-in transfer | MUT200 (unitary) MUT200-4 (by 4) |
|
| Multi-Unit abutment analog Supplied with M1.4 MU laboratory blue screw |
MUA100 (unitary) MUA100-4 (by 4) |