Suction
Showing all 21 results
-
Equipment / Dental Unit / X-Ray / Etc, Suction
Central Separation Tank
For connection of central semi-dry suction systems to clinic suction machines V 6000 to V 18000, up to 100 workplaces. 300 liter, with one inlet for secretions (d=110 mm) and one vacuum outlet (d= 160 mm).
Dimensions : Height 145 cm, d = 64 cm, with safety switch-off when full, drain pump for automatic emptying during suction. With integrated Rinsing Set
SKU: n/a -
Equipment / Dental Unit / X-Ray / Etc, Suction
DS01
Dental electric suction machines are used in oral treatment equipment. In the process of oral treatment, oral secretions and dirty blood are produced. The machine can provide a negative pressure suction power source for the dental treatment machine to suck away foreign objects with cells and contaminated liquid and debris. It can be used in hospitals or During treatment, dental office equipment is used as a suction power source when sucking spray, saliva, blood and small particles.
DS00 series straight shaft suction machine adopts durable design concept, superior product quality, ultra-small size and easy installation and maintenance.
Model DS01 Voltage (V) 110-240 Frequency (Hz) 50/60 Power (kW) 370 Vacuum (kPa) -12 Max Air Flow 450 L/min Net Weight (Kg) 22 Dimension (mm) 320*320*520 Simultaneity Factor For 1 chair
SKU: n/a -
Equipment / Dental Unit / X-Ray / Etc, Suction
DS1000
During treatment, doctors may use ultrasonic scalers, 3-way syringes, high and low speed handpieces and many other types of equipment spray to generate a large amount of water mist combined with bacteria, saliva, and blood from the patients mouth wich will produce aerosols. The external oral suction removes these aerosols to prevent cross-infection betwen doctors and patients.
Suction hoods are not autoclavable and should be cleaned by 75% alcohol or non-corrosive disinfectant by wiping or atomization.
With strong suction vaccum pressure and large flow rate, which greatly reduces the risk of cross infection between doctors and patients.
The aerosol and air entered the suction unit is filtered through primary filter and HEPA strainer, sterilized by ultraviolet rays, and then discharge through a large amount of plasma sterilization and purification.
Maintain :
Change UV lamp and HEPA filter once a year.
Clean the free arm by non-organic solvent disinfection
- Primary Filter
- UV-C strilization
- Plasma generator sterilization
- Fiberglass + HEPA filter
- Max Vaccum : -20KPa
- Max Airflow : 3000 L/min
- Rated Voltage ：110-220V
- Rated Power ： 500-1200W
- Suction pipe diameter : 50 mm
- Net weight : 26kg
- Gross weight : 34kg
- Dimensions ：320*320*850 mm
- HEPA Filter efficiency :≥99.97%
- Package : main unit 56*39*78 cm
- Free arms 5 joints: 23*23*78 cm
- Suction cover : 2 pcs (small & big)
SKU: n/a -
Equipment / Dental Unit / X-Ray / Etc, Suction
DS1000 Standard
During treatment, doctors may use ultrasonic scalers, 3-way syringes, high and low speed handpieces and many other types of equipment spray to generate a large amount of water mist combined with bacteria, saliva, and blood from the patients mouth wich will produce aerosols. The external oral suction removes these aerosols to prevent cross-infection betwen doctors and patients.
Suction hoods are not autoclavable and should be cleaned by 75% alcohol or non-corrosive disinfectant by wiping or atomization.
With strong suction vaccum pressure and large flow rate, which greatly reduces the risk of cross infection between doctors and patients.
The aerosol and air entered the suction unit is filtered through primary filter and HEPA strainer, sterilized by ultraviolet rays, and then discharge through a large amount of plasma sterilization and purification.
- Primary Filter
- HEPA filter
- UV-C strilization
- Plasma generator sterilization
- Carbon + HEPA filter
- Max Vaccum : -22KPa
- Max Airflow : 3000 L/min
- Rated Voltage ：110-220V
- Rated Power ： 500-1150W
- Suction pipe diameter : 50 mm
- Net weight : 26kg
- Gross weight : 34kg
- Dimensions ：320*320*850 mm
- HEPA Filter efficiency :≥99.97%
- Package : main unit 56*39*78 cm
- Free arms 5 joints: 23*23*78 cm
- Suction cover : L type (small size)
- Suction cover : O type (big size)
SKU: n/a -
Equipment / Dental Unit / X-Ray / Etc, Suction
DS3000
Feature :
- Hand sensor switch (non-touch control)
- Multiple effective sterilization (UVC, LED, Plasma, filter)
- Noise as low as 53DB (≤60DB for normal use)
- A strong brushless motor
- Comprehensive upgraded sterilization devices
- Excellent ergonomic design
- Multi function control panel, digital screen control
- Voltage / Frequency : AC 110-220 V / 50-60 Hz
- Power : 1000 VA
- Noise : ≤60DB
- Suction rate / wind pressure : 3000L/min (5kPa)
- Maz suction pressure : -22kPa
- Filter level : HEPA 14
- Filter frequency : ≥99.995%
- Net weight (without free arm) : 34kg
- Dimension (without free arm) : 325*325*875 mm
- Free arm length : 1570 mm
SKU: n/a -
Equipment / Dental Unit / X-Ray / Etc, Suction
DS301
- Integral type suction
- Noise reduction, low vibration
- Doors can be completely disassembled, easy to install
- Separator and drainage bottle can be removed at any time to clean and install
Suction DS301 Voltage (V/Hz) 110 (60Hz) 220V (50/60Hz) Power (kW) 0.45 0.37/0.45 Max A (A) 6 2.7/3 Max Airflow (L/min) 300 Vaccum (kPa) -11 Net Weight (Kg) 43 Gross Weight (Kg) 59 Noise (db/A) ≤ 60 Package Dimension (mm) 610*360*645 For Dental Chairs (Unit) 1
SKU: n/a -
Equipment / Dental Unit / X-Ray / Etc, Suction
DS3701M
- Integral type suction
- Noise reduction, low vibration
- Doors can be completely disassembled, easy to install
- Separator and drainage bottle can be removed at any time to clean and install
Suction DS3701M Voltage (V/Hz) 110 (60Hz) 220V (50/60Hz) Power (kW) 0.45 0.37/0.45 Max A (A) 6 2.7/3 Max Airflow (L/min) 300 Vaccum (kPa) -11 Net Weight (Kg) 26.5 Gross Weight (Kg) 38 Noise (db/A) ≤ 60 Package Dimension (mm) 360*300*784 For Dental Chairs (Unit) 1
SKU: n/a -
Equipment / Dental Unit / X-Ray / Etc, Suction
V 1200 S
The dry V Suction Systems
Up to 6 treatment positions, with 4 operators working simultaneously 400 V 3 ∼, 50 Hz, with condensate separator and control unit 400 V 3 ∼ // 24 V ∼
Sophisticated technology with convincing suction power.
High-quality, robust drive motors, reliable continuous operation, great suction power within seconds, and flexible installation options.
Amazing power
The dry air suction systems by Dürr Dental are extremely powerful yet run really quietly. The V suction units are called dry systems because the aspirated substances are quickly guided into a separation/amalgam elimination unit. These components are integrated into the Dental Unit. Only dry air reaches the suction unit.
Seven to eight hours of continuous operation are not unusual. This places high demands on the technology. Dürr Dental V suction machines fulfil these requirements tirelessly. The contact-free, rotating turbine wheels generate the required vacuum and flow rate (suction power). A reliable electric motor enables non-stop operation. To reliably protect against condensated water, all models are fitted with a condensate separator as standard.
Model V 1200 S Voltage (V 3~) 400 Frequency (Hz) 50 Current consumption (A) 3.6 Power (kW) 2 Dimensions without condensate separator (H x W x D cm) 52 x 41 x 42 Dimensions with condensate separator (H x W x D cm) 57 x 62 x 42 Dimensions with housing (H x W x D cm) 55 x 49 x 53 Vacuum (mbar) AAV 1) 170 Weight without housing (kg) 32 Weight with housing (kg) 48 Noise level 2) without housing dB(A) approx. 66 Noise level 2) with housing dB(A) approx. 59 1) AAV = auxiliary air valve
2) The noise level is influenced by the room in which the system is installed. In a reverberant room (e.g. with tiled walls) the noise level may be higher.
SKU: n/a -
Equipment / Dental Unit / X-Ray / Etc, Suction
V 12000
Clinic Suction System
Group with 4 suction machines incl. control unit with vacuum controller and 1 bacteria filter, remote monitoring possible.
For up to 70 workplaces with max. 40 operators at the same time.
Flexible solutions to meet your needs
Dürr Dental offers vacuum systems for dry and semi-dry suction systems. The flexible solutions are available in 6 variants and suitable for up to 100 treatment units. The integrated exhaust air bacteria filter only has to be changed every 3,500 hours. The power side channel compressors are precisely adjusted to the requriements by the intelligent PLC system.
High reliability, low power consumption
A sensor switches the custion motors on and off as required, allowing efficient use to be made of the electrical energy. The PLC system controls the equal use of the V machines, increasing their overall service lie and reliability. An electrical and mechanical auxiliary air valve provides additional cooling for the motots and a constant suction power.
Everything's under control thanks to the PLC system
Which suction motor is running? Momentary vacuum? Bakteria filter change? These questions are answered for the technician by the clinic display in the intelligent programmable logic controller. This allows him to monitor the complete suction or compressed air system at any time and to easily detect faults. The visualisation system from Dürr Dental even allows all the clinic systems to be remotely monitored.
Model V 12000 Voltage (V 3~) 400 Frequency (Hz) 50 / 60 Electrical power (kW) 10,8 / 14,4 Current consumption (A) 21,1 / 25,1 Dimensions (H x W x D cm) 180 x 130 x 130 Space requirements (H x W x D cm) 180 x 230 x 230 Weight (kg) 335 Vacuum (mbar) 160 Noise level dB(A) 76 without housing, 63 with housing Suction exhaust air connection (mm) 2x 110 and 1x 160
SKU: n/a -
Equipment / Dental Unit / X-Ray / Etc, Suction
V 15000
Clinic Suction System
Group with 5 suction machines incl. control unit with vacuum controller and 2 bacteria filters, remote monitoring possible.
For up to 80 workplaces with max. 50 operators at the same time.
Flexible solutions to meet your needs
Dürr Dental offers vacuum systems for dry and semi-dry suction systems. The flexible solutions are available in 6 variants and suitable for up to 100 treatment units. The integrated exhaust air bacteria filter only has to be changed every 3,500 hours. The power side channel compressors are precisely adjusted to the requriements by the intelligent PLC system.
High reliability, low power consumption
A sensor switches the custion motors on and off as required, allowing efficient use to be made of the electrical energy. The PLC system controls the equal use of the V machines, increasing their overall service lie and reliability. An electrical and mechanical auxiliary air valve provides additional cooling for the motots and a constant suction power.
Everything's under control thanks to the PLC system
Which suction motor is running? Momentary vacuum? Bakteria filter change? These questions are answered for the technician by the clinic display in the intelligent programmable logic controller. This allows him to monitor the complete suction or compressed air system at any time and to easily detect faults. The visualisation system from Dürr Dental even allows all the clinic systems to be remotely monitored.
Model V 15000 Voltage (V 3~) 400 Frequency (Hz) 50 / 60 Electrical power (kW) 13,4 / 17,9 Current consumption (A) 26,6 / 30,6 Dimensions (H x W x D cm) 180 x 130 x 130 Space requirements (H x W x D cm) 180 x 230 x 230 Weight (kg) 375 Vacuum (mbar) 160 Noise level dB(A) 77 without housing, 65 with housing Suction exhaust air connection (mm) 2x 110 and 1x 160
SKU: n/a -
Equipment / Dental Unit / X-Ray / Etc, Suction
V 18000
Clinic Suction System
Group with 6 suction machines incl. control unit with vacuum controller and 2 bacteria filters, remote monitoring possible.
For up to 100 workplaces with max. 60 operators at the same time.
Flexible solutions to meet your needs
Dürr Dental offers vacuum systems for dry and semi-dry suction systems. The flexible solutions are available in 6 variants and suitable for up to 100 treatment units. The integrated exhaust air bacteria filter only has to be changed every 3,500 hours. The power side channel compressors are precisely adjusted to the requriements by the intelligent PLC system.
High reliability, low power consumption
A sensor switches the custion motors on and off as required, allowing efficient use to be made of the electrical energy. The PLC system controls the equal use of the V machines, increasing their overall service lie and reliability. An electrical and mechanical auxiliary air valve provides additional cooling for the motots and a constant suction power.
Everything's under control thanks to the PLC system
Which suction motor is running? Momentary vacuum? Bakteria filter change? These questions are answered for the technician by the clinic display in the intelligent programmable logic controller. This allows him to monitor the complete suction or compressed air system at any time and to easily detect faults. The visualisation system from Dürr Dental even allows all the clinic systems to be remotely monitored.
Model V 18000 Voltage (V 3~) 400 Frequency (Hz) 50 / 60 Electrical power (kW) 16,0 / 21,4 Current consumption (A) 30,1 / 36,1 Dimensions (H x W x D cm) 180 x 130 x 130 Space requirements (H x W x D cm) 180 x 230 x 230 Weight (kg) 415 Vacuum (mbar) 160 Noise level dB(A) 78 without housing, 66 with housing Suction exhaust air connection (mm) 2x 110 and 1x 160
SKU: n/a -
Equipment / Dental Unit / X-Ray / Etc, Suction
V 2400
Clinic Suction Systems
Maximum performance for 8 therapists
The V 2400 suction machine is employed in the dry suction system.
Here the principle :
Of short transport routes for the intaken substances applies. Separation is integrated into the treatment unit and dry, clean air routes to the suction machine.
- Allows 14 treatment stations to be served
- Up to 8 operators at the same time
- Delivery is made installed on a floor installation console
- 2 condensate separators with preinstalled control cabinet
Flexible solutions to meet your needs
Dürr Dental offers vacuum systems for dry and semi-dry suction systems. The flexible solutions are available in 6 variants and suitable for up to 100 treatment units. The integrated exhaust air bacteria filter only has to be changed every 3,500 hours. The power side channel compressors are precisely adjusted to the requriements by the intelligent PLC system.
High reliability, low power consumption
A sensor switches the custion motors on and off as required, allowing efficient use to be made of the electrical energy. The PLC system controls the equal use of the V machines, increasing their overall service lie and reliability. An electrical and mechanical auxiliary air valve provides additional cooling for the motots and a constant suction power.
Everything's under control thanks to the PLC system
Which suction motor is running? Momentary vacuum? Bakteria filter change? These questions are answered for the technician by the clinic display in the intelligent programmable logic controller. This allows him to monitor the complete suction or compressed air system at any time and to easily detect faults. The visualisation system from Dürr Dental even allows all the clinic systems to be remotely monitored.
Model V 2400 Voltage (V 3~) 400 Frequency (Hz) 50/60 Current consumption (A) 5.6/6.8 Power (kW) 3.3/4.4 Dimensions (H x W x D cm) 115 x 90 x 48 Weight (kg) approx. 65 Fuse ratings (AT) 16 Medical product class IIa
SKU: n/a -
Equipment / Dental Unit / X-Ray / Etc, Suction
V 300 S
The dry V Suction Systems
For 1 operator 230 V 1, 50 Hz, with condensate separator and control electronics 230 V 1 ∼ // 24 V ∼
Sophisticated technology with convincing suction power.
High-quality, robust drive motors, reliable continuous operation, great suction power within seconds, and flexible installation options.
Amazing power
The dry air suction systems by Dürr Dental are extremely powerful yet run really quietly. The V suction units are called dry systems because the aspirated substances are quickly guided into a separation/amalgam elimination unit. These components are integrated into the Dental Unit. Only dry air reaches the suction unit.
Seven to eight hours of continuous operation are not unusual. This places high demands on the technology. Dürr Dental V suction machines fulfil these requirements tirelessly. The contact-free, rotating turbine wheels generate the required vacuum and flow rate (suction power). A reliable electric motor enables non-stop operation. To reliably protect against condensated water, all models are fitted with a condensate separator as standard.
Model V 300 S Voltage (V 1~) 230 Frequency (Hz) 50/60 Current consumption (A) 2.9/3.7 Power (kW) 0.58/0.8 Speed (rpm) 2,850 Vacuum (mbar) without AAV 180 Cyclic duration factor (S1) 100% Noise level dB(A) approx. 63, with housing approx. 54 Dimensions (H x W x D cm) 37 x 31 x 31
43 x 38 x 43 (with condensate separator)
51 x 36 x 36 (with housing)Weight (kg) 12.5, with housing 20
SKU: n/a -
Equipment / Dental Unit / X-Ray / Etc, Suction
V 600
The dry V Suction Systems
Up to 3 treatment positions, with 2 operators working simultaneously 230 V 1 ∼ , 50 Hz, with condensate separator and control unit 230 V 1 ∼ // 24 V ∼
Sophisticated technology with convincing suction power.
High-quality, robust drive motors, reliable continuous operation, great suction power within seconds, and flexible installation options.
Amazing power
The dry air suction systems by Dürr Dental are extremely powerful yet run really quietly. The V suction units are called dry systems because the aspirated substances are quickly guided into a separation/amalgam elimination unit. These components are integrated into the Dental Unit. Only dry air reaches the suction unit.
Seven to eight hours of continuous operation are not unusual. This places high demands on the technology. Dürr Dental V suction machines fulfil these requirements tirelessly. The contact-free, rotating turbine wheels generate the required vacuum and flow rate (suction power). A reliable electric motor enables non-stop operation. To reliably protect against condensated water, all models are fitted with a condensate separator as standard.
Model V 600 Voltage (V 1~/V 3~) 230/400 Frequency (Hz) 50/ 50/60 Current consumption (A) 5.0/ 1.8 – 4.5 Power (kW) 1.1/ 1.1 – 1.4 Speed (rpm) 2,850 Vacuum (mbar) with AAV 170 Cyclic duration factor (S1) 100% Noise level dB(A) approx. 63, with housing approx. 55
approx. 63, with housing 55Dimensions (H x W x D cm) 50 x 42 x 41
57 x 62 x 41 (with condensate separator)
50 x 49 x 53 (with housing)Weight (kg) 23, with housing 33
SKU: n/a -
Equipment / Dental Unit / X-Ray / Etc, Suction
V 6000
Clinic Suction System
Group with 2 suction machines incl. control unit with vacuum controller and bacteria filter, remote monitoring possible.
For up to 30 workplaces with max. 20 operators at the same time.
Flexible solutions to meet your needs
Dürr Dental offers vacuum systems for dry and semi-dry suction systems. The flexible solutions are available in 6 variants and suitable for up to 100 treatment units. The integrated exhaust air bacteria filter only has to be changed every 3,500 hours. The power side channel compressors are precisely adjusted to the requriements by the intelligent PLC system.
High reliability, low power consumption
A sensor switches the custion motors on and off as required, allowing efficient use to be made of the electrical energy. The PLC system controls the equal use of the V machines, increasing their overall service lie and reliability. An electrical and mechanical auxiliary air valve provides additional cooling for the motots and a constant suction power.
Everything's under control thanks to the PLC system
Which suction motor is running? Momentary vacuum? Bakteria filter change? These questions are answered for the technician by the clinic display in the intelligent programmable logic controller. This allows him to monitor the complete suction or compressed air system at any time and to easily detect faults. The visualisation system from Dürr Dental even allows all the clinic systems to be remotely monitored.
Model V 6000 Voltage (V 3~) 400 Frequency (Hz) 50/60 Electrical power (kW) 5,6 / 7.4 Current consumption (A) 12,1 / 14,1 Dimensions (H x W x D cm) 115 x 130 x 130 Space requirements (H x W x D cm) 115 x 230 x 230 Weight (kg) 175 Vacuum (mbar) 160 Noise level dB(A) 73 without housing, 64 with housing Suction exhaust air connection (mm) 110/110 (DN 100)
SKU: n/a -
Equipment / Dental Unit / X-Ray / Etc, Suction
V 900 S
The dry V Suction Systems
Up to 5 treatment positions, with 3 operators working simultaneously 230 V 1 ∼, 50 Hz, with condensate separator and control unit 230 V 1 ∼ // 24 V ∼
Sophisticated technology with convincing suction power.
High-quality, robust drive motors, reliable continuous operation, great suction power within seconds, and flexible installation options.
Amazing power
The dry air suction systems by Dürr Dental are extremely powerful yet run really quietly. The V suction units are called dry systems because the aspirated substances are quickly guided into a separation/amalgam elimination unit. These components are integrated into the Dental Unit. Only dry air reaches the suction unit.
Seven to eight hours of continuous operation are not unusual. This places high demands on the technology. Dürr Dental V suction machines fulfil these requirements tirelessly. The contact-free, rotating turbine wheels generate the required vacuum and flow rate (suction power). A reliable electric motor enables non-stop operation. To reliably protect against condensated water, all models are fitted with a condensate separator as standard.
Model V 900 S Voltage (V 1~/V 3~) 230/400 Frequency (Hz) 50 Current consumption (A) 6.3/3.6 Power (kW) 1.8/1.97 Speed (rpm) 2,850 Vacuum (mbar) with AAV 170 Cyclic duration factor (S1) 100% Noise level dB(A) approx. 65, with housing approx. 58 Dimensions (H x W x D cm) 52 x 42 x 42
57 x 62 x 42 (with condensate separator)
55 x 49 x 53 (with housing)Weight (kg) 33, with housing 49
SKU: n/a -
Equipment / Dental Unit / X-Ray / Etc, Suction
V 9000
Clinic Suction System
Group with 3 suction machines incl. control unit with vacuum controller and bacteria filter, remote monitoring possible.
For up to 50 workplaces with max. 30 operators at the same time.
Flexible solutions to meet your needs
Dürr Dental offers vacuum systems for dry and semi-dry suction systems. The flexible solutions are available in 6 variants and suitable for up to 100 treatment units. The integrated exhaust air bacteria filter only has to be changed every 3,500 hours. The power side channel compressors are precisely adjusted to the requriements by the intelligent PLC system.
High reliability, low power consumption
A sensor switches the custion motors on and off as required, allowing efficient use to be made of the electrical energy. The PLC system controls the equal use of the V machines, increasing their overall service lie and reliability. An electrical and mechanical auxiliary air valve provides additional cooling for the motots and a constant suction power.
Everything's under control thanks to the PLC system
Which suction motor is running? Momentary vacuum? Bakteria filter change? These questions are answered for the technician by the clinic display in the intelligent programmable logic controller. This allows him to monitor the complete suction or compressed air system at any time and to easily detect faults. The visualisation system from Dürr Dental even allows all the clinic systems to be remotely monitored.
Model V 9000 Voltage (V 3~) 400 Frequency (Hz) 50 / 60 Electrical power (kW) 8,2 / 10,9 Current consumption (A) 16,6 / 19,6 Dimensions (H x W x D cm) 115 x 130 x 130 Space requirements (H x W x D cm) 115 x 230 x 230 Weight (kg) 215 Vacuum (mbar) 160 Noise level dB(A) 75 without housing, 66 with housing Suction exhaust air connection (mm) 110/110 (DN 100)
SKU: n/a -
Equipment / Dental Unit / X-Ray / Etc, Suction
VS 1200 S
The wet VS Suction Systems
Central Combined Suction Unit up to 6 treatment positions, with 4 operators simultaneously, 400 V 3 ∼ , 50 Hz, with control unit 400 V 3 ∼ / 24 V ∼ . One CA 4 may serve up to 5 workplaces, resp. Dental Units.
Dürr Dental provides the right suction solution for every surgery.
When it comes to the remodelling or modernization of a dental surgery, VS combination suction units can be used even in difficult installation conditions.
Powerful and cost-effective
“VS“ stands for the combination of vacuum generation and separation. VS suction units are called wet systems because the entire suction and separation function is combined centrally in a VS suction unit on one drive shaft. This allows significant savings to be made. For example, there is no need for separate separation machines on the Dental Units and some of the operating costs of traditional systems – such as water ring pumps – are no longer relevant.
Dürr Dental VS Suction Systems are power packs that you can rely on. They can aspirate large quantities of liquids and serve up to four operators at the same time without interruption. Thanks to the integrated two-stage separation system, the aspiration of secretions and blood foam into the turbine space is reliably prevented. The drive of the combination suction unit runs smoothly and without vibration and is extremely reliable. All important functional elements have corrosion protection finish, which contribute to their extraordinary long service lives.
Perfect pipe system cleaning and hygiene
Central installation in a dental surgery with several treatment rooms places great demands on the cleaning and hygiene of the pipe system. With this in mind, Dürr Dental has developed the “tidal wave“. This is a flow accelerator. It collects the waste water from the spittoon so that it can then be aspirated in flushes by the central suction unit. As a result, the suction unit independently eliminates the risk of deposits, unpleasant odours, and hygiene relevant situations.
Model VS 1200 S Voltage (V 3~) 400 Frequency (Hz) 50 Current consumption (A) 3.8 Power (kW) 2 Dimensions without condensate separator (H x W x D cm) 55 x 41 x 42 Dimensions with condensate separator (H x W x D cm) 57 x 62 x 42 Dimensions with housing (H x W x D cm) 106 x 64 x 61 Vacuum (mbar) AAV 1) 170 Weight without housing (kg) 32 Weight with housing (kg) 48 Noise level 2) without housing dB(A) approx. 66 Noise level 2) with housing dB(A) approx. 59 Separation rate 3) With CA 4: 98.9% 1) AAV = auxiliary air valve
2) The noise level is influenced by the room in which the system is installed. In a reverberant room (e.g. with tiled walls) the noise level may be higher.
3) Separation rates measured by the TÜV [technical monitoring authority] Essen in accordance with the German standard test at maximum rate of fluid flow.
SKU: n/a -
Equipment / Dental Unit / X-Ray / Etc, Suction
VS 300 S
The wet VS Suction Systems
Combined suction unit for 1 operator, with control electronics 230 V 1 ∼ 24 V ∼ , 50 Hz.
Dürr Dental provides the right suction solution for every surgery.
When it comes to the remodelling or modernization of a dental surgery, VS combination suction units can be used even in difficult installation conditions.
Powerful and cost-effective
“VS“ stands for the combination of vacuum generation and separation. VS suction units are called wet systems because the entire suction and separation function is combined centrally in a VS suction unit on one drive shaft. This allows significant savings to be made. For example, there is no need for separate separation machines on the Dental Units and some of the operating costs of traditional systems – such as water ring pumps – are no longer relevant.
Dürr Dental VS Suction Systems are power packs that you can rely on. They can aspirate large quantities of liquids and serve up to four operators at the same time without interruption. Thanks to the integrated two-stage separation system, the aspiration of secretions and blood foam into the turbine space is reliably prevented. The drive of the combination suction unit runs smoothly and without vibration and is extremely reliable. All important functional elements have corrosion protection finish, which contribute to their extraordinary long service lives.
Perfect pipe system cleaning and hygiene
Central installation in a dental surgery with several treatment rooms places great demands on the cleaning and hygiene of the pipe system. With this in mind, Dürr Dental has developed the “tidal wave“. This is a flow accelerator. It collects the waste water from the spittoon so that it can then be aspirated in flushes by the central suction unit. As a result, the suction unit independently eliminates the risk of deposits, unpleasant odours, and hygiene relevant situations.
Model VS 300 S Voltage (V 1~) 230 Frequency (Hz) 50/60 Current consumption (A) 2.9/3.7 Power (kW) 0.58/0.8 Speed (rpm) 2,850 Vacuum (mbar) 180 Cyclic duration factor (S1) 100 % Max. fluid flow rate (l/min) 4 Noise level dB(A) approx. 63 – 65, with housing approx. 54 – 56 Dimensions (H x W x D cm) 37 x 31 x 31
51 x 36 x 36 (with housing)Weight (kg) 12.5, with housing 20
SKU: n/a -
Equipment / Dental Unit / X-Ray / Etc, Suction
VS 600
The wet VS Suction Systems
Central Combined Suction Unit up to 3 treatment positions, with 2 operators working simultaneously 230 V 1 ∼ , 50 Hz, with control unit 230 V 1 ∼ // 24 V ∼
Dürr Dental provides the right suction solution for every surgery.
When it comes to the remodelling or modernization of a dental surgery, VS combination suction units can be used even in difficult installation conditions.
Powerful and cost-effective
“VS“ stands for the combination of vacuum generation and separation. VS suction units are called wet systems because the entire suction and separation function is combined centrally in a VS suction unit on one drive shaft. This allows significant savings to be made. For example, there is no need for separate separation machines on the Dental Units and some of the operating costs of traditional systems – such as water ring pumps – are no longer relevant.
Dürr Dental VS Suction Systems are power packs that you can rely on. They can aspirate large quantities of liquids and serve up to four operators at the same time without interruption. Thanks to the integrated two-stage separation system, the aspiration of secretions and blood foam into the turbine space is reliably prevented. The drive of the combination suction unit runs smoothly and without vibration and is extremely reliable. All important functional elements have corrosion protection finish, which contribute to their extraordinary long service lives.
Perfect pipe system cleaning and hygiene
Central installation in a dental surgery with several treatment rooms places great demands on the cleaning and hygiene of the pipe system. With this in mind, Dürr Dental has developed the “tidal wave“. This is a flow accelerator. It collects the waste water from the spittoon so that it can then be aspirated in flushes by the central suction unit. As a result, the suction unit independently eliminates the risk of deposits, unpleasant odours, and hygiene relevant situations.
Model VS 600 Voltage (V 1~/V 3~) 230/400 Frequency (Hz) 50/ 50/60 Current consumption (A) 5.0/ 1.8 – 4.0 Power (kW) 1.1/ 1.1/1.4 Speed (rpm) 2,850 Cyclic duration factor (S1) 100 % Noise level without housing dB(A) approx. 63/approx. 63 Noise level with housing dB(A) approx. 55/approx. 55 Dimensions without housing (H x W x D cm) 50 x 42 x 41 Dimensions with housing (H x W x D cm) 65 x 49 x 53 Weight without housing (kg) 25 Weight with housing (kg) 45
SKU: n/a -
Equipment / Dental Unit / X-Ray / Etc, Suction
VS 900 S
The wet VS Suction Systems
Central Combined Suction Unit up to 5 treatment positions, with 3 operators working simultaneously 230 V 1 ∼ , 50 Hz, with control unit 230 V 1 ∼ // 24 V ∼
Dürr Dental provides the right suction solution for every surgery.
When it comes to the remodelling or modernization of a dental surgery, VS combination suction units can be used even in difficult installation conditions.
Powerful and cost-effective
“VS“ stands for the combination of vacuum generation and separation. VS suction units are called wet systems because the entire suction and separation function is combined centrally in a VS suction unit on one drive shaft. This allows significant savings to be made. For example, there is no need for separate separation machines on the Dental Units and some of the operating costs of traditional systems – such as water ring pumps – are no longer relevant.
Dürr Dental VS Suction Systems are power packs that you can rely on. They can aspirate large quantities of liquids and serve up to four operators at the same time without interruption. Thanks to the integrated two-stage separation system, the aspiration of secretions and blood foam into the turbine space is reliably prevented. The drive of the combination suction unit runs smoothly and without vibration and is extremely reliable. All important functional elements have corrosion protection finish, which contribute to their extraordinary long service lives.
Perfect pipe system cleaning and hygiene
Central installation in a dental surgery with several treatment rooms places great demands on the cleaning and hygiene of the pipe system. With this in mind, Dürr Dental has developed the “tidal wave“. This is a flow accelerator. It collects the waste water from the spittoon so that it can then be aspirated in flushes by the central suction unit. As a result, the suction unit independently eliminates the risk of deposits, unpleasant odours, and hygiene relevant situations.
Model VS 900 S Voltage (V 1~/V 3~) 230/400 Frequency (Hz) 50 Current consumption (A) 7.4/3.6 Power (kW) 1.68/1.8 Vacuum (mbar) AAV 170 Speed (rpm) 2,850 Max. fluid flow rate (l/min) 16 Cyclic duration factor (S1) 100 % Noise level without housing dB(A) approx. 65 Noise level with housing dB(A) approx. 58 Dimensions without housing (H x W x D cm) 55 x 41 x 42 Dimensions with housing (H x W x D cm) 55 x 49 x 53 Weight without housing (kg) 33 Weight with housing (kg) 49
SKU: n/a
