CMS Dental
Showing all 8 results
-
Equipment / Dental Unit / X-Ray / Etc, Light Curing
FlashMax P3
The world’s most powerful curing light
The FlashMax P3 has already proven to be the world’s most powerful curing light. So how could we make it even better? By inventing and introducing IAF – Intelligent Automated Functions.
So far all dentists have worked manually. With IAF that all changes. The douple tap is a convenient way to build up larger restorations.
The rapid automated function is a continuous fire mode ideal for cementing multiple veneers, orthodontic brackets and other multiple applications.
Redesigned and loaded with new functions
- Efficient
FlashMax P3 lights cure all currently known dental materials with a powerful light emission of the required spectrum. - Time saving
FlashMax P3 being the worlds most powerful curing light allows you to reduce chair time significantly. FlashMax P3 cures any composite in 1-3 seconds per layer. - Reduce risk of cross contamination
By curing the composite instantly we reduce the risk of cross contamination. It can be a challenge to keep the area dry and moist areas compromises the final result. - Cordless and ergonomic
FlashMax P3 has a convenient pen grip and with its weight of barely 120g it lies well balanced in the hand of the operator. The combination of the instant curing, the cordless device and the light weight offers highly improved ergonomics, reducing the strain on back, arm and hand. - Bilateral identical control buttons
How do you treat the upper and lower arches with maximum efficiency? With a rotating tip? No, with a rotating light! You have identical control buttons on either side, so simply rotate the light for the best angle! The control buttons are still where you need them!
Input power 100-240VAC, 50/60Hz Output power 5VDC, 1.0A Battery type LiFePO4 Nominal voltage 3.2V Nominal capacity 1.200 mA Charging time 2 hours User time Approx. 500 sec Output intensity 5000-6000 mW/cm2 Wavelength (P3 and P3 Ortho) 440-480nm (Peak: 460 nm) Wavelength (Wide Spectrum) 390-480nm (Peak: 460 nm) Weight 120 g Temp. protection of diode Yes CE class I Electrical classification Class 2 (EN 60601-1:2006) LED classification Class 2 (EN 60825-1:2001)
SKU: n/a - Efficient
-
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area Models
FotoSan?? 630
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area ModelsFotoSan?? 630
CMS Dental has developed a unique dental product, combining a strong red light and a photo sensitive chemical. This product called FotoSan® 630 offers the dentist new treatment options for many conditions that untill now have been very difficult to treat succesfully.
In short the treatment has a specific antimicrobial (bacteria, vira, funghi) effect, totally without risks or side-effects. FotoSan® 630 treatment is therefore potentially the most potent and important adjunct to SRP in the treatment of periodontitis and periimplantitis.
We focus on dental applications. The FotoSan® 630 light and FotoSan® Agent are therefore designed and developed specifically with the application in the oral cavity in mind.
Docking station with rubber feet.
Solid and stabile placement of light in a 360 degrees position. A magnet grip makes it easier to place the light and keep it in an upright position.
Disposable covers secure optimal hygiene.
The tips are attached with a firm push and rest in a small hinge, which means they can be moved +/- 15 degrees. Tips are removed by being pushed forward out of the hinge.
Buttons and indicator diode
Indicator diode : The indicator dioden is visible from both sides. It emits greeen, orange or red light, constant or pulsing. The diode activity signifies charging status, light activity, thermal status etc. A complete description can be found in the manual.
Pen grip with two activation from both sides. You may turn aroun the light in your hand for optimal access to upper and lower jaw. The identical buttons on both sides ensure optimal ergonomics.
Function FotoSan®
The FotoSan light has a unique feature: Intelligent automatic functions. It means that we have created programs to make the clinical application somewhat faster and easier for you.
In total there are three programs: green, orange and red. See table.
The green is the manual use, one press on the button, one light cycle.
In the orange program one press gives two light cycles of 20 s on large buttons, and one 20 s on the small.
In the red program, you get 4 cycles each of 10 s from one push one the large button and 2 cycles from one push on the small button.
The FotoSan® light
Battery type LiFePO4 Nominal voltage 3.2 V Nominal kapacity 1.200 mA Charging time 2 h User time Approx. 500 sec Out-put intensity 2.000-4.000 mW/cm2 Wavelength spectrum 620-640 nm, peak 630 nm Temp. protection of diode Yes CE-class 1
SKU: n/a -
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area Models
FotoSan?? Blue
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area ModelsFotoSan?? Blue
Curing composites
The FotoSan® Blue is a very powerful blue light. It cures all materials based on camphorquinone as photoinitiator. Use 2s per layer of 2-3 mm in a composite build up and finish with 5s of curing on top layer.
Treatment with Light Activated Disinfection (LAD)
Light activated disinfection is a combination treatment between a photoactive substance (photosensitizer) and light of a specific wavelength. The photosensitizer is stimulated by the light and transforms present O2 to split into radicals O. or anions O-, collectively known as ROS (=Reactive Oxygen Specimens). ROS destroys bacterial cell membranes, thus eliminating bacteria within seconds.
Light activated disinfection has become increasingly popular in dentistry in the last 4-5 years where it is used in treatment of gingivitis, periodontitis, pericoronitis, periimplantitis and root canal disinfection. The most commonly used combination is red light with toluidine blue as photosensitizer. In extracted teeth FotoSan® LAD has shown significant root disinfection capabilities. On tissue and implant model studies, FotoSan® LAD was shown to be effective against a wide range of known pathogens. In controlled clinical trials FotoSan® LAD treatment has shown significant effects on BOP, pocket depth reduction and composition of periopathogen bacteria in patients with chronic periodontitis.
Advantages of LAD
Antibiotics work in 12-24 hours. LAD works immediately and is effective against a wide variety of bacteria. As for antibiotics, there is a dose dependent effect of LAD. In practice this means that higher light energy, kills more bacteria.
According to WHO, one of the most serious challenges to our continued health care system are “super bugs”, bacteria, immune to known antibiotics. Every single time antibiotics are used, there is a potential risk of creating immunization to that specific drug. LAD does NOT create immunization. The bacteria cannot learn to become immune to the reactive oxygen specimens of the LAD treatment. LAD has no side effects at all – and as there is no immunizing effect and no side effects it means LAD may be used again and again.
- Immediate effect
- Effective against a wide variety of microorganisms
- Dose dependent effect
- No immunizing effect
- May be repeated again and again
- No side effects
LAD quick guide
- Peridontitis
Apply the FotoSan® Blue agent Gel in the pocket after scaling. Using the perio tip, light 10-20s for each surface in the pocket. The time setting depends on the pocket depth. - Endodontic disinfection
Apply the FotoSan® Blue agent Liquid in the root canal after instrumentation and rinsing. Using the endo tip, light 30-60s in the canal. The time setting depends on how deep the tip goes into the canal, i.e. size of canal. - Profound caries
Excavate until safe distance from the pulp. Apply FotoSan® Blue agent Gel in the cavity and light 30s with blunt tip (4 mm) attached. - Gingivitis
Apply FotoSan® Blue agent Gel on relevant gingiva and light 10s for every cm2 with blunt tip (8 mm) attached.
The FotoSan® Blue
Battery type LiFePO4 Nominal voltage 3.2 V Nominal kapacity 1.200 mA Charging time 2 h User capacity Approx. 760 sec Out-put intensity 3.700-4.000 mW/cm2 Out-put spectrum 450-470nm Temp. protection of diode Yes CE-class 1 Electrical classification Class 2 (EN 60601-1:2006) LED classification Class 2 (EN 60825-1:2001)
SKU: n/a -
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area Models
FotoSan® Agent
-
-
Endodontic Equipment, Endodontics, Obturator
One Step Obturator
The One-Step Obturator is manufactured without a handle for a very special reason! Instead of using your fingers to place an obturator in a posterior canal, use a tweezer instead for better visibility!
The One-Step shaft has a circular indentation at each millimeter for length control and to facilitate breaking off the excess shaft using the tweezer. By eliminating the handle and rubber stop, access to a multirooted tooth is greatly enhanced. The tip of the tweezer indicates your working length.
The One-Step box has 20 individually labeled compartments containing one obturator. Using the tweezer, simply grasp the obturator shaft at the relevant working length. The endo ruler imprinted on the compartment is accessible for either right or left handed use. There is also an endo ruler imprinted on top of the box to confirm the working length. The intro kit contains an assorted box of sizes from 20 to 60.
The refill boxes are color coded for ease of selection. In addition, sizes 35-60 are also offered in an assorted
box with the sizes imprinted on each compartment.The One-Step heater will accommodate four obturators simultaneously. Total heating time is one minute. However, the obturators will be maintained at the proper temperature for 15 minutes or more. The Intro Kit includes two tweezers.
Input power 100-240V AC, 50/60 Hz Output power 9V DC, 1,7A EU plug is standard. UK og US plugs are available.
SKU: n/a -
-
Endodontic Equipment, Endodontics, Obturator
Soft Core Obturator
The Soft Core System, following its introduction in 1996, is still one of the fastest and simplest means to 3 dimensionally fill a root canal and produce a complete apical seal. With over 20 million canals obturated, Soft Core has withstood the test of time for over 15 years!
The unique features of Soft Core allow it to be used with all file systems, whether it be hand files or rotary files.
In addition, the advantages over other obturation techniques are obvious :
- Less expensive
- Detachable handle
- Easier post space creation
- Gamma irradiated obturators packaged in individual compartments
Soft Core Obturators are manufactured with a radiopaque plastic core coated with injection molded thermoplastic gutta percha.
The handle and insertion pin may be removed leaving a hollow portion in the coronal section of the core. This facilitates post space creation using our Core Remover bur.
The handle and insertion pin may also be snapped off at the orifice of the canal once the gutta percha has cooled. Removing the handle after each canal is obturated will increase access and visibility when filling multi rooted teeth.
Soft Core is available in sizes #20 through #70. The taper is compatible with all file systems.
The Soft Core Heater can accommodate four obturators at one time – ideal for multi rooted teeth. The heating time is 60 seconds. However, the unit prevents overheating to allow use of the obturators as they are needed.
The Soft Core Package is designed with six individually sealed compartments to avoid cross contamination of the obturators. Each compartment has an easy peel off seal.
Input power 100-240V AC, 50/60 Hz Output power 9V DC, 1,7A EU plug is standard. UK og US plugs are available.
SKU: n/a
