MAKE A STATEMENT
UP TO 40% OFF
STANDARD
Product Carousel Tabs
EC 60 – Acidic Intense
EC 60 – Acidic Intense
Cleaning Chemistry, Cleaning Chemistry, Medicine, Dental Laboratory, medicine, dental laboratoryEC 60 – Acidic Intense is suitable for basic acidic cleaning of medical and dental laboratory instruments, prostheses and workpieces made of stainless steel, glass and plastics.
EC 60 – Acidic Intense is used for acid-based cleaning of medical and dental laboratory instruments, prostheses and tools made from stainless steel, glass or plastic. In combination with ultrasound EC 60 reliably removes contaminants and acid-soluble cements even in hard-to-reach areas, such as corners, edges and joints.
Rusted instruments should first be pre-cleaned separately with EC 60. EC 60 also thoroughly removes brown/gray deposits left by disinfectants and cleaning agents after autoclaving, tarnished areas or autoclaved blood spots. We recommend to thoroughly clean medical instruments with an acid-based product approximately every 6 months.
EC 55 – Instruments & Burrs Disinfection
EC 55 – Instruments & Burrs Disinfection
Cleaning Chemistry, Cleaning Chemistry, Medicine, Dental Laboratory, medicine, dental laboratoryEC 55 – Instruments & Burrs Disinfection is a concentrate for disinfectant cleaning in an immersion bath with and without ultrasound and is used for cleaning general and surgical medical instruments and specifically for rotating dental instruments and endoscopes.
EC 55 – Instruments & Burrs Disinfection is a concentrate for disinfectant cleaning in immersion baths with or without ultrasound. It is also used to clean both general and surgical medical instruments, in particular rotating dental instruments (drills, burs, root canal instruments) and endoscopes made from stainless steel, steel, carbide (incl. diamond-studded models), plastic or ceramic.
The EC 55 cleaning concentrate targets blood, proteins, saliva as well as tissue and bone residues.
EC 35 – Prostheses Daily
EC 35 – Prostheses Daily
Cleaning Chemistry, Cleaning Chemistry, Medicine, Dental Laboratory, medicine, dental laboratoryEC 35 – Prostheses Daily is used for daily, hygienic ultrasonic cleaning of dental prostheses made of metal, ceramic or plastic.
EC 35 – Prostheses Daily is used for the daily hygienic cleaning of dentures made from metal, ceramic or plastic.
This highly effective cleaner with active oxygen easily removes organic contaminants, deposits and food residues in an ultrasonic bath.
EC 25 – Alginates & Plasters
EC 25 – Alginates & Plasters
This ready-to-use detergent is ideal for the thorough ultrasonic cleaning of impression trays and dental instruments made from stainless steel, glass, ceramic or plastic.* It removes alginates and dental plaster without residue.
*Always test the compatibility of EC 25 – Alginates & Plasters with light metals (Al, Mg, Zn) and their alloys before use.
EC 10 – universal
EC 10 – universal
Elma, Elma Clean, Elma Dent Clean, Elma Med Clean, Elma EC 10, cleaning chemistry, cleaning chemistry, medicine, dental laboratory, medicine, dental laboratoryElma Dent & Med Clean EC 10 – Universal Cleaner
This universal detergent EC 10 – Universal is suitable for thorough ultrasonic cleaning of medical and dental instruments and laboratory equipment made of stainless steel, glass, plastics and ceramics. EC 10 – Universal removes blood, saliva, proteins and bone residues as well as grease, oil, grinding and polishing pastes.
Elmasteam 8 med
Elmasteam 8 med
Elmasteam, Elmasteam 8 med, MDR-compliant Steam Jet CleanerElmasteam 8 med – MDR-compliant Steam Jet Cleaner
Powerful cleaning in the CSSD
Certain instruments, such as burrs, drills and electro-surgical instruments, often do not become sufficiently clean in the standard washing and disinfecting unit. The Elmasteam 8 med* steam jet cleaner is the ideal tool to pre-clean such instruments and smoothly removes even tenacious contaminations like burnt-in tissue on electro-surgical forceps.** During cleaning, germs are reduced by 99.875 % and proteins by 97 % (Prüfinstitut HygCen Austria, 06/2017). So the valuable instruments are preserved for longer time.
The insides of hollow body instruments can be connected directly to the Luer-Lock-connection at the handpiece or can be cleaned with the optionally available adapter set.
The high performance of the Elmasteam 8 med is due to the optimised piping system with larger cross sections, the intelligent pump control, the increased heating power (60% more) as well as the optimised heating position.
The intelligent control system of the Elmasteam 8 med calculates, by means of preset water hardness and the intensity and frequency of use, the proper time for decalcification. The user is led step by step through the decalcification process. Due to this integrated decalcification programme and the protection against dry running of the heating, the Elmasteam 8 med is highly reliable and fit for use for a long time.
By taking these measures and provided that the unit is being operated properly and in one-shift operation, the usual warranty can be extended to 3 years.
Elmasonic P
Elmasonic P
Elma, Elmasonic, Elmasonic P, ultrasonic cleaning, ultrasonic cleaning deviceElmasonic P – Ultrasonic Cleaning Device
The most professional way of using ultrasound.
Equipped with special functions, the Elmasonic P units are the ideal assistant for tasks and applications in analytical and medical laboratories or for intensive cleaning in industrial areas.
The product line comprises 6 machine sizes and multi-frequency technology with 37/80 kHz for different applications. The standard applications are performed at 37 kHz while finer cleaning processes with increased cleaning time run at the high frequency of 80 kHz. The high frequency is also hardly audible (even when the cover is open). Special functions such as Sweep, Pulse and Degas can be individually activated and complete the equipment.
Elmasonic Med
Ultrasonic cleaning
according to the latest laws.
Elmasonic Med* is the series of efficient and MDR compliant ultrasonic cleaning devices (3 – 90 l). Elmasonic Med devices are used for the pre-cleaning of instruments, protheses and implants in:
Medical centers and dental practices
Hospitals and CSSDs
Dental laboratories
Foot care salons
Tattoo und piercing studios
With 37 kHz ultrasonic frequency and 5 ultrasonic modes even stubborn contaminations can be removed.
degas – Quick degassing
eco – Quiet and engergy efficient operation as well as long device service life
sweep – More consistent ultrasonic cleaning
pulse – For the stubbornes of contamination
dynamic – Automatic change between pulse and sweep modes for even better cleaning results
S1 New Bone
Sticky Bone without Blood Collection!
-Product Description
S1 Dental
* Bovine Bonegraft
* Moldable & Customizing
* Sticky bone made easily with saline or blood
Bovine Bone Mineral
•Unable to mold
No space maintenance → Mouldable & Customizing
•No adhesion, No fixation → Customizied build up
•Blood collection to make sticky bone → Sticky bone made easily with saline or bloodn
S1 has similar structural characteristics with human bones
Due to its high porosity, S1 provides the most optimal environment for promoting osteoblast adhesion, blood vessel formation, and bone regeneration.
*Excellent adhesion and fixation
*Rigid Space Maintenance
*Excellent osteoconduction
*Easy to manipulate
*Various indications
High porosity
•Percentage of porosity is more than 70%
•High porosity allows rapid penetration of growth factors
Excellent shape maintenance
• Perfect shape maintenance against high pressure from outside compared to other bone
High wettability
• Porous structure makes blood circuldlion easily
BOSS
Bovine bonegraft manufactured by Sintering Technology of MedPark
Biocompatibility
* High blood permeability, similar pH to body fluids, rapid new bone formation without inflammatory reactions
* Sticky bone formation through PRF and CGF with independent process technology
Excellent Pore Structure
* Selection of proper size of graft materials for suitable environment for bone regeneration
* Increased micropores allows the migration of osteoblasts for increasing new bone formation
Easy Manipulation
* Enhanced hydrophilicity allows user to manipulate easily
* Applicable to various indication such as Socket Preservation, Sinus lift, Periodontal Defects and Ridge Augmentation
Perforations similar to human bones
High pore rate confirmed by the Porosimeter Test
Rough surface of microstructure makes osteoblast stick to the surface easily
(* Measure the size and pore rate of pores present on the sample surface by adsorbing mercury on the specimen)
Excellent bone formation & biocompatibility* Safe and stable bonegrafts without toxicity
* Cell survival rate was equivalent to that of the Product ‘B’
* Complete safety and stability verification as bonegraft
* Excellent biocompatibility, good differentiation of osteoblasts
| Type | Product | Porosity (%) |
| Boss | 70.20 | |
| Powder | Company ‘A’ | 48.74 |
| Company ‘B’ | 36.36 |
Colla
* Stable Decomposition Period
* Space Maintenance
* Biocompatibility
* Soft & Hard type
Aesorbable collagen membrane with Medparks crosslinking technology
Biocompatibility
* Using type I bovine collagen through standardized refining process
* Biocompatibility improvement of crosslinking technology ensures safety without inflammatory reactions
Stable Decomposition Period
* Ensured biodegradation period through application of CE certified quality management standard
* Colla can stand in the body for at least 4 months
Space Maintenance
* Excellent space maintenance in bone defect
* Reliable bone regeneration effect with perfect prevention of soft tissue penetration
Excellent initial shape retention
Collagenase Degradation Test
Colla Soft
Degradation time: Soft Type 6 hours
Shape: Soft Type Maintaining 60% of its shape up to 4 hours
Colla Hard
Degradation time: Hard Type 8 hours
Shape: Maintaining 80% of its shape up to 4 hours
Collagenase?
Enzymes that break down the peptide bonds in collagen
• Better initial shape maintenance than other membranes
In Vitro Test
Mechanical test (Tensile strength)
Improving a manipulability
and ensuring a stability for external stress
* Tensile strength (tearing resistance) in hydration is higher than other products
* Securing the initial osteoblast proliferation by its stability
Degradation test (Collagenase)
Improved resistance to decomposition as structural stability is achieved by enhanced interaction between collagen molecules
* High resistance to the enzyme action of macrophage
* Helping effective new bone formation by its shape maintenance and high resistance to enzyme decomposition
The kit offers a simple, easy work flow with orange colour coding specific to the Axiom® BL 2.8 implant
Low Speed Contra Angle 1 : 5
1:5 L Contra Angle with LED 10.000 – 200.000 rpm
Four holes spray
Highly enhance the cooling effect
Fiber optic
To provide high illumination in the patients’ mouth during treatment
Precise gear production
Swiss made equipment to guarantee the accuracy of gears
100% 1:5 increasing rate
Strong in cutting power and high efficiency
5 pcs German bearings
Fantastic performance in torque, vibration, noise, durability and little temperature increasing rate
E1
E1 Electric Micromotor with LED light 2.000 – 40.000 rpm
Storage Function
It can store speed choice for different dentists
Fiber Optic
To provide high illumimation in the patients mouth during treatment
6 pcs German Bearing
Fantastic performance in torque, vibration, noise, durability and little temperature increasing rate
Four Hole Spray
Highly enhance the cooling effect
4 Modes
1:1, 1:5, 16:1, 20:1
Precise Gear Production
Swiss made equipment to guarantee the accuracy of gear
100% 1:5 increasing rate
Strong in cutting power and high efficiency
Jinme 20 : 1
High torque implant handpiece with minimal vibration
E82
Committed to stress-free healing implant motor
Six advanced implanting experience
Swiss motor, quiet and light, not easy to fatigue
The ultra-quiet motor is imported from Switzerland;The noise is less than 40dB; E xtremely lightweight, comfortable to hold, and will not be tired after long-term operation; High CRI (color rendering index) LED light source, natural daylight, adjustable brightness (E80)
German bearings, large torque ultra-smooth and easy to operate
German bearings, radial runout ≤ 0.02mm, e xtremely stable operation; The unique gear structure design, can withstand a maximum torque output of 80N·cm; De tachable structure design for easy cleaning and disinfection.
Limit rotation function to prevent compression of bones and ensure stress-free healing
The unique limited-value gyration function prevents serious micro-damage of the bone int erface caused by excessive implant torque and affects bone tissue healing. Meanwhile, it prevents excessive compression of the bone when the implant is scr ewed into the bone and c auses bone resorption, and finally achieves stress-free healing of the implant.
Ultra low rotation speed for implant to reduce bone trauma
100 rpm，5N·cm-70N·cm;The ultra-low speed of the mo tor is 100 rpm, and the pr ecise torque control of 5N·cm-70N·cm reduces bone trauma. It brings more advantages to prepare cavity for implant system in the maxilla in pretty low speed.
Real time display, the parameters can be adjusted quickly and obviously
The interface is simple and intuitive, the tr eatment steps, speed, torque, cooling water adjustment, forward and reverse and other parameters can be displayed and adjusted in real time. The operation is simple and convenient; the appearance is simple and be autiful, and it is e asy to clean without dead spots.
Tepless variable speed, long-stroke foot pedal is more sensitive and comfortable.
Metal pedal, stepless speed change, long-stroke design, comfortable and sensitive speed c ontrol. Innovative button design for water source to control water out and stop in no delay. It definitely brings more convenience to avoid the step-by-step foot control to increase and decrease the water flow. IPX6 professional surgical-grade waterproof surface treatment to ensure safety and reliability.
E80
Committed to stress-free healing implant motor
Six advanced implanting experience
Swiss motor, quiet and light, not easy to fatigue
The ultra-quiet motor is imported from Switzerland;The noise is less than 40dB; E xtremely lightweight, comfortable to hold, and will not be tired after long-term operation; High CRI (color rendering index) LED light source, natural daylight, adjustable brightness (E80)
German bearings, large torque ultra-smooth and easy to operate
German bearings, radial runout ≤ 0.02mm, e xtremely stable operation; The unique gear structure design, can withstand a maximum torque output of 80N·cm; De tachable structure design for easy cleaning and disinfection.
Limit rotation function to prevent compression of bones and ensure stress-free healing
The unique limited-value gyration function prevents serious micro-damage of the bone int erface caused by excessive implant torque and affects bone tissue healing. Meanwhile, it prevents excessive compression of the bone when the implant is scr ewed into the bone and c auses bone resorption, and finally achieves stress-free healing of the implant.
Ultra low rotation speed for implant to reduce bone trauma
100 rpm，5N·cm-70N·cm;The ultra-low speed of the mo tor is 100 rpm, and the pr ecise torque control of 5N·cm-70N·cm reduces bone trauma. It brings more advantages to prepare cavity for implant system in the maxilla in pretty low speed.
Real time display, the parameters can be adjusted quickly and obviously
The interface is simple and intuitive, the tr eatment steps, speed, torque, cooling water adjustment, forward and reverse and other parameters can be displayed and adjusted in real time. The operation is simple and convenient; the appearance is simple and be autiful, and it is e asy to clean without dead spots.
Tepless variable speed, long-stroke foot pedal is more sensitive and comfortable.
Metal pedal, stepless speed change, long-stroke design, comfortable and sensitive speed c ontrol. Innovative button design for water source to control water out and stop in no delay. It definitely brings more convenience to avoid the step-by-step foot control to increase and decrease the water flow. IPX6 professional surgical-grade waterproof surface treatment to ensure safety and reliability.
Bio-C Temp
Bioceramic paste for intracanal dressing
Bio-C Sealer Ion+
Bioceramic root canal sealer ready to use
Internal resorption treatment.
Bio-C Repair
BIO-C® REPAIR is a ready-to-use bioceramic repair cement (putty).
The ready-to-use presentation in a screw-in syringe facilitates the removal of the product for application at the preparation site, simplifying this procedure with great time savings. In addition to its ease of use, it offers all the benefits of bioceramic formulation: induction of tissue regeneration through the release of Ca2+ ions resulting in the formation of mineralized tissue, bactericidal action due to its high pH, inhibition of bacterial infiltration by setting expansion and chemical adhesion to dentin. As a result, safety and high rates of success
in endodontic treatment are obtained.
DS01
Dental electric suction machines are used in oral treatment equipment. In the process of oral treatment, oral secretions and dirty blood are produced. The machine can provide a negative pressure suction power source for the dental treatment machine to suck away foreign objects with cells and contaminated liquid and debris. It can be used in hospitals or During treatment, dental office equipment is used as a suction power source when sucking spray, saliva, blood and small particles.
DS00 series straight shaft suction machine adopts durable design concept, superior product quality, ultra-small size and easy installation and maintenance.
| Model | DS01 |
|---|---|
| Voltage (V) | 110-240 |
| Frequency (Hz) | 50/60 |
| Power (kW) | 370 |
| Vacuum (kPa) | -12 |
| Max Air Flow | 450 L/min |
| Net Weight (Kg) | 22 |
| Dimension (mm) | 320*320*520 |
| Simultaneity Factor | For 1 chair |
EC 60 – Acidic Intense
EC 60 – Acidic Intense
Cleaning Chemistry, Cleaning Chemistry, Medicine, Dental Laboratory, medicine, dental laboratoryEC 60 – Acidic Intense is suitable for basic acidic cleaning of medical and dental laboratory instruments, prostheses and workpieces made of stainless steel, glass and plastics.
EC 60 – Acidic Intense is used for acid-based cleaning of medical and dental laboratory instruments, prostheses and tools made from stainless steel, glass or plastic. In combination with ultrasound EC 60 reliably removes contaminants and acid-soluble cements even in hard-to-reach areas, such as corners, edges and joints.
Rusted instruments should first be pre-cleaned separately with EC 60. EC 60 also thoroughly removes brown/gray deposits left by disinfectants and cleaning agents after autoclaving, tarnished areas or autoclaved blood spots. We recommend to thoroughly clean medical instruments with an acid-based product approximately every 6 months.
EC 55 – Instruments & Burrs Disinfection
EC 55 – Instruments & Burrs Disinfection
Cleaning Chemistry, Cleaning Chemistry, Medicine, Dental Laboratory, medicine, dental laboratoryEC 55 – Instruments & Burrs Disinfection is a concentrate for disinfectant cleaning in an immersion bath with and without ultrasound and is used for cleaning general and surgical medical instruments and specifically for rotating dental instruments and endoscopes.
EC 55 – Instruments & Burrs Disinfection is a concentrate for disinfectant cleaning in immersion baths with or without ultrasound. It is also used to clean both general and surgical medical instruments, in particular rotating dental instruments (drills, burs, root canal instruments) and endoscopes made from stainless steel, steel, carbide (incl. diamond-studded models), plastic or ceramic.
The EC 55 cleaning concentrate targets blood, proteins, saliva as well as tissue and bone residues.
EC 35 – Prostheses Daily
EC 35 – Prostheses Daily
Cleaning Chemistry, Cleaning Chemistry, Medicine, Dental Laboratory, medicine, dental laboratoryEC 35 – Prostheses Daily is used for daily, hygienic ultrasonic cleaning of dental prostheses made of metal, ceramic or plastic.
EC 35 – Prostheses Daily is used for the daily hygienic cleaning of dentures made from metal, ceramic or plastic.
This highly effective cleaner with active oxygen easily removes organic contaminants, deposits and food residues in an ultrasonic bath.
EC 25 – Alginates & Plasters
EC 25 – Alginates & Plasters
This ready-to-use detergent is ideal for the thorough ultrasonic cleaning of impression trays and dental instruments made from stainless steel, glass, ceramic or plastic.* It removes alginates and dental plaster without residue.
*Always test the compatibility of EC 25 – Alginates & Plasters with light metals (Al, Mg, Zn) and their alloys before use.
EC 10 – universal
EC 10 – universal
Elma, Elma Clean, Elma Dent Clean, Elma Med Clean, Elma EC 10, cleaning chemistry, cleaning chemistry, medicine, dental laboratory, medicine, dental laboratoryElma Dent & Med Clean EC 10 – Universal Cleaner
This universal detergent EC 10 – Universal is suitable for thorough ultrasonic cleaning of medical and dental instruments and laboratory equipment made of stainless steel, glass, plastics and ceramics. EC 10 – Universal removes blood, saliva, proteins and bone residues as well as grease, oil, grinding and polishing pastes.
Elmasteam 8 med
Elmasteam 8 med
Elmasteam, Elmasteam 8 med, MDR-compliant Steam Jet CleanerElmasteam 8 med – MDR-compliant Steam Jet Cleaner
Powerful cleaning in the CSSD
Certain instruments, such as burrs, drills and electro-surgical instruments, often do not become sufficiently clean in the standard washing and disinfecting unit. The Elmasteam 8 med* steam jet cleaner is the ideal tool to pre-clean such instruments and smoothly removes even tenacious contaminations like burnt-in tissue on electro-surgical forceps.** During cleaning, germs are reduced by 99.875 % and proteins by 97 % (Prüfinstitut HygCen Austria, 06/2017). So the valuable instruments are preserved for longer time.
The insides of hollow body instruments can be connected directly to the Luer-Lock-connection at the handpiece or can be cleaned with the optionally available adapter set.
The high performance of the Elmasteam 8 med is due to the optimised piping system with larger cross sections, the intelligent pump control, the increased heating power (60% more) as well as the optimised heating position.
The intelligent control system of the Elmasteam 8 med calculates, by means of preset water hardness and the intensity and frequency of use, the proper time for decalcification. The user is led step by step through the decalcification process. Due to this integrated decalcification programme and the protection against dry running of the heating, the Elmasteam 8 med is highly reliable and fit for use for a long time.
By taking these measures and provided that the unit is being operated properly and in one-shift operation, the usual warranty can be extended to 3 years.
Elmasonic P
Elmasonic P
Elma, Elmasonic, Elmasonic P, ultrasonic cleaning, ultrasonic cleaning deviceElmasonic P – Ultrasonic Cleaning Device
The most professional way of using ultrasound.
Equipped with special functions, the Elmasonic P units are the ideal assistant for tasks and applications in analytical and medical laboratories or for intensive cleaning in industrial areas.
The product line comprises 6 machine sizes and multi-frequency technology with 37/80 kHz for different applications. The standard applications are performed at 37 kHz while finer cleaning processes with increased cleaning time run at the high frequency of 80 kHz. The high frequency is also hardly audible (even when the cover is open). Special functions such as Sweep, Pulse and Degas can be individually activated and complete the equipment.
Elmasonic Med
Ultrasonic cleaning
according to the latest laws.
Elmasonic Med* is the series of efficient and MDR compliant ultrasonic cleaning devices (3 – 90 l). Elmasonic Med devices are used for the pre-cleaning of instruments, protheses and implants in:
Medical centers and dental practices
Hospitals and CSSDs
Dental laboratories
Foot care salons
Tattoo und piercing studios
With 37 kHz ultrasonic frequency and 5 ultrasonic modes even stubborn contaminations can be removed.
degas – Quick degassing
eco – Quiet and engergy efficient operation as well as long device service life
sweep – More consistent ultrasonic cleaning
pulse – For the stubbornes of contamination
dynamic – Automatic change between pulse and sweep modes for even better cleaning results
S1 New Bone
Sticky Bone without Blood Collection!
-Product Description
S1 Dental
* Bovine Bonegraft
* Moldable & Customizing
* Sticky bone made easily with saline or blood
Bovine Bone Mineral
•Unable to mold
No space maintenance → Mouldable & Customizing
•No adhesion, No fixation → Customizied build up
•Blood collection to make sticky bone → Sticky bone made easily with saline or bloodn
S1 has similar structural characteristics with human bones
Due to its high porosity, S1 provides the most optimal environment for promoting osteoblast adhesion, blood vessel formation, and bone regeneration.
*Excellent adhesion and fixation
*Rigid Space Maintenance
*Excellent osteoconduction
*Easy to manipulate
*Various indications
High porosity
•Percentage of porosity is more than 70%
•High porosity allows rapid penetration of growth factors
Excellent shape maintenance
• Perfect shape maintenance against high pressure from outside compared to other bone
High wettability
• Porous structure makes blood circuldlion easily
BOSS
Bovine bonegraft manufactured by Sintering Technology of MedPark
Biocompatibility
* High blood permeability, similar pH to body fluids, rapid new bone formation without inflammatory reactions
* Sticky bone formation through PRF and CGF with independent process technology
Excellent Pore Structure
* Selection of proper size of graft materials for suitable environment for bone regeneration
* Increased micropores allows the migration of osteoblasts for increasing new bone formation
Easy Manipulation
* Enhanced hydrophilicity allows user to manipulate easily
* Applicable to various indication such as Socket Preservation, Sinus lift, Periodontal Defects and Ridge Augmentation
Perforations similar to human bones
High pore rate confirmed by the Porosimeter Test
Rough surface of microstructure makes osteoblast stick to the surface easily
(* Measure the size and pore rate of pores present on the sample surface by adsorbing mercury on the specimen)
Excellent bone formation & biocompatibility* Safe and stable bonegrafts without toxicity
* Cell survival rate was equivalent to that of the Product ‘B’
* Complete safety and stability verification as bonegraft
* Excellent biocompatibility, good differentiation of osteoblasts
| Type | Product | Porosity (%) |
| Boss | 70.20 | |
| Powder | Company ‘A’ | 48.74 |
| Company ‘B’ | 36.36 |
Colla
* Stable Decomposition Period
* Space Maintenance
* Biocompatibility
* Soft & Hard type
Aesorbable collagen membrane with Medparks crosslinking technology
Biocompatibility
* Using type I bovine collagen through standardized refining process
* Biocompatibility improvement of crosslinking technology ensures safety without inflammatory reactions
Stable Decomposition Period
* Ensured biodegradation period through application of CE certified quality management standard
* Colla can stand in the body for at least 4 months
Space Maintenance
* Excellent space maintenance in bone defect
* Reliable bone regeneration effect with perfect prevention of soft tissue penetration
Excellent initial shape retention
Collagenase Degradation Test
Colla Soft
Degradation time: Soft Type 6 hours
Shape: Soft Type Maintaining 60% of its shape up to 4 hours
Colla Hard
Degradation time: Hard Type 8 hours
Shape: Maintaining 80% of its shape up to 4 hours
Collagenase?
Enzymes that break down the peptide bonds in collagen
• Better initial shape maintenance than other membranes
In Vitro Test
Mechanical test (Tensile strength)
Improving a manipulability
and ensuring a stability for external stress
* Tensile strength (tearing resistance) in hydration is higher than other products
* Securing the initial osteoblast proliferation by its stability
Degradation test (Collagenase)
Improved resistance to decomposition as structural stability is achieved by enhanced interaction between collagen molecules
* High resistance to the enzyme action of macrophage
* Helping effective new bone formation by its shape maintenance and high resistance to enzyme decomposition
The kit offers a simple, easy work flow with orange colour coding specific to the Axiom® BL 2.8 implant
Low Speed Contra Angle 1 : 5
1:5 L Contra Angle with LED 10.000 – 200.000 rpm
Four holes spray
Highly enhance the cooling effect
Fiber optic
To provide high illumination in the patients’ mouth during treatment
Precise gear production
Swiss made equipment to guarantee the accuracy of gears
100% 1:5 increasing rate
Strong in cutting power and high efficiency
5 pcs German bearings
Fantastic performance in torque, vibration, noise, durability and little temperature increasing rate
E1
E1 Electric Micromotor with LED light 2.000 – 40.000 rpm
Storage Function
It can store speed choice for different dentists
Fiber Optic
To provide high illumimation in the patients mouth during treatment
6 pcs German Bearing
Fantastic performance in torque, vibration, noise, durability and little temperature increasing rate
Four Hole Spray
Highly enhance the cooling effect
4 Modes
1:1, 1:5, 16:1, 20:1
Precise Gear Production
Swiss made equipment to guarantee the accuracy of gear
100% 1:5 increasing rate
Strong in cutting power and high efficiency
Jinme 20 : 1
High torque implant handpiece with minimal vibration
E82
Committed to stress-free healing implant motor
Six advanced implanting experience
Swiss motor, quiet and light, not easy to fatigue
The ultra-quiet motor is imported from Switzerland;The noise is less than 40dB; E xtremely lightweight, comfortable to hold, and will not be tired after long-term operation; High CRI (color rendering index) LED light source, natural daylight, adjustable brightness (E80)
German bearings, large torque ultra-smooth and easy to operate
German bearings, radial runout ≤ 0.02mm, e xtremely stable operation; The unique gear structure design, can withstand a maximum torque output of 80N·cm; De tachable structure design for easy cleaning and disinfection.
Limit rotation function to prevent compression of bones and ensure stress-free healing
The unique limited-value gyration function prevents serious micro-damage of the bone int erface caused by excessive implant torque and affects bone tissue healing. Meanwhile, it prevents excessive compression of the bone when the implant is scr ewed into the bone and c auses bone resorption, and finally achieves stress-free healing of the implant.
Ultra low rotation speed for implant to reduce bone trauma
100 rpm，5N·cm-70N·cm;The ultra-low speed of the mo tor is 100 rpm, and the pr ecise torque control of 5N·cm-70N·cm reduces bone trauma. It brings more advantages to prepare cavity for implant system in the maxilla in pretty low speed.
Real time display, the parameters can be adjusted quickly and obviously
The interface is simple and intuitive, the tr eatment steps, speed, torque, cooling water adjustment, forward and reverse and other parameters can be displayed and adjusted in real time. The operation is simple and convenient; the appearance is simple and be autiful, and it is e asy to clean without dead spots.
Tepless variable speed, long-stroke foot pedal is more sensitive and comfortable.
Metal pedal, stepless speed change, long-stroke design, comfortable and sensitive speed c ontrol. Innovative button design for water source to control water out and stop in no delay. It definitely brings more convenience to avoid the step-by-step foot control to increase and decrease the water flow. IPX6 professional surgical-grade waterproof surface treatment to ensure safety and reliability.
E80
Committed to stress-free healing implant motor
Six advanced implanting experience
Swiss motor, quiet and light, not easy to fatigue
The ultra-quiet motor is imported from Switzerland;The noise is less than 40dB; E xtremely lightweight, comfortable to hold, and will not be tired after long-term operation; High CRI (color rendering index) LED light source, natural daylight, adjustable brightness (E80)
German bearings, large torque ultra-smooth and easy to operate
German bearings, radial runout ≤ 0.02mm, e xtremely stable operation; The unique gear structure design, can withstand a maximum torque output of 80N·cm; De tachable structure design for easy cleaning and disinfection.
Limit rotation function to prevent compression of bones and ensure stress-free healing
The unique limited-value gyration function prevents serious micro-damage of the bone int erface caused by excessive implant torque and affects bone tissue healing. Meanwhile, it prevents excessive compression of the bone when the implant is scr ewed into the bone and c auses bone resorption, and finally achieves stress-free healing of the implant.
Ultra low rotation speed for implant to reduce bone trauma
100 rpm，5N·cm-70N·cm;The ultra-low speed of the mo tor is 100 rpm, and the pr ecise torque control of 5N·cm-70N·cm reduces bone trauma. It brings more advantages to prepare cavity for implant system in the maxilla in pretty low speed.
Real time display, the parameters can be adjusted quickly and obviously
The interface is simple and intuitive, the tr eatment steps, speed, torque, cooling water adjustment, forward and reverse and other parameters can be displayed and adjusted in real time. The operation is simple and convenient; the appearance is simple and be autiful, and it is e asy to clean without dead spots.
Tepless variable speed, long-stroke foot pedal is more sensitive and comfortable.
Metal pedal, stepless speed change, long-stroke design, comfortable and sensitive speed c ontrol. Innovative button design for water source to control water out and stop in no delay. It definitely brings more convenience to avoid the step-by-step foot control to increase and decrease the water flow. IPX6 professional surgical-grade waterproof surface treatment to ensure safety and reliability.
Bio-C Temp
Bioceramic paste for intracanal dressing
Bio-C Sealer Ion+
Bioceramic root canal sealer ready to use
Internal resorption treatment.
Bio-C Repair
BIO-C® REPAIR is a ready-to-use bioceramic repair cement (putty).
The ready-to-use presentation in a screw-in syringe facilitates the removal of the product for application at the preparation site, simplifying this procedure with great time savings. In addition to its ease of use, it offers all the benefits of bioceramic formulation: induction of tissue regeneration through the release of Ca2+ ions resulting in the formation of mineralized tissue, bactericidal action due to its high pH, inhibition of bacterial infiltration by setting expansion and chemical adhesion to dentin. As a result, safety and high rates of success
in endodontic treatment are obtained.
DS01
Dental electric suction machines are used in oral treatment equipment. In the process of oral treatment, oral secretions and dirty blood are produced. The machine can provide a negative pressure suction power source for the dental treatment machine to suck away foreign objects with cells and contaminated liquid and debris. It can be used in hospitals or During treatment, dental office equipment is used as a suction power source when sucking spray, saliva, blood and small particles.
DS00 series straight shaft suction machine adopts durable design concept, superior product quality, ultra-small size and easy installation and maintenance.
| Model | DS01 |
|---|---|
| Voltage (V) | 110-240 |
| Frequency (Hz) | 50/60 |
| Power (kW) | 370 |
| Vacuum (kPa) | -12 |
| Max Air Flow | 450 L/min |
| Net Weight (Kg) | 22 |
| Dimension (mm) | 320*320*520 |
| Simultaneity Factor | For 1 chair |
Bestellers
Laptops & Computers
EC 60 – Acidic Intense
EC 60 – Acidic Intense
Cleaning Chemistry, Cleaning Chemistry, Medicine, Dental Laboratory, medicine, dental laboratoryEC 60 – Acidic Intense is suitable for basic acidic cleaning of medical and dental laboratory instruments, prostheses and workpieces made of stainless steel, glass and plastics.
EC 60 – Acidic Intense is used for acid-based cleaning of medical and dental laboratory instruments, prostheses and tools made from stainless steel, glass or plastic. In combination with ultrasound EC 60 reliably removes contaminants and acid-soluble cements even in hard-to-reach areas, such as corners, edges and joints.
Rusted instruments should first be pre-cleaned separately with EC 60. EC 60 also thoroughly removes brown/gray deposits left by disinfectants and cleaning agents after autoclaving, tarnished areas or autoclaved blood spots. We recommend to thoroughly clean medical instruments with an acid-based product approximately every 6 months.
EC 55 – Instruments & Burrs Disinfection
EC 55 – Instruments & Burrs Disinfection
Cleaning Chemistry, Cleaning Chemistry, Medicine, Dental Laboratory, medicine, dental laboratoryEC 55 – Instruments & Burrs Disinfection is a concentrate for disinfectant cleaning in an immersion bath with and without ultrasound and is used for cleaning general and surgical medical instruments and specifically for rotating dental instruments and endoscopes.
EC 55 – Instruments & Burrs Disinfection is a concentrate for disinfectant cleaning in immersion baths with or without ultrasound. It is also used to clean both general and surgical medical instruments, in particular rotating dental instruments (drills, burs, root canal instruments) and endoscopes made from stainless steel, steel, carbide (incl. diamond-studded models), plastic or ceramic.
The EC 55 cleaning concentrate targets blood, proteins, saliva as well as tissue and bone residues.
EC 35 – Prostheses Daily
EC 35 – Prostheses Daily
Cleaning Chemistry, Cleaning Chemistry, Medicine, Dental Laboratory, medicine, dental laboratoryEC 35 – Prostheses Daily is used for daily, hygienic ultrasonic cleaning of dental prostheses made of metal, ceramic or plastic.
EC 35 – Prostheses Daily is used for the daily hygienic cleaning of dentures made from metal, ceramic or plastic.
This highly effective cleaner with active oxygen easily removes organic contaminants, deposits and food residues in an ultrasonic bath.
EC 25 – Alginates & Plasters
EC 25 – Alginates & Plasters
This ready-to-use detergent is ideal for the thorough ultrasonic cleaning of impression trays and dental instruments made from stainless steel, glass, ceramic or plastic.* It removes alginates and dental plaster without residue.
*Always test the compatibility of EC 25 – Alginates & Plasters with light metals (Al, Mg, Zn) and their alloys before use.
EC 10 – universal
EC 10 – universal
Elma, Elma Clean, Elma Dent Clean, Elma Med Clean, Elma EC 10, cleaning chemistry, cleaning chemistry, medicine, dental laboratory, medicine, dental laboratoryElma Dent & Med Clean EC 10 – Universal Cleaner
This universal detergent EC 10 – Universal is suitable for thorough ultrasonic cleaning of medical and dental instruments and laboratory equipment made of stainless steel, glass, plastics and ceramics. EC 10 – Universal removes blood, saliva, proteins and bone residues as well as grease, oil, grinding and polishing pastes.
Elmasteam 8 med
Elmasteam 8 med
Elmasteam, Elmasteam 8 med, MDR-compliant Steam Jet CleanerElmasteam 8 med – MDR-compliant Steam Jet Cleaner
Powerful cleaning in the CSSD
Certain instruments, such as burrs, drills and electro-surgical instruments, often do not become sufficiently clean in the standard washing and disinfecting unit. The Elmasteam 8 med* steam jet cleaner is the ideal tool to pre-clean such instruments and smoothly removes even tenacious contaminations like burnt-in tissue on electro-surgical forceps.** During cleaning, germs are reduced by 99.875 % and proteins by 97 % (Prüfinstitut HygCen Austria, 06/2017). So the valuable instruments are preserved for longer time.
The insides of hollow body instruments can be connected directly to the Luer-Lock-connection at the handpiece or can be cleaned with the optionally available adapter set.
The high performance of the Elmasteam 8 med is due to the optimised piping system with larger cross sections, the intelligent pump control, the increased heating power (60% more) as well as the optimised heating position.
The intelligent control system of the Elmasteam 8 med calculates, by means of preset water hardness and the intensity and frequency of use, the proper time for decalcification. The user is led step by step through the decalcification process. Due to this integrated decalcification programme and the protection against dry running of the heating, the Elmasteam 8 med is highly reliable and fit for use for a long time.
By taking these measures and provided that the unit is being operated properly and in one-shift operation, the usual warranty can be extended to 3 years.
Elmasonic P
Elmasonic P
Elma, Elmasonic, Elmasonic P, ultrasonic cleaning, ultrasonic cleaning deviceElmasonic P – Ultrasonic Cleaning Device
The most professional way of using ultrasound.
Equipped with special functions, the Elmasonic P units are the ideal assistant for tasks and applications in analytical and medical laboratories or for intensive cleaning in industrial areas.
The product line comprises 6 machine sizes and multi-frequency technology with 37/80 kHz for different applications. The standard applications are performed at 37 kHz while finer cleaning processes with increased cleaning time run at the high frequency of 80 kHz. The high frequency is also hardly audible (even when the cover is open). Special functions such as Sweep, Pulse and Degas can be individually activated and complete the equipment.
Elmasonic Med
Ultrasonic cleaning
according to the latest laws.
Elmasonic Med* is the series of efficient and MDR compliant ultrasonic cleaning devices (3 – 90 l). Elmasonic Med devices are used for the pre-cleaning of instruments, protheses and implants in:
Medical centers and dental practices
Hospitals and CSSDs
Dental laboratories
Foot care salons
Tattoo und piercing studios
With 37 kHz ultrasonic frequency and 5 ultrasonic modes even stubborn contaminations can be removed.
degas – Quick degassing
eco – Quiet and engergy efficient operation as well as long device service life
sweep – More consistent ultrasonic cleaning
pulse – For the stubbornes of contamination
dynamic – Automatic change between pulse and sweep modes for even better cleaning results
S1 New Bone
Sticky Bone without Blood Collection!
-Product Description
S1 Dental
* Bovine Bonegraft
* Moldable & Customizing
* Sticky bone made easily with saline or blood
Bovine Bone Mineral
•Unable to mold
No space maintenance → Mouldable & Customizing
•No adhesion, No fixation → Customizied build up
•Blood collection to make sticky bone → Sticky bone made easily with saline or bloodn
S1 has similar structural characteristics with human bones
Due to its high porosity, S1 provides the most optimal environment for promoting osteoblast adhesion, blood vessel formation, and bone regeneration.
*Excellent adhesion and fixation
*Rigid Space Maintenance
*Excellent osteoconduction
*Easy to manipulate
*Various indications
High porosity
•Percentage of porosity is more than 70%
•High porosity allows rapid penetration of growth factors
Excellent shape maintenance
• Perfect shape maintenance against high pressure from outside compared to other bone
High wettability
• Porous structure makes blood circuldlion easily
BOSS
Bovine bonegraft manufactured by Sintering Technology of MedPark
Biocompatibility
* High blood permeability, similar pH to body fluids, rapid new bone formation without inflammatory reactions
* Sticky bone formation through PRF and CGF with independent process technology
Excellent Pore Structure
* Selection of proper size of graft materials for suitable environment for bone regeneration
* Increased micropores allows the migration of osteoblasts for increasing new bone formation
Easy Manipulation
* Enhanced hydrophilicity allows user to manipulate easily
* Applicable to various indication such as Socket Preservation, Sinus lift, Periodontal Defects and Ridge Augmentation
Perforations similar to human bones
High pore rate confirmed by the Porosimeter Test
Rough surface of microstructure makes osteoblast stick to the surface easily
(* Measure the size and pore rate of pores present on the sample surface by adsorbing mercury on the specimen)
Excellent bone formation & biocompatibility* Safe and stable bonegrafts without toxicity
* Cell survival rate was equivalent to that of the Product ‘B’
* Complete safety and stability verification as bonegraft
* Excellent biocompatibility, good differentiation of osteoblasts
| Type | Product | Porosity (%) |
| Boss | 70.20 | |
| Powder | Company ‘A’ | 48.74 |
| Company ‘B’ | 36.36 |
Colla
* Stable Decomposition Period
* Space Maintenance
* Biocompatibility
* Soft & Hard type
Aesorbable collagen membrane with Medparks crosslinking technology
Biocompatibility
* Using type I bovine collagen through standardized refining process
* Biocompatibility improvement of crosslinking technology ensures safety without inflammatory reactions
Stable Decomposition Period
* Ensured biodegradation period through application of CE certified quality management standard
* Colla can stand in the body for at least 4 months
Space Maintenance
* Excellent space maintenance in bone defect
* Reliable bone regeneration effect with perfect prevention of soft tissue penetration
Excellent initial shape retention
Collagenase Degradation Test
Colla Soft
Degradation time: Soft Type 6 hours
Shape: Soft Type Maintaining 60% of its shape up to 4 hours
Colla Hard
Degradation time: Hard Type 8 hours
Shape: Maintaining 80% of its shape up to 4 hours
Collagenase?
Enzymes that break down the peptide bonds in collagen
• Better initial shape maintenance than other membranes
In Vitro Test
Mechanical test (Tensile strength)
Improving a manipulability
and ensuring a stability for external stress
* Tensile strength (tearing resistance) in hydration is higher than other products
* Securing the initial osteoblast proliferation by its stability
Degradation test (Collagenase)
Improved resistance to decomposition as structural stability is achieved by enhanced interaction between collagen molecules
* High resistance to the enzyme action of macrophage
* Helping effective new bone formation by its shape maintenance and high resistance to enzyme decomposition
The kit offers a simple, easy work flow with orange colour coding specific to the Axiom® BL 2.8 implant
Low Speed Contra Angle 1 : 5
1:5 L Contra Angle with LED 10.000 – 200.000 rpm
Four holes spray
Highly enhance the cooling effect
Fiber optic
To provide high illumination in the patients’ mouth during treatment
Precise gear production
Swiss made equipment to guarantee the accuracy of gears
100% 1:5 increasing rate
Strong in cutting power and high efficiency
5 pcs German bearings
Fantastic performance in torque, vibration, noise, durability and little temperature increasing rate
E1
E1 Electric Micromotor with LED light 2.000 – 40.000 rpm
Storage Function
It can store speed choice for different dentists
Fiber Optic
To provide high illumimation in the patients mouth during treatment
6 pcs German Bearing
Fantastic performance in torque, vibration, noise, durability and little temperature increasing rate
Four Hole Spray
Highly enhance the cooling effect
4 Modes
1:1, 1:5, 16:1, 20:1
Precise Gear Production
Swiss made equipment to guarantee the accuracy of gear
100% 1:5 increasing rate
Strong in cutting power and high efficiency
Jinme 20 : 1
High torque implant handpiece with minimal vibration
E82
Committed to stress-free healing implant motor
Six advanced implanting experience
Swiss motor, quiet and light, not easy to fatigue
The ultra-quiet motor is imported from Switzerland;The noise is less than 40dB; E xtremely lightweight, comfortable to hold, and will not be tired after long-term operation; High CRI (color rendering index) LED light source, natural daylight, adjustable brightness (E80)
German bearings, large torque ultra-smooth and easy to operate
German bearings, radial runout ≤ 0.02mm, e xtremely stable operation; The unique gear structure design, can withstand a maximum torque output of 80N·cm; De tachable structure design for easy cleaning and disinfection.
Limit rotation function to prevent compression of bones and ensure stress-free healing
The unique limited-value gyration function prevents serious micro-damage of the bone int erface caused by excessive implant torque and affects bone tissue healing. Meanwhile, it prevents excessive compression of the bone when the implant is scr ewed into the bone and c auses bone resorption, and finally achieves stress-free healing of the implant.
Ultra low rotation speed for implant to reduce bone trauma
100 rpm，5N·cm-70N·cm;The ultra-low speed of the mo tor is 100 rpm, and the pr ecise torque control of 5N·cm-70N·cm reduces bone trauma. It brings more advantages to prepare cavity for implant system in the maxilla in pretty low speed.
Real time display, the parameters can be adjusted quickly and obviously
The interface is simple and intuitive, the tr eatment steps, speed, torque, cooling water adjustment, forward and reverse and other parameters can be displayed and adjusted in real time. The operation is simple and convenient; the appearance is simple and be autiful, and it is e asy to clean without dead spots.
Tepless variable speed, long-stroke foot pedal is more sensitive and comfortable.
Metal pedal, stepless speed change, long-stroke design, comfortable and sensitive speed c ontrol. Innovative button design for water source to control water out and stop in no delay. It definitely brings more convenience to avoid the step-by-step foot control to increase and decrease the water flow. IPX6 professional surgical-grade waterproof surface treatment to ensure safety and reliability.
E80
Committed to stress-free healing implant motor
Six advanced implanting experience
Swiss motor, quiet and light, not easy to fatigue
The ultra-quiet motor is imported from Switzerland;The noise is less than 40dB; E xtremely lightweight, comfortable to hold, and will not be tired after long-term operation; High CRI (color rendering index) LED light source, natural daylight, adjustable brightness (E80)
German bearings, large torque ultra-smooth and easy to operate
German bearings, radial runout ≤ 0.02mm, e xtremely stable operation; The unique gear structure design, can withstand a maximum torque output of 80N·cm; De tachable structure design for easy cleaning and disinfection.
Limit rotation function to prevent compression of bones and ensure stress-free healing
The unique limited-value gyration function prevents serious micro-damage of the bone int erface caused by excessive implant torque and affects bone tissue healing. Meanwhile, it prevents excessive compression of the bone when the implant is scr ewed into the bone and c auses bone resorption, and finally achieves stress-free healing of the implant.
Ultra low rotation speed for implant to reduce bone trauma
100 rpm，5N·cm-70N·cm;The ultra-low speed of the mo tor is 100 rpm, and the pr ecise torque control of 5N·cm-70N·cm reduces bone trauma. It brings more advantages to prepare cavity for implant system in the maxilla in pretty low speed.
Real time display, the parameters can be adjusted quickly and obviously
The interface is simple and intuitive, the tr eatment steps, speed, torque, cooling water adjustment, forward and reverse and other parameters can be displayed and adjusted in real time. The operation is simple and convenient; the appearance is simple and be autiful, and it is e asy to clean without dead spots.
Tepless variable speed, long-stroke foot pedal is more sensitive and comfortable.
Metal pedal, stepless speed change, long-stroke design, comfortable and sensitive speed c ontrol. Innovative button design for water source to control water out and stop in no delay. It definitely brings more convenience to avoid the step-by-step foot control to increase and decrease the water flow. IPX6 professional surgical-grade waterproof surface treatment to ensure safety and reliability.
Bio-C Temp
Bioceramic paste for intracanal dressing
Bio-C Sealer Ion+
Bioceramic root canal sealer ready to use
Internal resorption treatment.
Bio-C Repair
BIO-C® REPAIR is a ready-to-use bioceramic repair cement (putty).
The ready-to-use presentation in a screw-in syringe facilitates the removal of the product for application at the preparation site, simplifying this procedure with great time savings. In addition to its ease of use, it offers all the benefits of bioceramic formulation: induction of tissue regeneration through the release of Ca2+ ions resulting in the formation of mineralized tissue, bactericidal action due to its high pH, inhibition of bacterial infiltration by setting expansion and chemical adhesion to dentin. As a result, safety and high rates of success
in endodontic treatment are obtained.
DS01
Dental electric suction machines are used in oral treatment equipment. In the process of oral treatment, oral secretions and dirty blood are produced. The machine can provide a negative pressure suction power source for the dental treatment machine to suck away foreign objects with cells and contaminated liquid and debris. It can be used in hospitals or During treatment, dental office equipment is used as a suction power source when sucking spray, saliva, blood and small particles.
DS00 series straight shaft suction machine adopts durable design concept, superior product quality, ultra-small size and easy installation and maintenance.
| Model | DS01 |
|---|---|
| Voltage (V) | 110-240 |
| Frequency (Hz) | 50/60 |
| Power (kW) | 370 |
| Vacuum (kPa) | -12 |
| Max Air Flow | 450 L/min |
| Net Weight (Kg) | 22 |
| Dimension (mm) | 320*320*520 |
| Simultaneity Factor | For 1 chair |
Smartphones
EC 60 – Acidic Intense
EC 60 – Acidic Intense
Cleaning Chemistry, Cleaning Chemistry, Medicine, Dental Laboratory, medicine, dental laboratoryEC 60 – Acidic Intense is suitable for basic acidic cleaning of medical and dental laboratory instruments, prostheses and workpieces made of stainless steel, glass and plastics.
EC 60 – Acidic Intense is used for acid-based cleaning of medical and dental laboratory instruments, prostheses and tools made from stainless steel, glass or plastic. In combination with ultrasound EC 60 reliably removes contaminants and acid-soluble cements even in hard-to-reach areas, such as corners, edges and joints.
Rusted instruments should first be pre-cleaned separately with EC 60. EC 60 also thoroughly removes brown/gray deposits left by disinfectants and cleaning agents after autoclaving, tarnished areas or autoclaved blood spots. We recommend to thoroughly clean medical instruments with an acid-based product approximately every 6 months.
EC 55 – Instruments & Burrs Disinfection
EC 55 – Instruments & Burrs Disinfection
Cleaning Chemistry, Cleaning Chemistry, Medicine, Dental Laboratory, medicine, dental laboratoryEC 55 – Instruments & Burrs Disinfection is a concentrate for disinfectant cleaning in an immersion bath with and without ultrasound and is used for cleaning general and surgical medical instruments and specifically for rotating dental instruments and endoscopes.
EC 55 – Instruments & Burrs Disinfection is a concentrate for disinfectant cleaning in immersion baths with or without ultrasound. It is also used to clean both general and surgical medical instruments, in particular rotating dental instruments (drills, burs, root canal instruments) and endoscopes made from stainless steel, steel, carbide (incl. diamond-studded models), plastic or ceramic.
The EC 55 cleaning concentrate targets blood, proteins, saliva as well as tissue and bone residues.
EC 35 – Prostheses Daily
EC 35 – Prostheses Daily
Cleaning Chemistry, Cleaning Chemistry, Medicine, Dental Laboratory, medicine, dental laboratoryEC 35 – Prostheses Daily is used for daily, hygienic ultrasonic cleaning of dental prostheses made of metal, ceramic or plastic.
EC 35 – Prostheses Daily is used for the daily hygienic cleaning of dentures made from metal, ceramic or plastic.
This highly effective cleaner with active oxygen easily removes organic contaminants, deposits and food residues in an ultrasonic bath.
EC 25 – Alginates & Plasters
EC 25 – Alginates & Plasters
This ready-to-use detergent is ideal for the thorough ultrasonic cleaning of impression trays and dental instruments made from stainless steel, glass, ceramic or plastic.* It removes alginates and dental plaster without residue.
*Always test the compatibility of EC 25 – Alginates & Plasters with light metals (Al, Mg, Zn) and their alloys before use.
EC 10 – universal
EC 10 – universal
Elma, Elma Clean, Elma Dent Clean, Elma Med Clean, Elma EC 10, cleaning chemistry, cleaning chemistry, medicine, dental laboratory, medicine, dental laboratoryElma Dent & Med Clean EC 10 – Universal Cleaner
This universal detergent EC 10 – Universal is suitable for thorough ultrasonic cleaning of medical and dental instruments and laboratory equipment made of stainless steel, glass, plastics and ceramics. EC 10 – Universal removes blood, saliva, proteins and bone residues as well as grease, oil, grinding and polishing pastes.
Elmasteam 8 med
Elmasteam 8 med
Elmasteam, Elmasteam 8 med, MDR-compliant Steam Jet CleanerElmasteam 8 med – MDR-compliant Steam Jet Cleaner
Powerful cleaning in the CSSD
Certain instruments, such as burrs, drills and electro-surgical instruments, often do not become sufficiently clean in the standard washing and disinfecting unit. The Elmasteam 8 med* steam jet cleaner is the ideal tool to pre-clean such instruments and smoothly removes even tenacious contaminations like burnt-in tissue on electro-surgical forceps.** During cleaning, germs are reduced by 99.875 % and proteins by 97 % (Prüfinstitut HygCen Austria, 06/2017). So the valuable instruments are preserved for longer time.
The insides of hollow body instruments can be connected directly to the Luer-Lock-connection at the handpiece or can be cleaned with the optionally available adapter set.
The high performance of the Elmasteam 8 med is due to the optimised piping system with larger cross sections, the intelligent pump control, the increased heating power (60% more) as well as the optimised heating position.
The intelligent control system of the Elmasteam 8 med calculates, by means of preset water hardness and the intensity and frequency of use, the proper time for decalcification. The user is led step by step through the decalcification process. Due to this integrated decalcification programme and the protection against dry running of the heating, the Elmasteam 8 med is highly reliable and fit for use for a long time.
By taking these measures and provided that the unit is being operated properly and in one-shift operation, the usual warranty can be extended to 3 years.
Elmasonic P
Elmasonic P
Elma, Elmasonic, Elmasonic P, ultrasonic cleaning, ultrasonic cleaning deviceElmasonic P – Ultrasonic Cleaning Device
The most professional way of using ultrasound.
Equipped with special functions, the Elmasonic P units are the ideal assistant for tasks and applications in analytical and medical laboratories or for intensive cleaning in industrial areas.
The product line comprises 6 machine sizes and multi-frequency technology with 37/80 kHz for different applications. The standard applications are performed at 37 kHz while finer cleaning processes with increased cleaning time run at the high frequency of 80 kHz. The high frequency is also hardly audible (even when the cover is open). Special functions such as Sweep, Pulse and Degas can be individually activated and complete the equipment.
Elmasonic Med
Ultrasonic cleaning
according to the latest laws.
Elmasonic Med* is the series of efficient and MDR compliant ultrasonic cleaning devices (3 – 90 l). Elmasonic Med devices are used for the pre-cleaning of instruments, protheses and implants in:
Medical centers and dental practices
Hospitals and CSSDs
Dental laboratories
Foot care salons
Tattoo und piercing studios
With 37 kHz ultrasonic frequency and 5 ultrasonic modes even stubborn contaminations can be removed.
degas – Quick degassing
eco – Quiet and engergy efficient operation as well as long device service life
sweep – More consistent ultrasonic cleaning
pulse – For the stubbornes of contamination
dynamic – Automatic change between pulse and sweep modes for even better cleaning results
S1 New Bone
Sticky Bone without Blood Collection!
-Product Description
S1 Dental
* Bovine Bonegraft
* Moldable & Customizing
* Sticky bone made easily with saline or blood
Bovine Bone Mineral
•Unable to mold
No space maintenance → Mouldable & Customizing
•No adhesion, No fixation → Customizied build up
•Blood collection to make sticky bone → Sticky bone made easily with saline or bloodn
S1 has similar structural characteristics with human bones
Due to its high porosity, S1 provides the most optimal environment for promoting osteoblast adhesion, blood vessel formation, and bone regeneration.
*Excellent adhesion and fixation
*Rigid Space Maintenance
*Excellent osteoconduction
*Easy to manipulate
*Various indications
High porosity
•Percentage of porosity is more than 70%
•High porosity allows rapid penetration of growth factors
Excellent shape maintenance
• Perfect shape maintenance against high pressure from outside compared to other bone
High wettability
• Porous structure makes blood circuldlion easily
BOSS
Bovine bonegraft manufactured by Sintering Technology of MedPark
Biocompatibility
* High blood permeability, similar pH to body fluids, rapid new bone formation without inflammatory reactions
* Sticky bone formation through PRF and CGF with independent process technology
Excellent Pore Structure
* Selection of proper size of graft materials for suitable environment for bone regeneration
* Increased micropores allows the migration of osteoblasts for increasing new bone formation
Easy Manipulation
* Enhanced hydrophilicity allows user to manipulate easily
* Applicable to various indication such as Socket Preservation, Sinus lift, Periodontal Defects and Ridge Augmentation
Perforations similar to human bones
High pore rate confirmed by the Porosimeter Test
Rough surface of microstructure makes osteoblast stick to the surface easily
(* Measure the size and pore rate of pores present on the sample surface by adsorbing mercury on the specimen)
Excellent bone formation & biocompatibility* Safe and stable bonegrafts without toxicity
* Cell survival rate was equivalent to that of the Product ‘B’
* Complete safety and stability verification as bonegraft
* Excellent biocompatibility, good differentiation of osteoblasts
| Type | Product | Porosity (%) |
| Boss | 70.20 | |
| Powder | Company ‘A’ | 48.74 |
| Company ‘B’ | 36.36 |
Colla
* Stable Decomposition Period
* Space Maintenance
* Biocompatibility
* Soft & Hard type
Aesorbable collagen membrane with Medparks crosslinking technology
Biocompatibility
* Using type I bovine collagen through standardized refining process
* Biocompatibility improvement of crosslinking technology ensures safety without inflammatory reactions
Stable Decomposition Period
* Ensured biodegradation period through application of CE certified quality management standard
* Colla can stand in the body for at least 4 months
Space Maintenance
* Excellent space maintenance in bone defect
* Reliable bone regeneration effect with perfect prevention of soft tissue penetration
Excellent initial shape retention
Collagenase Degradation Test
Colla Soft
Degradation time: Soft Type 6 hours
Shape: Soft Type Maintaining 60% of its shape up to 4 hours
Colla Hard
Degradation time: Hard Type 8 hours
Shape: Maintaining 80% of its shape up to 4 hours
Collagenase?
Enzymes that break down the peptide bonds in collagen
• Better initial shape maintenance than other membranes
In Vitro Test
Mechanical test (Tensile strength)
Improving a manipulability
and ensuring a stability for external stress
* Tensile strength (tearing resistance) in hydration is higher than other products
* Securing the initial osteoblast proliferation by its stability
Degradation test (Collagenase)
Improved resistance to decomposition as structural stability is achieved by enhanced interaction between collagen molecules
* High resistance to the enzyme action of macrophage
* Helping effective new bone formation by its shape maintenance and high resistance to enzyme decomposition
The kit offers a simple, easy work flow with orange colour coding specific to the Axiom® BL 2.8 implant
Low Speed Contra Angle 1 : 5
1:5 L Contra Angle with LED 10.000 – 200.000 rpm
Four holes spray
Highly enhance the cooling effect
Fiber optic
To provide high illumination in the patients’ mouth during treatment
Precise gear production
Swiss made equipment to guarantee the accuracy of gears
100% 1:5 increasing rate
Strong in cutting power and high efficiency
5 pcs German bearings
Fantastic performance in torque, vibration, noise, durability and little temperature increasing rate
E1
E1 Electric Micromotor with LED light 2.000 – 40.000 rpm
Storage Function
It can store speed choice for different dentists
Fiber Optic
To provide high illumimation in the patients mouth during treatment
6 pcs German Bearing
Fantastic performance in torque, vibration, noise, durability and little temperature increasing rate
Four Hole Spray
Highly enhance the cooling effect
4 Modes
1:1, 1:5, 16:1, 20:1
Precise Gear Production
Swiss made equipment to guarantee the accuracy of gear
100% 1:5 increasing rate
Strong in cutting power and high efficiency
Jinme 20 : 1
High torque implant handpiece with minimal vibration
E82
Committed to stress-free healing implant motor
Six advanced implanting experience
Swiss motor, quiet and light, not easy to fatigue
The ultra-quiet motor is imported from Switzerland;The noise is less than 40dB; E xtremely lightweight, comfortable to hold, and will not be tired after long-term operation; High CRI (color rendering index) LED light source, natural daylight, adjustable brightness (E80)
German bearings, large torque ultra-smooth and easy to operate
German bearings, radial runout ≤ 0.02mm, e xtremely stable operation; The unique gear structure design, can withstand a maximum torque output of 80N·cm; De tachable structure design for easy cleaning and disinfection.
Limit rotation function to prevent compression of bones and ensure stress-free healing
The unique limited-value gyration function prevents serious micro-damage of the bone int erface caused by excessive implant torque and affects bone tissue healing. Meanwhile, it prevents excessive compression of the bone when the implant is scr ewed into the bone and c auses bone resorption, and finally achieves stress-free healing of the implant.
Ultra low rotation speed for implant to reduce bone trauma
100 rpm，5N·cm-70N·cm;The ultra-low speed of the mo tor is 100 rpm, and the pr ecise torque control of 5N·cm-70N·cm reduces bone trauma. It brings more advantages to prepare cavity for implant system in the maxilla in pretty low speed.
Real time display, the parameters can be adjusted quickly and obviously
The interface is simple and intuitive, the tr eatment steps, speed, torque, cooling water adjustment, forward and reverse and other parameters can be displayed and adjusted in real time. The operation is simple and convenient; the appearance is simple and be autiful, and it is e asy to clean without dead spots.
Tepless variable speed, long-stroke foot pedal is more sensitive and comfortable.
Metal pedal, stepless speed change, long-stroke design, comfortable and sensitive speed c ontrol. Innovative button design for water source to control water out and stop in no delay. It definitely brings more convenience to avoid the step-by-step foot control to increase and decrease the water flow. IPX6 professional surgical-grade waterproof surface treatment to ensure safety and reliability.
E80
Committed to stress-free healing implant motor
Six advanced implanting experience
Swiss motor, quiet and light, not easy to fatigue
The ultra-quiet motor is imported from Switzerland;The noise is less than 40dB; E xtremely lightweight, comfortable to hold, and will not be tired after long-term operation; High CRI (color rendering index) LED light source, natural daylight, adjustable brightness (E80)
German bearings, large torque ultra-smooth and easy to operate
German bearings, radial runout ≤ 0.02mm, e xtremely stable operation; The unique gear structure design, can withstand a maximum torque output of 80N·cm; De tachable structure design for easy cleaning and disinfection.
Limit rotation function to prevent compression of bones and ensure stress-free healing
The unique limited-value gyration function prevents serious micro-damage of the bone int erface caused by excessive implant torque and affects bone tissue healing. Meanwhile, it prevents excessive compression of the bone when the implant is scr ewed into the bone and c auses bone resorption, and finally achieves stress-free healing of the implant.
Ultra low rotation speed for implant to reduce bone trauma
100 rpm，5N·cm-70N·cm;The ultra-low speed of the mo tor is 100 rpm, and the pr ecise torque control of 5N·cm-70N·cm reduces bone trauma. It brings more advantages to prepare cavity for implant system in the maxilla in pretty low speed.
Real time display, the parameters can be adjusted quickly and obviously
The interface is simple and intuitive, the tr eatment steps, speed, torque, cooling water adjustment, forward and reverse and other parameters can be displayed and adjusted in real time. The operation is simple and convenient; the appearance is simple and be autiful, and it is e asy to clean without dead spots.
Tepless variable speed, long-stroke foot pedal is more sensitive and comfortable.
Metal pedal, stepless speed change, long-stroke design, comfortable and sensitive speed c ontrol. Innovative button design for water source to control water out and stop in no delay. It definitely brings more convenience to avoid the step-by-step foot control to increase and decrease the water flow. IPX6 professional surgical-grade waterproof surface treatment to ensure safety and reliability.
Recently Viewed
EC 60 – Acidic Intense
EC 60 – Acidic Intense
Cleaning Chemistry, Cleaning Chemistry, Medicine, Dental Laboratory, medicine, dental laboratoryEC 60 – Acidic Intense is suitable for basic acidic cleaning of medical and dental laboratory instruments, prostheses and workpieces made of stainless steel, glass and plastics.
EC 60 – Acidic Intense is used for acid-based cleaning of medical and dental laboratory instruments, prostheses and tools made from stainless steel, glass or plastic. In combination with ultrasound EC 60 reliably removes contaminants and acid-soluble cements even in hard-to-reach areas, such as corners, edges and joints.
Rusted instruments should first be pre-cleaned separately with EC 60. EC 60 also thoroughly removes brown/gray deposits left by disinfectants and cleaning agents after autoclaving, tarnished areas or autoclaved blood spots. We recommend to thoroughly clean medical instruments with an acid-based product approximately every 6 months.
EC 55 – Instruments & Burrs Disinfection
EC 55 – Instruments & Burrs Disinfection
Cleaning Chemistry, Cleaning Chemistry, Medicine, Dental Laboratory, medicine, dental laboratoryEC 55 – Instruments & Burrs Disinfection is a concentrate for disinfectant cleaning in an immersion bath with and without ultrasound and is used for cleaning general and surgical medical instruments and specifically for rotating dental instruments and endoscopes.
EC 55 – Instruments & Burrs Disinfection is a concentrate for disinfectant cleaning in immersion baths with or without ultrasound. It is also used to clean both general and surgical medical instruments, in particular rotating dental instruments (drills, burs, root canal instruments) and endoscopes made from stainless steel, steel, carbide (incl. diamond-studded models), plastic or ceramic.
The EC 55 cleaning concentrate targets blood, proteins, saliva as well as tissue and bone residues.
EC 35 – Prostheses Daily
EC 35 – Prostheses Daily
Cleaning Chemistry, Cleaning Chemistry, Medicine, Dental Laboratory, medicine, dental laboratoryEC 35 – Prostheses Daily is used for daily, hygienic ultrasonic cleaning of dental prostheses made of metal, ceramic or plastic.
EC 35 – Prostheses Daily is used for the daily hygienic cleaning of dentures made from metal, ceramic or plastic.
This highly effective cleaner with active oxygen easily removes organic contaminants, deposits and food residues in an ultrasonic bath.
EC 25 – Alginates & Plasters
EC 25 – Alginates & Plasters
This ready-to-use detergent is ideal for the thorough ultrasonic cleaning of impression trays and dental instruments made from stainless steel, glass, ceramic or plastic.* It removes alginates and dental plaster without residue.
*Always test the compatibility of EC 25 – Alginates & Plasters with light metals (Al, Mg, Zn) and their alloys before use.
EC 10 – universal
EC 10 – universal
Elma, Elma Clean, Elma Dent Clean, Elma Med Clean, Elma EC 10, cleaning chemistry, cleaning chemistry, medicine, dental laboratory, medicine, dental laboratoryElma Dent & Med Clean EC 10 – Universal Cleaner
This universal detergent EC 10 – Universal is suitable for thorough ultrasonic cleaning of medical and dental instruments and laboratory equipment made of stainless steel, glass, plastics and ceramics. EC 10 – Universal removes blood, saliva, proteins and bone residues as well as grease, oil, grinding and polishing pastes.
Elmasteam 8 med
Elmasteam 8 med
Elmasteam, Elmasteam 8 med, MDR-compliant Steam Jet CleanerElmasteam 8 med – MDR-compliant Steam Jet Cleaner
Powerful cleaning in the CSSD
Certain instruments, such as burrs, drills and electro-surgical instruments, often do not become sufficiently clean in the standard washing and disinfecting unit. The Elmasteam 8 med* steam jet cleaner is the ideal tool to pre-clean such instruments and smoothly removes even tenacious contaminations like burnt-in tissue on electro-surgical forceps.** During cleaning, germs are reduced by 99.875 % and proteins by 97 % (Prüfinstitut HygCen Austria, 06/2017). So the valuable instruments are preserved for longer time.
The insides of hollow body instruments can be connected directly to the Luer-Lock-connection at the handpiece or can be cleaned with the optionally available adapter set.
The high performance of the Elmasteam 8 med is due to the optimised piping system with larger cross sections, the intelligent pump control, the increased heating power (60% more) as well as the optimised heating position.
The intelligent control system of the Elmasteam 8 med calculates, by means of preset water hardness and the intensity and frequency of use, the proper time for decalcification. The user is led step by step through the decalcification process. Due to this integrated decalcification programme and the protection against dry running of the heating, the Elmasteam 8 med is highly reliable and fit for use for a long time.
By taking these measures and provided that the unit is being operated properly and in one-shift operation, the usual warranty can be extended to 3 years.
Elmasonic P
Elmasonic P
Elma, Elmasonic, Elmasonic P, ultrasonic cleaning, ultrasonic cleaning deviceElmasonic P – Ultrasonic Cleaning Device
The most professional way of using ultrasound.
Equipped with special functions, the Elmasonic P units are the ideal assistant for tasks and applications in analytical and medical laboratories or for intensive cleaning in industrial areas.
The product line comprises 6 machine sizes and multi-frequency technology with 37/80 kHz for different applications. The standard applications are performed at 37 kHz while finer cleaning processes with increased cleaning time run at the high frequency of 80 kHz. The high frequency is also hardly audible (even when the cover is open). Special functions such as Sweep, Pulse and Degas can be individually activated and complete the equipment.
Elmasonic Med
Ultrasonic cleaning
according to the latest laws.
Elmasonic Med* is the series of efficient and MDR compliant ultrasonic cleaning devices (3 – 90 l). Elmasonic Med devices are used for the pre-cleaning of instruments, protheses and implants in:
Medical centers and dental practices
Hospitals and CSSDs
Dental laboratories
Foot care salons
Tattoo und piercing studios
With 37 kHz ultrasonic frequency and 5 ultrasonic modes even stubborn contaminations can be removed.
degas – Quick degassing
eco – Quiet and engergy efficient operation as well as long device service life
sweep – More consistent ultrasonic cleaning
pulse – For the stubbornes of contamination
dynamic – Automatic change between pulse and sweep modes for even better cleaning results
S1 New Bone
Sticky Bone without Blood Collection!
-Product Description
S1 Dental
* Bovine Bonegraft
* Moldable & Customizing
* Sticky bone made easily with saline or blood
Bovine Bone Mineral
•Unable to mold
No space maintenance → Mouldable & Customizing
•No adhesion, No fixation → Customizied build up
•Blood collection to make sticky bone → Sticky bone made easily with saline or bloodn
S1 has similar structural characteristics with human bones
Due to its high porosity, S1 provides the most optimal environment for promoting osteoblast adhesion, blood vessel formation, and bone regeneration.
*Excellent adhesion and fixation
*Rigid Space Maintenance
*Excellent osteoconduction
*Easy to manipulate
*Various indications
High porosity
•Percentage of porosity is more than 70%
•High porosity allows rapid penetration of growth factors
Excellent shape maintenance
• Perfect shape maintenance against high pressure from outside compared to other bone
High wettability
• Porous structure makes blood circuldlion easily
BOSS
Bovine bonegraft manufactured by Sintering Technology of MedPark
Biocompatibility
* High blood permeability, similar pH to body fluids, rapid new bone formation without inflammatory reactions
* Sticky bone formation through PRF and CGF with independent process technology
Excellent Pore Structure
* Selection of proper size of graft materials for suitable environment for bone regeneration
* Increased micropores allows the migration of osteoblasts for increasing new bone formation
Easy Manipulation
* Enhanced hydrophilicity allows user to manipulate easily
* Applicable to various indication such as Socket Preservation, Sinus lift, Periodontal Defects and Ridge Augmentation
Perforations similar to human bones
High pore rate confirmed by the Porosimeter Test
Rough surface of microstructure makes osteoblast stick to the surface easily
(* Measure the size and pore rate of pores present on the sample surface by adsorbing mercury on the specimen)
Excellent bone formation & biocompatibility* Safe and stable bonegrafts without toxicity
* Cell survival rate was equivalent to that of the Product ‘B’
* Complete safety and stability verification as bonegraft
* Excellent biocompatibility, good differentiation of osteoblasts
| Type | Product | Porosity (%) |
| Boss | 70.20 | |
| Powder | Company ‘A’ | 48.74 |
| Company ‘B’ | 36.36 |
![Prosthetic Restoration Jaw Model (32 teeth) [CON2001-UL-HD-FEM-32]](https://dental.bintangsaudara.com/wp-content/uploads/2021/04/product_1_10-12-2018-1544434733-300x300.jpg)
