Laboratory
Showing 1–30 of 171 results
-
Laboratory, Laboratory Equipment, Trimmer
801 – 801DW Trimmer
Wet Model Trimmer 801-801DW.
Silfradent trimmers using water offer the following advantages:
- Strong motors which rotate the disc at 2800 rpm and at the same time maintaining a constant high torque.
- A curved and pleasant design which is also dust and water repellent .
- Continuous water flow cools and washes the disc
- The model trimmer comes with solenoid valve and tap-flow regulator.
Silfradent Specials :
- In wet trimmers, water tends to enter the zone between the disc and the motor, thus damaging motor bearings. Silfradent's viscous oil systems lubricates and protects the motor, for reliable and long usage.
An aluminium support is added to strengthen the disc against excessive pressure, thus preventing dangerous deformations during trimming.
SKU: n/a -
Aspirator, Laboratory, Laboratory Equipment
801 ASP Aspirator
801 ASP Aspirator
- Silfradent aspirators are professional equipment, built to filter out thoroughly and efficiently, materials detrimental to health.
- The various models differ in capacity and power.
- For normal sandblasting operations of shorter duration, 801ASP suffice.
- The AS1000 is recommended for more intensive use and has a bigger capacity of 37 litres.
- All models are very quiet (only 65 DBA) and built to last.
- Motor with two stages filtering system
- Casing made of ABS material (anti-rust)
Silfradent safety features :
- It is a recognised fact that inhalation of certain abrasives can lead to lung scarring and serious ill-health, especially amongst dental technicians. Hence Silfradent has equipped our aspirators with four filters to guarantee maximum filtrage :
1 Recovery bag, in robust cotton S321SACTEL
2 Anti-static, ?self-cleaning? filter S321CALZA
3 Safety micro-filter S321FILT
4 Polyester Filter S321CESTCOM
Feed power 230 Volt – Hz 50/60 (110 on request) Power 900 Watt Air flow 180 m³/h Level of noise 65 db(A) Capacity 29 litres Waterlift 2200 mm W x D x H 36 x 36 x 58 cm Weight 8 Kg
SKU: n/a -
Laboratory, Laboratory Equipment, Trimmer
801S – 801SD Trimmer
Dry trimmers 801 S – 801 SD
Dry trimming is increasingly popular as the models are more accurate, not being exposed to the changes in humidity and drying, as in the case of wet trimming. Furthermore, waste discharge can be conveniently sucked away, thus bypassing disposal environmental problems.
Silfradent dry trimmers 801 S and 801 SD also have the following features :
- Strong motors which rotate the disc at 2800 rpm and at the same time maintaining a constant high torque.
- A curved and pleasant design which is also dust and water repellent .
- Powder is vacuumed up by connecting a high power (900 watt) aspirator ( 801 ASP) to the machine.
- Both trimmer and aspirator are programmed to function simultaneously.
- Easy maintenance ? Periodic cleaning of the oil sump is done simply by removing the front cover, with an hexagonal screw key.
Feed power 230 V- 50/60 Hz (110 V on request) General switch with automatic disconnection Rotation speed 2.800 Rpm Absorbed power 800 W External disc diameter 25,4 cm Inner disc diameter 2,5 cm W x D x H 30 x 38 x 32 cm Weight 18 Kg
SKU: n/a -
Acrylics / Resin, Laboratory, Laboratory Material
Acron MC
Specially developed for polymerisation in a microwave oven, Acron MC from GC is being welcomed by dental laboratories around the world.
Acron MC, the optimum, user-friendly system, promotes successful, high quality laboratory work. Advantages of the polymerisation method include:
- fastest possible product polymerisation,
- superior physical properties,
- excellent dimensional stability due to uniform
- polymerisation.
- High fracture resistance is vital for the durability of any denture base material – as every practitioner will appreciate.The elastic modulus of Acron MC is equally important, beinga measure of its resistance to deformation by external forces.These properties are vital to the quality of any denture basematerial – and Acron MC excels. Surface hardness is another key characteristic – once moreAcron MC, with 28 Mpa (Vickers hardness), has nothing tofear from the competition.
- Perfect aesthetic results obtained with Acron MC are also impressive. Complete polymerisation in the microwave produces a smooth denture surface that effectively prevents build-up of plaque; it also greatly reduces the tendency to discolour as a result of water absorption.
SKU: n/a -
-
Articulator, Laboratory, Laboratory Equipment
Articulator ARH
A true companion
Dentatus Articulator ARH proves its value by being the most sold of all the Dentatus Articulator models ever. Being a precision instrument but yet with an unsurpassed sturdy and robust construction, the Dentatus ARH has become the standard in many countries globally. Materials used and surface finish makes our articulators stand up against everyday use for many years.
SKU: n/a -
Articulator, Laboratory, Laboratory Equipment
Articulator ARL
For efficient and accurate study of occlusal relations
Dentatus Articulator type ARL is basically the same as type ARH but with another uniqe feature which is not found in any other articulator. The ARL Articulator has an adjustable Upper Jaw Member, and with the GAUGE BLOCK the articulator can be adjusted to accenture mutual confirmity of the upper and lower jaw members. This adjustment is necessery if the upper jaw member for some reason has changed its position and also to assure correct basic settings when cooperating dentists and labratories work with their own ARL articulators.
SKU: n/a -
-
-
Cad Cam Wax, Laboratory, Laboratory Material, Wax, Wax Blanks
Cad-Cam Wax Blanks For DVX-4 Compatible Of Roland Machines
-
Laboratory, Laboratory Equipment, Triturator
Capsule Mixer CM-II
CAPSULE MIXER CM-II is a user friendly, digitally controlled high speed triturator with manual and pre-programmed timing modes. The capsule can easily be installed and removed. The large digital display makes it easy to operate. The CAPSULE MIXER CM-II will work with virtually all of today's encapsulated dental materials, including amalgam.
- Durable, heavy duty design
- Master "On-Off" switch on the face
- Easy-to-use "Manual" mode
- Digital timing control
- User-friendly
- Ergonomic design
- Pre-set timing mode
- Large digital display
- Maintenance-free
- Noiseless and stable operation
- Controlled, consistent mix
- Capsule image makes it easy to insert capsule in correct direction of arm
SKU: n/a -
-
Cad Cam, Laboratory, Laboratory Material
Cerasmart
Precision, strength and flexibility… combined with an easy to use characterisation glaze. That’s what CERASMART, the force absorbing hybrid ceramic CAD/CAM Block, stands for. It offers you unprecedented opportunities for a variety of clinical situations.
- Being capable of absorbing shocks, CERASMART is perfectly suited to handle challenging occlusal situations
- Its sharp adaptation and resistance to chipping ensure a long-lasting marginal seal
- Its balanced surface hardness will be especially beneficial in reducing the wear of the opposing dentition, while also ensuring a long lasting gloss of the restoration
And on top of that, CERASMART also offers you
- Efficient milling process with a short milling time and enhanced service life of milling tools
- Excellent polishability displaying an impressive gloss after a short polishing time
- Easy characterisation using OPTIGLAZE color, in just a few minutes
- Metal free indirect restorations: full crown, inlay, onlay, laminated veneer
- Implant supported crown
The High Translucency (HT) blocks are mainly to replace enamel: inlays, onlays, veneers, partial and full crowns.
The Low Translucency blocks are intended for the replacement of dentin and enamel structures: to mask discoloured preparations, in particular for crowns.
SKU: n/a -
Acrylics / Resin, Laboratory, Laboratory Material
Coe-Comfort
COE-COMFORT is a self-curing, chairside edentulous tissue conditioner used to restore sound form and condition to the underlying tissue. Acting as a cushion to the tissue, a lining of COE-COMFORT allows the denture-bearing tissue to recover and return to a normal, healthy condition.
- Allows the denture-bearing tissue to recover and return to healthy condition
- Fast application
- Delayed final set allows for tissue changes (3-4 days)
- Supports the healing process
- Can be used as a functional impression material
SKU: n/a -
Acrylics / Resin, Laboratory, Laboratory Material
Coe-Soft
COE-SOFT is a resilient, self-curing reline material that is used when the patient requires a soft, temporary liner in upper or lower dentures. COE-SOFT polymerizes in or out of the mouth in approximately 15 minutes. The reline will normally last for approximately 3 months.
- Optimal fit of denture
- Avoids tissue irritation
- Neutral taste
- Excellent tolerability
- For long time temporary relining of up to 6 months
- Ideal for post surgical applications; placement of immediate denture
SKU: n/a -
-
Isoparallelometers, Laboratory, Laboratory Equipment
Cruise 440
The isoparallelometer CRUISE 440 la a high precision instrument, patented and made Lo meet the needs of the most modern and demanding technical paraIlelometrics.
Following functions can be executed:
- Free hand drilling technique with vertical arrest and arm regulation by means of a special extension spring.
- A four functions cross attachment enables to make: holes, friction pins, grooves, coulisse, burr stems and 'T' attachments with micrometric vertical and cross movements. The ease of use and sophistication of the entire mechanism turns every task into sheer pleasure.
Equipment :
- Elegant black granite base
- Operational support column
- Universal portable modal pneumatic locking mechanism (for steadfast holding in position and effortless floating form moving around)
- Directional oil?air jet
- Halogen lamp
- Three dimensional pantograph arm with guiding sensor
- Suspended central control with digital commands
- Spindle for dental work designs and attachments
- Four functions cross attachment
- Bottle of oil
- 2,35 mm chuck
- Set of key for chuck's maintenance
Dimensions W x D x H 30 x 30 x 46 cm Weight 21,5 Kg Speed 1.500 – 27.000 Rpm Absorbed power 100 W Feed power 230 V Hz 50/60 (110 V on request)
SKU: n/a
