Product Carousel Tabs
Bestsellers
Smartphones
-
Acrylics / Resin, Laboratory, Laboratory Material
Meliodent Heat Cure
Meliodent – Cost-Effective Production Of Dentures
A denture base material designed by Heraeus Kulzer to make technicians working environment safer. By containing only organic pigments. Meliodent is free from cadmium. The surfance of the denture has perfect properties that allows excellent oral hygiene.
The large variety of colours satisfies almost all needs. Whether clear, standard pink or exotic colours – almost all regional colour exceptions can be satisfied. Compared to other products, Meliodent Heat Cure plays a special role as a denture material : it is most probably the only material with such a large variety of colours!
Benefits at a glance :
- Super fine polymer gives a superb flow
- Short dough time 6 minutes at 23°C
- Long working time up to 30 minutes plus (depends on room temperature)
- Economical for use in the dental laboratory
- Unique co-polymer formula
- Broad spectrum of colour shades to suit all patients
- Exceptional smooth surface
Features Benefits Meliodents super-fine polymer gives a superb flow Trial closures may become unnecessary; displaced teeth and raised bite during flasking can be a thing of the past Meliodent has a short dough time 6 minutes at 23°C Allows the busy technician to save time by packing dentures earlier than with other acrylics Meliodent has a long working time up to 30 minutes plus (depends on room temperature) High versatile working – Can be cured using the boiling technique or by any other curing cycle Meliodent is economical priced for use in the dental laboratory A superior product with a competitive edge Meliodent has a unique co-polymer formula This gives exceptional surface and smoothness characteristics. Less plaque build up and superior tissue compatibility means healthier patients
SKU: n/a -
Acrylics / Resin, Laboratory, Laboratory Material
Paladent 20
Dental acrylic for fabrication of full and partial dentures
Paladent 20 – its well-balanced properties make it economical to use and guarantee high-quality dentures at a reasonable price.
Paladent 20 has very good mechanical properties. It can be processed easily without additional equipment. It’s plastic consistency allows the dough to be packed very easily. In addition, it has a very long working time of up to 30 min, allowing the production of several dentures simultaneously.
Paladent 20 has a good colour stability and a low residual monomer. These points guarantee that the patient can wear the denture for many years without any problems. The colours such as R50 veined are excellent colour matches to all other Heraeus Kulzer denture materials while R50 veined allows individual choice of colour, invisible repairs and extensions.
- Long working time up to 30 minutes (depends on room temperature)
- Superiour mechanical properties
- Excellent colour stability and low residual monomer
- Economical for use in the dental laboratory
- Exceptional smooth surface
SKU: n/a -
Acrylics / Resin, Laboratory, Laboratory Material
Meliodent Rapid Repair
Meliodent – Cost-Effective Production Of Dentures
An additional component is Meliodent Rapid Repair, an acrylic used for repairs, with material and colour properties that suit this top quality denture base material perfectly.
- An economical advantage for use in the dental laboratory
- Broad spectrum of colour shades to suit all patients
- Short polymerisation time (ten minutes)
SKU: n/a -
Acrylics / Resin, Laboratory, Laboratory Material
Dentalon Plus
DENTALON® Plus – well-established
Dentalon Plus is a well-established self-curing resin in a powder/liquid combination for the fabrication of temporary crowns and bridges.
- High gloss polish
- High mechanical stability
- Individual colour adaptation possible
- High colour stability due to amine free catalyst system
SKU: n/a
Laptops & Computers
-
Acrylics / Resin, Laboratory, Laboratory Material
Meliodent Heat Cure
Meliodent – Cost-Effective Production Of Dentures
A denture base material designed by Heraeus Kulzer to make technicians working environment safer. By containing only organic pigments. Meliodent is free from cadmium. The surfance of the denture has perfect properties that allows excellent oral hygiene.
The large variety of colours satisfies almost all needs. Whether clear, standard pink or exotic colours – almost all regional colour exceptions can be satisfied. Compared to other products, Meliodent Heat Cure plays a special role as a denture material : it is most probably the only material with such a large variety of colours!
Benefits at a glance :
- Super fine polymer gives a superb flow
- Short dough time 6 minutes at 23°C
- Long working time up to 30 minutes plus (depends on room temperature)
- Economical for use in the dental laboratory
- Unique co-polymer formula
- Broad spectrum of colour shades to suit all patients
- Exceptional smooth surface
Features Benefits Meliodents super-fine polymer gives a superb flow Trial closures may become unnecessary; displaced teeth and raised bite during flasking can be a thing of the past Meliodent has a short dough time 6 minutes at 23°C Allows the busy technician to save time by packing dentures earlier than with other acrylics Meliodent has a long working time up to 30 minutes plus (depends on room temperature) High versatile working – Can be cured using the boiling technique or by any other curing cycle Meliodent is economical priced for use in the dental laboratory A superior product with a competitive edge Meliodent has a unique co-polymer formula This gives exceptional surface and smoothness characteristics. Less plaque build up and superior tissue compatibility means healthier patients
SKU: n/a -
Acrylics / Resin, Laboratory, Laboratory Material
Paladent 20
Dental acrylic for fabrication of full and partial dentures
Paladent 20 – its well-balanced properties make it economical to use and guarantee high-quality dentures at a reasonable price.
Paladent 20 has very good mechanical properties. It can be processed easily without additional equipment. It’s plastic consistency allows the dough to be packed very easily. In addition, it has a very long working time of up to 30 min, allowing the production of several dentures simultaneously.
Paladent 20 has a good colour stability and a low residual monomer. These points guarantee that the patient can wear the denture for many years without any problems. The colours such as R50 veined are excellent colour matches to all other Heraeus Kulzer denture materials while R50 veined allows individual choice of colour, invisible repairs and extensions.
- Long working time up to 30 minutes (depends on room temperature)
- Superiour mechanical properties
- Excellent colour stability and low residual monomer
- Economical for use in the dental laboratory
- Exceptional smooth surface
SKU: n/a -
Acrylics / Resin, Laboratory, Laboratory Material
Meliodent Rapid Repair
Meliodent – Cost-Effective Production Of Dentures
An additional component is Meliodent Rapid Repair, an acrylic used for repairs, with material and colour properties that suit this top quality denture base material perfectly.
- An economical advantage for use in the dental laboratory
- Broad spectrum of colour shades to suit all patients
- Short polymerisation time (ten minutes)
SKU: n/a -
Acrylics / Resin, Laboratory, Laboratory Material
Dentalon Plus
DENTALON® Plus – well-established
Dentalon Plus is a well-established self-curing resin in a powder/liquid combination for the fabrication of temporary crowns and bridges.
- High gloss polish
- High mechanical stability
- Individual colour adaptation possible
- High colour stability due to amine free catalyst system
SKU: n/a
Laptops & Computers
Smartphones
Meliodent Heat Cure
Meliodent – Cost-Effective Production Of Dentures
A denture base material designed by Heraeus Kulzer to make technicians working environment safer. By containing only organic pigments. Meliodent is free from cadmium. The surfance of the denture has perfect properties that allows excellent oral hygiene.
The large variety of colours satisfies almost all needs. Whether clear, standard pink or exotic colours – almost all regional colour exceptions can be satisfied. Compared to other products, Meliodent Heat Cure plays a special role as a denture material : it is most probably the only material with such a large variety of colours!
Benefits at a glance :
| Features | Benefits |
|---|---|
| Meliodents super-fine polymer gives a superb flow | Trial closures may become unnecessary; displaced teeth and raised bite during flasking can be a thing of the past |
| Meliodent has a short dough time 6 minutes at 23°C | Allows the busy technician to save time by packing dentures earlier than with other acrylics |
| Meliodent has a long working time up to 30 minutes plus (depends on room temperature) | High versatile working – Can be cured using the boiling technique or by any other curing cycle |
| Meliodent is economical priced for use in the dental laboratory | A superior product with a competitive edge |
| Meliodent has a unique co-polymer formula | This gives exceptional surface and smoothness characteristics. Less plaque build up and superior tissue compatibility means healthier patients |
Paladent 20
Dental acrylic for fabrication of full and partial dentures
Paladent 20 – its well-balanced properties make it economical to use and guarantee high-quality dentures at a reasonable price.
Paladent 20 has very good mechanical properties. It can be processed easily without additional equipment. It’s plastic consistency allows the dough to be packed very easily. In addition, it has a very long working time of up to 30 min, allowing the production of several dentures simultaneously.
Paladent 20 has a good colour stability and a low residual monomer. These points guarantee that the patient can wear the denture for many years without any problems. The colours such as R50 veined are excellent colour matches to all other Heraeus Kulzer denture materials while R50 veined allows individual choice of colour, invisible repairs and extensions.
Meliodent Rapid Repair
Meliodent – Cost-Effective Production Of Dentures
An additional component is Meliodent Rapid Repair, an acrylic used for repairs, with material and colour properties that suit this top quality denture base material perfectly.
Dentalon Plus
DENTALON® Plus – well-established
Dentalon Plus is a well-established self-curing resin in a powder/liquid combination for the fabrication of temporary crowns and bridges.
Denture Liner
Denture Liner
Economical lining material with less stimulation, and with hardness same as the denture base
This is the hard lining material with less stimulation and hardens gradually, so that it can be taken out safely even in the case of many undercuts for partial dentures. Also by using attached self-curing accelerator, it can be as hard as the base of denture. Therefore there will be little level difference between the base and lining material at the final polish.
| Contents | Powder 100 gr, liquid 100 mL, self-curing accelerator 36 gr |
| Colors | Pink |
Denture Soft II
Denture Soft II
Best selling product with outstanding durability
In addition to durability, this conditioner is twice as good as a conventional one, the durability has further increased due to attached surface smoothing material
| Contents | Powder 100 gr, liquid 80 mL, New top coat 6 mL |
| Colors | Pink |
FD Soft
FD Soft
Acrylic soft lining material as soft as tissue conditioner
Durability is six months to a year by using with a denture cleanser Clean Soft for exclusive use.
A denture cleanser exclusively for soft lining material, “Clean Soft” should be used to prevent a lining surface of the denture from being ruined.
Acrylic soft lining material has many merits;
A denture cleanser exclusively for soft lining material, “Clean Soft” should be used to prevent a lining surface of the denture from being
| Contents | Powder 110 gr, liquid 100 mL, New top coat 30 mL |
| Colors | Pink |
Soft To Hard DIL
Soft To Hard DIL
The world first success in the development.
This functions as tissue conditioner first, then automatically begins self-curing a week after wearing. As it hardens after taking the functional impression, so patients feel comfortable with their denture with less pain. “Polident” with enzyme (denture cleanser) can be used from a week after wearing.
| Contents | Powder 50 gr, liquid 45 mL, New top coat 30 mL |
| Colors | Pink, Fiber Pink |
Peri-Resin II
Peri-Resin II
Only this resin which can make border molding and sealing of dentures
Because of its thixotropic character, border molding is easy in the early polymerizing stage.
As Peri-Resin is not sticky, so you can shape the border easily with wet fingers.
After extending and correcting the shape of peripheral edge of denture base, mucous surface might be lined using lining material such as DIL.
| Contents | Powder 70 gr, liquid 50 mL, New top coat 6 ml, Syringe 2 |
| Colors | Pink |
Clean Soft
Clean Soft
Denture cleanser exclusively for soft resin and durability of soft lining material has increased greatly.
This is a denture cleanser exclusively for acrylic soft lining material.
The cleaning strength is ten times stronger than that of commercially available enzymatic ones.
| Length | 1,25 metre |
|---|---|
| Length | 1,25 metre |
| Length | 1,25 metre |
| Length | 1,25 metre |
Replica
Replica
Replica of denture can be made easily at chair side
This is a special resin exclusively for replica denture, which suppresses a resin contraction, increases a fitting accuracy, and gets smooth surface. Replica denture can be made easily with a flask for exclusively use and alginate impression material.
Poly Seal
Poly Seal
Fit for temporary sealing of cavity which easily comes out
Characteristics :
| Contents | Powder 100 gr, Powder 250 gr Liquid 100 mL, Liquid 300 ml |
| Colors | Ivory |
Snap
Snap
Total cost down with this quick self-curing resin
Self-curing resin of quick hardening comes in two colors, which are crown and gingival color.
It can be used for repair of denture and temporary crown.
| Contents | Powder 100 gr, Powder 250 gr Liquid 80 mL, Liquid 300 ml |
| Colors | Pink, Fiber Pink, Ivory |
Denture Gel
Denture Gel
Oral moisturizing paste suitable to patients with dentures
This oral mucosa moisturizing paste has more viscosity than conventional products, so that patients with dentures can use for denture stability. There is a small pouch type for easy carrying.
| Type | Contents |
|---|---|
| Tube | 45 gr |
| Small Pouch | 2,5 gr |
Nu Alloy ® Dp Active
Nu Alloy ® Dp Active
Nu Alloy ® dp Active is a unique or simple composition alloy, which guarantees absolute chemical homogeneity of their particles. Thanks to ideal chemical composition (45% Ag, 31% Sn and 24% Cu), eliminating the presence of gamma-2 phase of the microstructure of the amalgam due of the high copper content. This reduces the problems of fragility and instability in corrosive environments.
Nu Alloy ® Dp
Nu Alloy ® Dp
Dispersed-phase : A mixture of lathe-cut irregular particles and atomized spherical particles.
High-copper-content: >12%.
Nu Alloy® dp is a single composition alloy with absolute homogeneity of its particles.
Thanks to its optimal chemical composition (45%Ag, 31%Sn, and 24%Cu) and its high copper content, the gamma-2 phase is eliminated from the alloy microstructure. As a result of this, fragility and instability problems in corrosive environments decrease.
Its morphology is composed of atomized and lathe-cut particles which results in a fast amalgamation with its optimal 50% mercury content (Mercury-to-alloy ratio : 1:1) and improves the alloy’s physical and mechanical properties.
This alloy has a high resistance to marginal fractures, excellent adaptation and marginal sealing, thanks to the homogeneity of its particles.
Fine surface finish originated in the granulometry of its spherical and prismatic particles.
Recently Viewed
NIS-SIM Simulator
A practical solution for preclinical training
Allows students to practice basic and advanced preclinical skills in a clinical-like environment. Gives access to a wide range of training situations using various NISSIN dental training models.
| Operating environment | Temperature: 5???40????/ Relative humidity: 30%???80% | ||
| Power source | 100/220V±10% / 50/60Hz | ||
| Input air pressure | 0.55MPa???0.7MPa (Internal pressure 0.5MPa±0.02MPa) | ||
| Water pressure | Not exceeding 0.22MPa | ||
| Dimensions | Operation position: 1,040(L)×400(W)×710???860[1](H) mm (Housing height: 480 mm) Storing position: 620(L)×400(W)×1030(H) mm |
||
| Weight | Approx. 50 kg | ||
| Height adjustment range | 150 mm ± 2mm | ||
| Phantom tilt range | -5° to +85° from horizontal plane |
Due to product improvement, product specifications and design may change without prior notice.
Prosthetic Restoration Jaw Model (32 teeth) [CON2001-UL-HD-FEM-32]
![Prosthetic Restoration Jaw Model (32 teeth) [CON2001-UL-HD-FEM-32]](https://dental.bintangsaudara.com/wp-content/uploads/2021/04/product_1_10-12-2018-1544434733-300x300.jpg)
Prosthetic Restoration Jaw Model (32 teeth) [CON2001-UL-HD-FEM-32]
DA7001
Intelligent and Digital Control System Oil – Free Air Compressor
Advanced micro- computer control system
Stable and long life-span working system :
Easy and simple maintenance
| Air Compressor | DA7001 |
|---|---|
| Voltage (V/Hz) | 110/220V (50/60Hz) |
| Power (kW) | 0.75kW/1HP |
| Max Airflow (L/min) | 152 |
| Airflow @ 7 bar (L/min) | 50 |
| Tank (L) | 30 |
| Net Weight (Kg) | 28 |
| Gross Weight (Kg) | 33 |
| Noise (db/A) | ≤ 59 |
| Unit Dimension (mm) | 410*410*650 |
| Package Dimension (mm) | 450*450*730 |
| Dryer (D) | ????/td> |
| Soundproof Cabinet (CS) | ????/td> |
| For Dental Chairs (Unit) | 1 |
Composi-Tight 3D Fusion Matrix Kit GA-FX-MFF-00
Composi-Tight 3D Fusion Matrix Kit GA-FX-MFF-00
Composi-Tight® 3D Fusion™ Wedges fuse two materials together to produce the perfect combination of adaptability and retention.
GA-FX-MFF-00 2 Ring (Blue & Orange), 25 Bands, 20 Wedges and 1 RF
X-Cut, Medium CX77 Carbide Instruments
Standard Titanium Abutments
Single-unit or multiple-unit restorations
– reduce intra-oral handlings.
– preserve soft tissues.
– Specific transfers and analogs (Cf. page 8).
– Castable copings for single-unit or multiple-unit restoration, no rework necessary.
– Protective caps.
| Diameter in mm | Gingival height (Gh) | Coronal height (Ch) = 4 mm | Coronal height (Ch) = 6 mm |
|---|---|---|---|
| Product reference | Product reference | ||
| Ø 3.4 | 1.5 mm | OPST314 | OPST316 |
| 2.5 mm | OPST324 | OPST326 | |
| 3.5 mm | OPST334 | OPST336 | |
| Ø 4.0 | 1.5 mm | OPST414 | OPST416 |
| 2.5 mm | OPST424 | OPST426 | |
| 3.5 mm | OPST434 | OPST436 | |
| Ø 5.0 | 1.5 mm | OPST514 | OPST516 |
| 2.5 mm | OPST524 | OPST526 | |
| 3.5 mm | OPST534 | OPST536 | |
| Ø 6.0 | 1.5 mm | OPST614 | OPST616 |
| 2.5 mm | OPST624 | OPST626 | |
| 3.5 mm | OPST634 | OPST636 |
JP90 Handheld Injector
The JP90 Handheld Injector and JP90 Flask were designed to work in conjunction with the TCS Digital Furnace to inject thermoplastic clasps, 1-3 teeth unilaterals and up to 5 teeth saddles. Using this handheld injector completely eliminates the need to flask the case using the traditional method, saving time and money.
Injects: Clasps, 1-3 tooth unilaterals, up to 5 consecutive tooth partials/saddles, saddles for combination cases, and repairs
Patient Education Model [PE-TDS005]
![Patient Education Model [PE-TDS005]](https://dental.bintangsaudara.com/wp-content/uploads/2021/04/product_1_10-12-2018-1544415109-300x300.jpg)
Patient Education Model [PE-TDS005]
Tooth Brushing Demonstration Model [PE-STP003]
![Tooth Brushing Demonstration Model [PE-STP003]](https://dental.bintangsaudara.com/wp-content/uploads/2021/04/product_1_10-12-2018-1544423848-300x300.jpg)
Tooth Brushing Demonstration Model [PE-STP003]
Jaw Function Skull Model [ANA1001-T]
![Jaw Function Skull Model [ANA1001-T]](https://dental.bintangsaudara.com/wp-content/uploads/2021/04/product_1_10-12-2018-1544433033-300x300.jpg)
Jaw Function Skull Model [ANA1001-T]
tcs® Coool Mint Wipes
Individually wrapped, mint flavor wipes to clean and refresh appliances ON-THE-GO! Conveniently store them in purses, bags, pockets, etc. to keep appliances clean and fresh when it is most needed! Be sure you are receiving a 1-week sample packet of TCS Concentrated Dental Appliance cleaner as well as a TCS Coool Mint Wipe from your supplier with every TCS cartridge you purchase! Give these samples to your dentist for them to give to the patient. Item # 4504/20FR-01 20 per box Item # 4504/FR-01 70 per box
Air Motor M2 Internal Spray
The low speed dental handpiece with internal water spray features flexible and convenient operation.
Compared with the external water spray, the internal water spray has no water pipe connection on the handpiece motor. The water passes directly through the inner of the motor. Thus, it can realize 360 degree rotation of the motor at the same time. It features better maneuverability.