Conservative Dentistry

Active substances : Alkylamine, QAV

Available as : 50 wipes per box

Wipe size : 17.5 x 28 cm

Active substances : Alcohols

Acrylic soft lining material as soft as tissue conditioner

Durability is six months to a year by using with a denture cleanser Clean Soft for exclusive use.

A denture cleanser exclusively for soft lining material, “Clean Soft” should be used to prevent a lining surface of the denture from being ruined.

Acrylic soft lining material has many merits;

1. an additional lining of denture is possible in the mouth,
2. silicon fitting examination can be used,
3. little separation from a denture base,
4. viscoelastic so has better mastication efficiency than silicon material.

A denture cleanser exclusively for soft lining material, “Clean Soft” should be used to prevent a lining surface of the denture from being

Fit Checker is a silicone material most suitable material for revealing high spots and pressure points of a prosthesis. All procedures can be done quickly, easily and neatly.

The only autoclavable polymer ejector in the market

More confortable during handling

CMS Dental has developed a unique dental product, combining a strong red light and a photo sensitive chemical. This product called FotoSan® 630 offers the dentist new treatment options for many conditions that untill now have been very difficult to treat succesfully.

In short the treatment has a specific antimicrobial (bacteria, vira, funghi) effect, totally without risks or side-effects. FotoSan® 630 treatment is therefore potentially the most potent and important adjunct to SRP in the treatment of periodontitis and periimplantitis.

We focus on dental applications. The FotoSan® 630 light and FotoSan® Agent are therefore designed and developed specifically with the application in the oral cavity in mind.

Docking station with rubber feet.

Solid and stabile placement of light in a 360 degrees position. A magnet grip makes it easier to place the light and keep it in an upright position.

Disposable covers secure optimal hygiene.

The tips are attached with a firm push and rest in a small hinge, which means they can be moved +/- 15 degrees. Tips are removed by being pushed forward out of the hinge.

Buttons and indicator diode

Indicator diode : The indicator dioden is visible from both sides. It emits greeen, orange or red light, constant or pulsing. The diode activity signifies charging status, light activity, thermal status etc. A complete description can be found in the manual.

Pen grip with two activation from both sides. You may turn aroun the light in your hand for optimal access to upper and lower jaw. The identical buttons on both sides ensure optimal ergonomics.

Function FotoSan®

The FotoSan light has a unique feature: Intelligent automatic functions. It means that we have created programs to make the clinical application somewhat faster and easier for you.

In total there are three programs: green, orange and red. See table.

The green is the manual use, one press on the button, one light cycle.

In the orange program one press gives two light cycles of 20 s on large buttons, and one 20 s on the small.

In the red program, you get 4 cycles each of 10 s from one push one the large button and 2 cycles from one push on the small button.

Curing composites

The FotoSan® Blue is a very powerful blue light. It cures all materials based on camphorquinone as photoinitiator. Use 2s per layer of 2-3 mm in a composite build up and finish with 5s of curing on top layer.

Treatment with Light Activated Disinfection (LAD)

Light activated disinfection is a combination treatment between a photoactive substance (photosensitizer) and light of a specific wavelength. The photosensitizer is stimulated by the light and transforms present O₂ to split into radicals O. or anions O-, collectively known as ROS (=Reactive Oxygen Specimens). ROS destroys bacterial cell membranes, thus eliminating bacteria within seconds.

Light activated disinfection has become increasingly popular in dentistry in the last 4-5 years where it is used in treatment of gingivitis, periodontitis, pericoronitis, periimplantitis and root canal disinfection. The most commonly used combination is red light with toluidine blue as photosensitizer. In extracted teeth FotoSan® LAD has shown significant root disinfection capabilities. On tissue and implant model studies, FotoSan® LAD was shown to be effective against a wide range of known pathogens. In controlled clinical trials FotoSan® LAD treatment has shown significant effects on BOP, pocket depth reduction and composition of periopathogen bacteria in patients with chronic periodontitis.

Advantages of LAD

Antibiotics work in 12-24 hours. LAD works immediately and is effective against a wide variety of bacteria. As for antibiotics, there is a dose dependent effect of LAD. In practice this means that higher light energy, kills more bacteria.

According to WHO, one of the most serious challenges to our continued health care system are “super bugs”, bacteria, immune to known antibiotics. Every single time antibiotics are used, there is a potential risk of creating immunization to that specific drug. LAD does NOT create immunization. The bacteria cannot learn to become immune to the reactive oxygen specimens of the LAD treatment. LAD has no side effects at all – and as there is no immunizing effect and no side effects it means LAD may be used again and again.

• Immediate effect
• Effective against a wide variety of microorganisms
• Dose dependent effect
• No immunizing effect
• May be repeated again and again
• No side effects

LAD quick guide

• Peridontitis
  Apply the FotoSan® Blue agent Gel in the pocket after scaling. Using the perio tip, light 10-20s for each surface in the pocket. The time setting depends on the pocket depth.
• Endodontic disinfection
  Apply the FotoSan® Blue agent Liquid in the root canal after instrumentation and rinsing. Using the endo tip, light 30-60s in the canal. The time setting depends on how deep the tip goes into the canal, i.e. size of canal.
• Profound caries
  Excavate until safe distance from the pulp. Apply FotoSan® Blue agent Gel in the cavity and light 30s with blunt tip (4 mm) attached.
• Gingivitis
  Apply FotoSan® Blue agent Gel on relevant gingiva and light 10s for every cm2 with blunt tip (8 mm) attached.

Crown removal instrument

Advantages :

• Optimal ergonomic design for better control of forces
• Secure grip thanks to special rasped finish with small sharp pins
• Changeable rubber pads which do not damage prosthetic appliances
• Gentle on ceramic and resin veneered surfaces/crowns
• Emery powder to optimize grip
• Stainless steel construction
• Easy sterilization and disinfection

GLUMA® Etch – safe etching

GLUMA Etch Gel is an etching agent based on orthophosphoric acid. It is used to etch enamel and condition dentine in the context of adhesive filling therapy.

Powerfully precise. Round for round

The Eco Line spindle has a drill guide with steel sleeve for maximum concentricity and a holding force of 30 N. The perfect balance of each rotor guarantees a vibration-free running and maximum wear resistance.

Unchecked silent running with every rotation

Powerfully precise. Round for round

The Classic Line spindle has a two-part drill-bit guide with a carbide shell for the highest level of concentricity and resistance to bending. With over 40 N of retention force, the spindle guarantees that the drill bit is securely held.

The vibration-free running allows optimum handling results and results in a sound level of less than 60dB. This makes the Classic Line the quietest turbine in its class.

Unchecked silent running with every rotation

Hæmostatic, analgesic and germicidal preparation for topical use on soft tissue.

Alginate impression material for dental use

Hybrid Bond is a single-bottle, self-etching, self-priming, light-cured dentin bonding system. It does not require acid-etching of dentin or cut enamel surfaces before use. It is suitable for use with directly applied composite resins and can be cured by any light-curing devices. Hybrid Bond can also be used as the adhesive agent for indirectly fabricated restorations. It contains 4- META*, a high performance adhesive monomer that decalcifies tooth substrate and penetrates through the smear layer to form a hybrid layer, creating excellent bonds to dentin and enamel. It forms a fortified resin coat on dentin, which blocks mechanical and biological stimuli to dentin dentin-pulp.

* 4-methacryloxyethyl trimellitate anhydride