GC
Showing 1–30 of 111 results
-
Acrylics / Resin, Laboratory, Laboratory Material
Acron MC
Specially developed for polymerisation in a microwave oven, Acron MC from GC is being welcomed by dental laboratories around the world.
Acron MC, the optimum, user-friendly system, promotes successful, high quality laboratory work. Advantages of the polymerisation method include:
- fastest possible product polymerisation,
- superior physical properties,
- excellent dimensional stability due to uniform
- polymerisation.
- High fracture resistance is vital for the durability of any denture base material – as every practitioner will appreciate.The elastic modulus of Acron MC is equally important, beinga measure of its resistance to deformation by external forces.These properties are vital to the quality of any denture basematerial – and Acron MC excels. Surface hardness is another key characteristic – once moreAcron MC, with 28 Mpa (Vickers hardness), has nothing tofear from the competition.
- Perfect aesthetic results obtained with Acron MC are also impressive. Complete polymerisation in the microwave produces a smooth denture surface that effectively prevents build-up of plaque; it also greatly reduces the tendency to discolour as a result of water absorption.
SKU: n/a -
Impression Material, Materials / Medicament
Aroma Fine Plus
Alginate impression material
- Advanced formulation
- Easy and rapid powder incorporation into water within just 30 seconds
- Dust free formulation allowing fast and vigorous mixing for a smooth mixture without bubbles
- Ideal thixotropic property:
– Does not leak down the patient’s throat during impression taking
– Under pressure the alginate flows into the narrowest spaces for highest detail reproduction - Laboratory optimized:
– Compatible with a wide range of type IV stones for better detail reproduction
– Smooth model surface - Spearmint flavour for patient comfort
- Available in 2 setting types:
– Normal Set (pink) 120 seconds
– Fast Set (green) 90 seconds
SKU: n/a -
Laboratory, Laboratory Equipment, Triturator
Capsule Mixer CM-II
CAPSULE MIXER CM-II is a user friendly, digitally controlled high speed triturator with manual and pre-programmed timing modes. The capsule can easily be installed and removed. The large digital display makes it easy to operate. The CAPSULE MIXER CM-II will work with virtually all of today's encapsulated dental materials, including amalgam.
- Durable, heavy duty design
- Master "On-Off" switch on the face
- Easy-to-use "Manual" mode
- Digital timing control
- User-friendly
- Ergonomic design
- Pre-set timing mode
- Large digital display
- Maintenance-free
- Noiseless and stable operation
- Controlled, consistent mix
- Capsule image makes it easy to insert capsule in correct direction of arm
SKU: n/a -
-
Composite Filling & Adhesive, Materials / Medicament, Restorative
Ceramic Primer II
CERAMIC PRIMER II, a specialised priming agent promotes a strong bond between all aesthetic indirect restorations and resin-based cements in case of luting procedures or direct composites in case of repair.
CERAMIC PRIMER II is indicated for luting and repair of aesthetic restorations made of:
- Feldspar ceramics
- Leucite reinforced ceramics
- Lithium disilicate ceramics
- Zirconia & alumina
- Hybrid ceramics (e.g CERASMART)
- Composite
SKU: n/a -
Cad Cam, Laboratory, Laboratory Material
Cerasmart
Precision, strength and flexibility… combined with an easy to use characterisation glaze. That’s what CERASMART, the force absorbing hybrid ceramic CAD/CAM Block, stands for. It offers you unprecedented opportunities for a variety of clinical situations.
- Being capable of absorbing shocks, CERASMART is perfectly suited to handle challenging occlusal situations
- Its sharp adaptation and resistance to chipping ensure a long-lasting marginal seal
- Its balanced surface hardness will be especially beneficial in reducing the wear of the opposing dentition, while also ensuring a long lasting gloss of the restoration
And on top of that, CERASMART also offers you
- Efficient milling process with a short milling time and enhanced service life of milling tools
- Excellent polishability displaying an impressive gloss after a short polishing time
- Easy characterisation using OPTIGLAZE color, in just a few minutes
- Metal free indirect restorations: full crown, inlay, onlay, laminated veneer
- Implant supported crown
The High Translucency (HT) blocks are mainly to replace enamel: inlays, onlays, veneers, partial and full crowns.
The Low Translucency blocks are intended for the replacement of dentin and enamel structures: to mask discoloured preparations, in particular for crowns.
SKU: n/a -
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area Models
Cocoa Butter
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area ModelsCocoa Butter
Separating medium and protective coating
- Excellent separation of GIC and metal instruments
- Smooth filling contours
- Prevents cement from sticking to the adjacent teeth
- Easy to use
SKU: n/a -
Impression Tray, Miscellaneous / Others
Coe Spacer Tray
Spacer Disposable Tray
- Disposable
- Strong, rigid plastic
- Excellent stability; handle will remain intact when removing the impression
- Unique, zigzag spacer
- Anatomically designed
- Avoids pressure on lingual frenum and soft tissue
- Provides increased retention and maximum compression
- Perforated style/solid style
- Lessens the risk of cross contamination; no clean up or sterilization
- Minimizes contact of cusps to tray, ensuring sufficient bulk of impression around the teethc
SKU: n/a -
Acrylics / Resin, Laboratory, Laboratory Material
Coe-Comfort
COE-COMFORT is a self-curing, chairside edentulous tissue conditioner used to restore sound form and condition to the underlying tissue. Acting as a cushion to the tissue, a lining of COE-COMFORT allows the denture-bearing tissue to recover and return to a normal, healthy condition.
- Allows the denture-bearing tissue to recover and return to healthy condition
- Fast application
- Delayed final set allows for tissue changes (3-4 days)
- Supports the healing process
- Can be used as a functional impression material
SKU: n/a -
Acrylics / Resin, Laboratory, Laboratory Material
Coe-Soft
COE-SOFT is a resilient, self-curing reline material that is used when the patient requires a soft, temporary liner in upper or lower dentures. COE-SOFT polymerizes in or out of the mouth in approximately 15 minutes. The reline will normally last for approximately 3 months.
- Optimal fit of denture
- Avoids tissue irritation
- Neutral taste
- Excellent tolerability
- For long time temporary relining of up to 6 months
- Ideal for post surgical applications; placement of immediate denture
SKU: n/a -
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area Models
Dentin Conditioner
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area ModelsDentin Conditioner
Dentin Conditioner is a mild polyacrylic acid solution designed to remove the dentinal smear layer and to condition dentine and enamel before the application of your glass ionomer restorative. It will increase the bond between your glass ionomer cement and tooth structure for added longevity.
- Improves the marginal seal
- Longevity of the restoration
- Leaves smear plugs in the tubules
- Less risk of post operative sensitivity
- Blue tint
SKU: n/a -
Finishing & Polishing, Materials / Medicament, Restorative
Diapolisher Paste
Diapolisher Paste is a diamond paste for final high luster polishing of direct, indirect composite resin and porcelain restoration.
- Superfine diamond particles (1μm) offering the highest effectiveness in a short time
- Near perfect glossy surface for beautiful results
- Ideal surface smoothness, effective in avoiding plaque attachment and discoloration
- Comfortable for the patient: mint flavor
- Simplified handling: easy to clean off just by rinsing with water
SKU: n/a -
-
Finishing & Polishing, Materials / Medicament, Restorative
Epitex
Epitex is perfect for finishing and polishing interproximal surfaces (composite, glass ionomer or metal restorations). It is ultra-thin because abrasive particles are not bonded to the strip by adhesive. EPITEX allows easier access in tight contact points, helping to minimize gingival damage.
- Extremely thin and flexible material
- Very tear resistant
- Excellent adaptability even between tight interproximal contacts
- Handy strip dispenser
- Abrasive particles are firmly embedded into the strip surface
- Four grades
SKU: n/a -
Glass Ionomer Filling, Materials / Medicament, Restorative
Equia
Long term self adhesive posterior restorative system
- No bonding agent needed, chemical adhesion with tooth structure
- Low moisture sensitivity
- Bulk placement with only 3’30” total time needed from start to finish
- Filler content provides wear resistance and fracture toughness
- Optimal protection of marginal seal for long-lasting restorations
- Tooth coloured restorative material, with real translucency, natural gloss and smoothness
SKU: n/a -
Glass Ionomer Filling, Materials / Medicament, Restorative
Equia Forte
EQUIA Forte is the next generation of EQUIA® that combines EQUIA Forte Fil and EQUIA Forte Coat to build a strong, superior bulk-fill system.
EQUIA Forte Fil's glass hybrid innovation is achieved through the introduction of ultrafine, highly reactive glass particles, dispersed within the conventional Glass Ionomer (GI) Structure. With the addition of a higher molecular weight polyacrylic acid, the new glass hybrid formulation builds a high strength restorative. EQUIA Forte Coat incorporates a new multi-functional monomer that produces a tougher resin matrix. Together, these innovations result in a strong bulk fill glass hybrid restorative system with exceptional physical properties and aesthetics.
In comparison to original EQUIA, EQUIA Forte extends the indications to include stress bearing Class II Restorations, and is available in brand-new, red packaging. EQUIA Forte Coat is available in a bottle (4 mL) and a NEW unit dose pack (contains 50, 0.1 mL units).
EQUIA Forte is ideal for Class I, II and V restorations. Key benefits of EQUIA Forte:
- Bulk-fill
- Easy and quick to use
- Not technique sensitive
- Non sticky and packable
- No polymerization shrinkage or shrinkage stress
- Optimal marginal seal that offers long-term resistance to microleakage and discoloration
- High fluoride release at tooth restorative interface with recharge capability
- Outstanding resistance to wear and acid erosion
- Available in 8 aesthetic shades
SKU: n/a -
Fiber Splint, Materials / Medicament, Restorative
everStick??C&B
With GC everStickC&B you can prepare composite bridges reinforced with fibres in one single visit, using a reversible and minimally invasive technique.
This evidence-based fibre reinforcement technology provides you with a metal-free, cost-effective treatment method to complement your prosthetic treatment choices.
For every indication to replace missing teeth either temporarily, transitionally or for a long-term:
- Surface retained bridges, Inlay and onlay bridges
- Hybrid bridges
- Full cover crown bridges
- Implant-supported bridges
- Temporary bridges
- Immediate bridges
SKU: n/a -
Fiber Splint, Materials / Medicament, Restorative
everStick??Net
With its extremely thin and aesthetic bi-directional fibre mesh, everStickNET is the optimal choice for labial splints in trauma cases. This pre-impregnated glass fibre splint offers a minimally invasive solution featuring reliable bonding, optimised handling properties and aesthetics.
- Labial splinting of traumatized teeth
- Labial periodontal splinting
- Repair and reinforcing of veneers, crowns
SKU: n/a -
Fiber Splint, Materials / Medicament, Restorative
everStick??Ortho
everStickORTHO is indicated for the aesthetic retention phase after active orthodontic treatment. The resin matrix holds the individual glass fibres in a bundle, which facilitates the handling and adaptation to the arch.
Patient-friendly metal-free orthodontic retainers
SKU: n/a -
Fiber Splint, Materials / Medicament, Restorative
everStick??Perio
everStickPERIO is a bundle of pre-impregnated unidirectional glass fibres, indicated for minimally invasive and reliable splinting of mobile teeth. Featuring optimal handling properties and aesthetics, it also offers a long-lasting and comfortable solution for periodontally compromised patients.
- Surface-retained or intra-coronal splinting
- Combined periodontal splints and surface-retained bridges
SKU: n/a -
Materials / Medicament, Pin & Post, Prosthetic
everStick??Post
Whether you have to restore a curved, a large or a simple straight root canal, GC offers you a perfect and adapted solution to simplify and strengthen your core build-up restorations.
GC everStickPOST is a soft, flexible and unpolymerised glass fibre post which can be individually adapted to the shape of the root canal.
The unique GC everStickPOST is especially suited to fit the morphology of atypical canals such as curved, oval as well as very large root canals.
SKU: n/a -
Composite Filling & Adhesive, Materials / Medicament, Restorative
EverX Posterior
Fiber reinforced composite for dentine replacement
- Short fibres prevent and stop the progression of fracture in the restoration
- Fracture toughness equivalent to dentine and almost double that of any composite brings unsurpassed
- Strength to the restoration
- Reliable bond to overlaying composite as well as to the tooth substance
- 4mm increments can be cured simultaneously
- Minimal horizontal shrinkage as fibres contribute to shrinkage reduction in the direction of their orientation
- Economic restorative alternative for big size cavities
SKU: n/a -
Impression Material, Materials / Medicament
Exabite II NDS
Exabite II NDS is an improved, addition reaction Vinyl Polysiloxane (VPS) impression material that has significant handling and accuracy advances, extrudes easier, and sets hard very quickly. This product was developed especially for occlusal registrations.
- Mixing and application directly from the cartridge
- Thixotropic properties with an ideal balance between stability and fluidity
- High stability for safe transfer of models to an articulator
- Easy trimming and carving
SKU: n/a -
Impression Material, Materials / Medicament
Exaflex
Exaflex is a significantly advanced, addition reaction silicone (platinum catalyzed) with outstanding physical properties, optimum handling and accuracy characteristics. The reaction silicone also has a unique combination of innovative, clinical advantages for impression taking. EXAFLEX Vinyl Polysiloxane (VPS) impression materials produce crisp, extraordinarily smooth and precise impressions for models, crowns, bridges and dentures.
- Hydrophilic
- Immediate pour
- High tear strength
- Accurate impressions
- Easy to mix
- Optimized thixotropic properties
- Extended working time
- Sharp setting curve
- Hydrophilic properties
- Extremely high precision
- Ideal affinity to modelling stone materials
- High recovery from deformation
- High dimensional stability
- High elasticity
- Very tear resistant
- Can be disinfected
SKU: n/a -
Impression Material, Materials / Medicament
Examix NDS
Examix NDS is an advanced, addition reaction (platinum catalyzed) Vinyl Polysiloxane (VPS) impression material that demonstrates outstanding physical properties. This product also has a unique combination of innovative and clinical advantages for impression taking. It produces crisp, extraordinary smooth and highly precise impressions for models, crown and bridge, dentures and inlays and onlays.
- Non-slumping
- Virtually tasteless and odorless
- Unsurpassed dimensional stability
- Patented hydrogen scavenger formula
- Excellent elastic recovery and tear strength
- Thixotropic, ideal consistency and flow under pressure makes EXAMIX NDS easy to handle and extremely accurate
- Hydrophilic and thixotropic properties
- Exact reproduction of detail
- High elasticity and tear resistant
- Easy removal from the mouth
- High dimensional stability, uniform flow
- Problem free impression taking
- Hydrogen scavenger formulation, immediate pouring with gypsum
- Very good adhesion to all GC A-silicone impression materials
- Part of a complete program of impression materials
- New cartridge delivery
- Homogeneous, bubble free mixing without crossover contamination
SKU: n/a
