SILFRADENT
Showing all 26 results
-
Laboratory, Laboratory Equipment, Trimmer
801 – 801DW Trimmer
Wet Model Trimmer 801-801DW.
Silfradent trimmers using water offer the following advantages:
- Strong motors which rotate the disc at 2800 rpm and at the same time maintaining a constant high torque.
- A curved and pleasant design which is also dust and water repellent .
- Continuous water flow cools and washes the disc
- The model trimmer comes with solenoid valve and tap-flow regulator.
Silfradent Specials :
- In wet trimmers, water tends to enter the zone between the disc and the motor, thus damaging motor bearings. Silfradent's viscous oil systems lubricates and protects the motor, for reliable and long usage.
An aluminium support is added to strengthen the disc against excessive pressure, thus preventing dangerous deformations during trimming.
SKU: n/a -
Aspirator, Laboratory, Laboratory Equipment
801 ASP Aspirator
801 ASP Aspirator
- Silfradent aspirators are professional equipment, built to filter out thoroughly and efficiently, materials detrimental to health.
- The various models differ in capacity and power.
- For normal sandblasting operations of shorter duration, 801ASP suffice.
- The AS1000 is recommended for more intensive use and has a bigger capacity of 37 litres.
- All models are very quiet (only 65 DBA) and built to last.
- Motor with two stages filtering system
- Casing made of ABS material (anti-rust)
Silfradent safety features :
- It is a recognised fact that inhalation of certain abrasives can lead to lung scarring and serious ill-health, especially amongst dental technicians. Hence Silfradent has equipped our aspirators with four filters to guarantee maximum filtrage :
1 Recovery bag, in robust cotton S321SACTEL
2 Anti-static, ?self-cleaning? filter S321CALZA
3 Safety micro-filter S321FILT
4 Polyester Filter S321CESTCOM
Feed power 230 Volt – Hz 50/60 (110 on request) Power 900 Watt Air flow 180 m³/h Level of noise 65 db(A) Capacity 29 litres Waterlift 2200 mm W x D x H 36 x 36 x 58 cm Weight 8 Kg
SKU: n/a -
Laboratory, Laboratory Equipment, Trimmer
801S – 801SD Trimmer
Dry trimmers 801 S – 801 SD
Dry trimming is increasingly popular as the models are more accurate, not being exposed to the changes in humidity and drying, as in the case of wet trimming. Furthermore, waste discharge can be conveniently sucked away, thus bypassing disposal environmental problems.
Silfradent dry trimmers 801 S and 801 SD also have the following features :
- Strong motors which rotate the disc at 2800 rpm and at the same time maintaining a constant high torque.
- A curved and pleasant design which is also dust and water repellent .
- Powder is vacuumed up by connecting a high power (900 watt) aspirator ( 801 ASP) to the machine.
- Both trimmer and aspirator are programmed to function simultaneously.
- Easy maintenance ? Periodic cleaning of the oil sump is done simply by removing the front cover, with an hexagonal screw key.
Feed power 230 V- 50/60 Hz (110 V on request) General switch with automatic disconnection Rotation speed 2.800 Rpm Absorbed power 800 W External disc diameter 25,4 cm Inner disc diameter 2,5 cm W x D x H 30 x 38 x 32 cm Weight 18 Kg
SKU: n/a -
Isoparallelometers, Laboratory, Laboratory Equipment
Cruise 440
The isoparallelometer CRUISE 440 la a high precision instrument, patented and made Lo meet the needs of the most modern and demanding technical paraIlelometrics.
Following functions can be executed:
- Free hand drilling technique with vertical arrest and arm regulation by means of a special extension spring.
- A four functions cross attachment enables to make: holes, friction pins, grooves, coulisse, burr stems and 'T' attachments with micrometric vertical and cross movements. The ease of use and sophistication of the entire mechanism turns every task into sheer pleasure.
Equipment :
- Elegant black granite base
- Operational support column
- Universal portable modal pneumatic locking mechanism (for steadfast holding in position and effortless floating form moving around)
- Directional oil?air jet
- Halogen lamp
- Three dimensional pantograph arm with guiding sensor
- Suspended central control with digital commands
- Spindle for dental work designs and attachments
- Four functions cross attachment
- Bottle of oil
- 2,35 mm chuck
- Set of key for chuck's maintenance
Dimensions W x D x H 30 x 30 x 46 cm Weight 21,5 Kg Speed 1.500 – 27.000 Rpm Absorbed power 100 W Feed power 230 V Hz 50/60 (110 V on request)
SKU: n/a -
Laboratory, Laboratory Equipment, Separator
Cutter 970
To slice models quickly, cleanly and safely, Silfradent has come up wtih the stump-tooth separator Cutter 970. With just one movement, stumps are separated impeccably every single time. This is particularly useful with the techniques Dowel Pins, Accu Trac and Tricodent.
Silfradent Safety Aspects :
- Security cover for the diamond disc, preventing any accidental contact with the disc
- Electromagnetic floor, with strong pull to ensure maximum stability of the impression tray
- Swift action – special two handed ignition mechanism which activates simultaneously two buttons and sets the disc in rotation.
- Safe recovery – A special extension spring, returns the cutting arm back to it's resting position.
- Quick stop – Once the commands are released, the transmission belt interrupts the rotation after few seconds.
For clean surroundings – We advise combining the CUTTER 970 to the aspirator 801ASP (900 watt). A universal connection is provided for at the back of the cutter. The diamond disc is suitable for cutting plaster models and resin materials. The machine is equipped with the Dowel-Pins impression tray. The Impression trays Accu-Trac and Tricodent are available as optionals.
Equipment :
- Electro magnetic model holder DOWEL PINS
- Halogen lamp 5 W 12 V
Power 60 Watt Speed 2800 Rpm Disc diameter 8 cm Cut thickness 0,25 mm Predisposed for aspirator 801 ASP (900 Watt) W x D x H 22 x 39,5 x 26 cm Weight 14 Kg
SKU: n/a -
Drill Machine, Laboratory, Laboratory Equipment
Drill FG 900
It''s constructed for high precision work. FG 900 provides absolute control and yet effortless drilling.
Characteristics include :
- Excellent visibility of selected point located by the laser pointer
- It also enables hands-free drilling of plaster models, resin or plexiglass bases.
- Exact depth perforation can be increased or decreased between burr and work level by means of the adjustment nut.
- Drilling micrometric regulation.
- The machine is equipped with a special spindle which can be adapted to different burrs by using variable chucks (the standard one covers sizes between mm2,8 and mm3,2).
- FG 900 is therefore compatible with all model systems.
- It comes with a cone shaped tungsten burr from 2 to 3 mm.
Equipment :
- Set of keys for spindle & chuck maintenance
- Conical burr 902FR
Feed power 230 V – 50/60 Hz (110 V on request) Power 80 W Speed 2.800 Rpm Spindle for chucks between 2,8 mm and 3,2 mm Laser pointer W x D x H 15,5 x 16,5 x 37 cm Weight 6,7 Kg
SKU: n/a -
Laboratory, Laboratory Equipment, Sand Blasters
Easy Sand
A straightforward sandblasting system suitable for all degreasing/blasting operations. Nozzle tips, of the hardest widia material, ensure long usage and maximum precision. Equipped with a wide blasting chamber which offers excellent manoeuvrability. Completely pneumatic working system, with pressure regulator placed outside, for clog free working. High luminosity and visibility: with a low consumption 11W cold light, high output comparable to 60W, 6.000 lumen for 15.0000 h duration.
- High capacity sand transport system: It ensures smooth transport of any type of sand aluminium oxide, quartz beads from 25 to 250 micron.
- Precise and colour coded ergonomic spray jet pens, with widia tips.
- Suction air grating improves aspirator function.
- Tank selection dial with same-coloured corresponding tips.
- Perfect view – glass cover protected by an easily replaced crystal clear shield to prevent scratches or being etched.
Equipment :
- Inner sand brass pipe from 100 to 250 micron
- Widia tip 1,2 mm-size
Feed power 230 V – 50/60 Hz (110 V optional) High performance filter to eliminate oil and water residues Operative pressure adjustable range from 1 to 7 bar Air consumption 100 L min-max Tank capacity 1 Kg W x D x H 38 x 33 x 43 cm Weight 11 Kg
SKU: n/a -
Laboratory, Laboratory Equipment, Presses, Flasks & Clamps
Flask 110
This sealing box is made of fully cast parts. The box is also made of forged brass to ensure the most complete and secure results. Attention is paid to the mechanical finishing to obtain perfect sizing, especially the draw angles, for more efficient forming. Dim. cm. 10×8,5×5,5 h.
SKU: n/a -
Laboratory, Laboratory Equipment, Presses, Flasks & Clamps
Flask 115
These flasks are made of two circular parts in forged brass, are mechanically finished for a perfectly smooth finishing. The merit of this flask is the possibility of enlarging the box by loosening the screws, which facilitates formings. Dim.: Ø 5 cm. x 4 h
SKU: n/a -
Grinder, Laboratory, Laboratory Equipment
Grinder RP 100
High speed grinder RP 100
- The induction grinder, of Casali fame, is known for extreme durability and tough performance.
- Average problem-free lifespan of 30 years or more is common.
- Unique feature:- Smooth tool changeover: -The “non stop” spindle (S019) is supported by a swinging arm enables tool to be changed while motor is running. Workflow is continuous and time saved for higher productivity.
- Precision – The spindle comes in contact with the dental prothesis gently, for painstaking work.
- Hence the Rapida does not have a built in aspirator but a Vacuum Shell base with an outlet for connection to the (optional) BR100 suction bench.
- Working area is well-lit, with a movable lamp for accurate positioning. Bulbs are commercially available for easy replacements.
Equipment :
- Halogen lamp: 5 W 12 V
- Security cover for spindle
Feed power 230 V – 50/60 Hz (110 V on request) Maximum speed 20.000 Rpm Absorbed power Transmission belt with tension device Predisposed attachment for aspirator with 62 mm inner diameter W x D x H 29 x 34 x 26 cm Weight 18 Kg
SKU: n/a -
Furnaces, Laboratory, Laboratory Equipment
Logic Heat
Multi-stage pre-heating furnace. 20 pre-heating programmes
This range of furnaces has the following features:
- Delayed auto-start to 100 hours
- 6 temperatures selectable stages with ramp/time rise and pause control with holding temperature ability to 100 hours
- Each consecutive selection can be pre-set for a higher or a lower temperature
- 5 rapid programmes with pre-set temperature without pause control
- Door safety switching mechanism which turns the furnace on when the door is closed and off when it is open
- All parameters can be modified during usage
- All models can be supplied with a fume extractor unit
- Muffles of a ceramic material for a 100% perfect heat distribution
- With power failure the furnace re-starts operation automatically
- Menu-Display: Italian-English-French-German-Spanish
SKU: n/a -
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area Models
Medifuge MF200
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area ModelsMedifuge MF200
The Silfradent Medifuge MF200 is a dedicated medical plasma centrifuge. It is designed to prepare autologous concentrated growth factor (CGF) using patient's own blood wich is the ideal autologous source without the addition of exogenous substances. CGF represents a new generation of platelet that able to hold inside a higher concentration of autologus
Growth factors are proteins which regulate the complex processes of wound healing and enhance the body's healing abilities without side-effects. The Medifuge prepares up to 8 test tubes of various levels of concentrate with active proteins in liquified or Fibrin form to create membranes, glue or other particulars for tissue regeneration and bone augmentation in a short period of 12 minutes.
Product Features :
- This unique medical device allows for the use of up to 8 test tubes for the creation of CGF (fibrin)
- A micropocessor control system allows for the maintaining of a constant speed
- The exception rotor system with self-ventilation protects the blood sample from heat exposure. The rotor-holding compartment, the closing door and the test tube-holding jackets guarantee biological safety in terms of bio-containment, in the event of test tube breakage
- The test tube-holding jackets and rotor are built from thermal, antistatic material that is easy to clean, extract and sterilise in an autoclave at 135°;
- MEDIFUGE is equipped with a decontamination cyclewith UVC reflected light
- Cycl duration 5 minutes at 1,000 revs
- The electronic control engine and its internal parts require no maintenance
- Noise levels fall below the standards required and do not exceed 57 dBa.
- The Medifuge has a wide areas of use, of which Maxillo Facial Surgery, Oral Surgery, Cosmetic Surgery.
Area of use
- Orthopedic surgery;
- Maxillo facial surgery;
- Oral surgery;
- Ophthalmology;
- Cosmetic surgery;
- Sport medicine;
- Dermatology;
- Gynecology;
- Neurosurgery.
Type Medical plasma centrifuge Applications Preperation of Concentrated Growth Factor (CGF) Indications Tissue and bone regeneration for implantology and oral surgery Capacity 8 units (test tubes) Processing Time 12 minutes Power Source 230 V +/- 10% 50/60 Hz Noise Level Don't exceed 57 dB(A) Dimensions of Unit 230 W x 320 L x 240 H mm Weight 9.4 Kg Country of Manufacture Italy
SKU: n/a -
Isoparallelometers, Laboratory, Laboratory Equipment
Minicruise 420 JM
Milling Machine
Tridimensional pantograph arm + complete micromotor + programming arm 425BRA
The Minicruise 420 JM is a simple and economical instrument for any type of dental milling by hand.
On the lower part of the column, which rises from the base, the pneumatic circuit commands are found. On the upper part, is placed the pantograph arm.The pantograph arm is characterised by its manoeuvrability, by a support designed for a fast attachment to the micromotor and by the ability to adjust the height for predetermined operations. Located on the lower part of the column are the controls for the cooling jets and the pneumatic base depressor.
The addition of the arm art. 425BRA makes it possible to direct the pantograph, both on the vertical and on the lateral axes of the machine, thus allowing guided working of holes, interlock channels, and attachment mounting. The spindle for projection and attachment setting is optional.
Equipment :
- Set of key for chuck's maintenance
- 2,35 mm chuck
- Bottle of oil
- Halogen lamp
- Universal portable modal pneumatic locking mechanism (for steadfast holding in position and effortless floating form moving around)
- Elegant black granite base
- Control unit with digital controls
Micromotor speed 1.500-27.000 Rpm Micromotor absorbed power 100 W Micromotor feed power 230 V Hz 50/60 (110 on request) W x D x H 28 x 25 x 36 cm Weight 13 Kg
SKU: n/a -
Laboratory, Laboratory Equipment, Mixer
Mixer 805
The 805 Mixer is a versatile machine, mixing and pouring investment and plaster materials. It can perform a complete cycle (mixing and pouring) or under partial vacuum, as desired.
Characteristics :
- An electronically controlled, geared motor to activate the mixing cups directly below it.
- A digital timer to predetermine mixing times, right down to seconds.
- Mixing times can even be increased, decreased or stopped during the working phase.
- Same data used last is indeed stored thanks to the incorporated microprocessor.
- Built in vibrator: the compactness of the investment can be improved during the mixing phase by switching on the vibrator button
- Supplied with a 2 m3 pump, this instrument is able to create a full vacuum instantly.
- Mixing bowls are designed such that remains of contents can be easily tipped out.
- All the metal components are made of stainless steel to guarantee long use.
Equipment :
- 805TAZ standard bowl complete with pouring regulator suitable for investment 650 cc
- 805TAZGES: standard bowl suitable for investment and plaster – 650 cc
- 805COPTAZ: cover for bowls 805TAZ or 805TAZGES
- 805RUBCOMP: tap/faucet for cover 805COPTAZ
- 805DISTAZ: separator for bowls 805TAZ or 805TAZGES
Feed power 230 V (110 V on request) 50/60 Hz Power 600 W W x D x H 25.5 x 30 x 59 cm Weight 23 Kg
SKU: n/a -
Laboratory, Laboratory Equipment, Mixer
Mixer MC 806
A new generation mixer with innovative features enabling best mixing of all traditional and new type investment and plaster materials.
- Vacuum pressure set-up level for weight of the material with pre-spatulation timed mode with clockwise and anti-clockwise rotation
- Venturi vacuum system for maintenance free operation
- Three dimensional spatulation system: horizontal-diagonal-vertical with set up of rotation mode for type and volume of material
- Vibrator programmed for vibration force and time
- The mixer can be fitted with a micromotor with brushes from the Silfradent laboratories
- All stainless steel unit with an in-built
- Polycarbonate long-life mixing bowls and easy cleaning
- A step programming menu with easy settings for: beep – contrast – type of display – language – mixer – micromotor
- During manual operation the controls can be accessed directly to switch individual functions on and off.
- During automatic operation each component function can be programmed to switch on and off: vibration, mixing, vacuum. All controls are fully intuitive.
- A micromotor of MM 330 – MM 330V at 27.000 rpm can be operated with the mixer
- Incorrect usage blocking mechanism
- Working data can be set directly
- Memory with 10 pre-set programs with rapid scrolling with temporary or memory up-grade modification of variables
- During a work-cycle variable can be modified
Equipment :
- MC 806CO: cover for bowls MC 806TC or MC 806TG
- MC 806TC: standard bowl complete with pouring regulator suitable for investment – 650 cc
- 805RUBCOMP: tap/faucet for cover 805COPTAZ
Feed Power 230 Volt (110 Volt on request) – 50-60 Hz Dimensions 25 x 27 x 61 cm Weight 18,5 Kg
SKU: n/a -
Laboratory, Laboratory Equipment, Sand Blasters
Modular S
The Modular S is a practical sandblaster with a flexible modular system. It is studied to fulfil all lab sandblasting or surface finishing needs, using aluminium oxides or glass micro-beads. The dental technician can start with all three modules or just one. He can add on more modules at a later stage; from the model S 100 (with one module) to model S 300 (with three modules). This allows for specific choices of abrasives to match the technical requirements of the work.
Silfradent Specials :
- Air Humidity/ Oil Remover are built in. The condensation release switches prevent blockages common with ordinary sandblasters.
- Metal modules withstands accidental excessive pressure
- The glass cover is protected by an easily replaceable sheet to ensure clear visibility at all times.
- Controls are within sandblaster cabin for easy access.
Characteristics :
- The structure of the working chamber and the illumination system provide excellent visibility.
- Each module is equipped with pressure gauge and regulator
- Module selector
- Safe low voltage foot control pedal
- An universal connection for aspirator (Silfradent model S321ASP) is provided on the left side
- A rapid connection for air entrance is provided on the right side
- Two switches to discharge condensation by the micro filters below the air entrance.
Sandblaster with recycling
Our sandblasters are also available with a special built in recycling system. For blasting investment material and removal of casting skin/polishing.
Characteristics :
- The pressure can be regulated by means of a special indicator visible inside the manometer
- Suction device Venturi system
- For recycling Selection switch provided.
- Widiam nozzle
- It is suitable for any type of sand (aluminium oxide, glass microspheres)
Equipment :
- Lamp (9 Watt)
- Predisposed for aspirator connection
- Adhesive protection sheet for glass cover
Feed power 230V – Hz 50/60 (110V on request) High performance double filter to eliminate oil and water residues Rapid blockage device for sand Operative pressure 1-6 ATM Consumption 100 L/min. max Widiam nozzle: 1,2 mm suitable for S 100 1,0 mm suitable for S 20 0,8 mm suitable for S 300 W X D X H 42 x 53 x 35 cm Weight S 100 / S 100R : 21 Kg S 200 / S 200R : 26 Kg S 300 / S 300R : 30 Kg
SKU: n/a -
Laboratory, Laboratory Equipment, Pneumatic Chisel
Pneumatic Chisel 320
Pneumatic Chisel 320
- The pneumatic chisel 320 is specifically designed for lab technicians work with plaster and investment materials.
- Its stainless steel structure ensures maximum control, strength and vibrations-free manoeuvrability.
- The chiselling power corresponds to increases in air pressure and individual strength of the user.
- Pneumatic function ensures long working life and smooth operations.
- The handpiece is ergonomically shaped.
- Vaseline or maintenance oil suffices for daily lubrication. Alternatively, a filtering group, complete with pressure gauge, can be added for maintenance-free-usage (article 326).
- A pneumatic on/off foot pedal is also available on request ( article 325)
Equipment :
- 3 tips – dimensions 7/9/11 mm (Code 320PUNT)
- Pipe for installation 6×4 mm
Operative pressure 5/6 ATM Air consumption 40/50 Lt./min Level of noise 78 dB (A) Sliding on/off switch Length 14 cm Diameter 21 mm Weight 200 gr
SKU: n/a -
Laboratory, Laboratory Equipment, Polishing
Polix 905
Polishing machine
- The two speed polishing machine 905 is equipped with the typical sturdy Silfradent motor and has a non-rusting, solid aluminium casing. It is constructed for maximum safety during polishing procedures. This shows in the :
- Design the working space around the brushes is such that it avoids any interference with the motor during operative phases.
- Overall stability:the body of the instrument is placed on an extra large, support base to secure overall stability.
- Strong motor with continuous service provides considerable torque at two speeds (1400 rpm and 2800 rpm).
- We recommend the addition of the metal splashguards (906) for cleaner and safer surroundings.
Equipment :
- N° 2 quick release cone brush-holders
- Safety general switch
SKU: n/a -
Blood Phase Separator, Equipment / Dental Unit / X-Ray / Etc
Round Up
Rabid procedsure (1…16sec). The osteoblasts adhesive paste generated by the Round Up devise accelerates the bone regrowth and/or healing more than 60% compared to best hand mixture.
Product Features :
- Medical device for intrinsic and extrinsic molecular blend, mixing with altering the geometric dimensions of autologous, heterologous or synthetic materials, for medical use
- The system is used with liquid, semi-liquid or solid materials
- Perfect, homogenous mixing free from atmospheric contamination
- Automatic empty in just a few second: max 16 seconds
- Equipped with a decontamination cycle with UVC reflected light
Equipped with a decontamination cycle with UVC reflected light Cycle duration 5 minutes Power Source 100: 115+/-10% | 50/60 Hz Weight 19 Kg Dimension 320 P X 320 L X 300 H Nominal Power Consumption 320 VA RPM 3600 r.p.m Timer 1-16 sec
SKU: n/a -
Laboratory, Laboratory Equipment, Trimmer
SM 300
Orthodontic Model trimmer
Silfradent orthodontic model trimmer are available as :
- SM 300: dry model with diamond disc
- SM 300W: wet model with corundum disc
- SM 300WD: wet model with diamond disc
Dry trimming has the advantage that the plaster is not subjected to humidity-related shape changes. We recommend equipping the dry SM 300 with the especially conceived 801ASP aspirator (900 watt).
The wet models, connected to the main water supply, work with a continuos water flow which cools and washes the disc.
Discs
The carefully studied Orthodontic Model Trimmer is fitted with a superior diameter disc (mm 300). The diamond abrasion (SM300D) is long lasting (average 50 models /day for 5 years). It ensures perfect edges and outlines. The economic corundum disc (SM3DISC), compared to the same performance, needs to be replaced more frequently.Work tables
The work table is supplied with the following accessories: vertical trimmer, angle guide and 70 mm template. A second work plate of aluminium is supplied and can be set by 90° to the grinder or tilted by 10°, up or downwards.Equipment :
- Work table (SM3PIANO)
- Orthodontic work plate with accessories (SM300P)
Feed power 230 V – 50/60 Hz (110 V on request) General switch with automatic disconnection Speed 14.000 Rpm Power 370 W Disc diameter 30 cm Weight 19 Kg
SKU: n/a -
Laboratory, Laboratory Equipment, Suction Bench
Suction Bench BR100
The suction bench for High Speed Grinder BR100 aspirates all the dusts preventing the dispersion in the working environment.
The bench consists of a main structure divided into two sections: aspirating motor group and the filtering group.
The aspirating group is built inside the bench and is composed by an induction motor; both characteristics ensure the maximum level of noiseless. The filters can be easily inspected and cleaned by empty them into a sack. It is indeed advisable to aspirate the residues.
The working plane and the border are covered with plastic laminate.
In the front side of the bench is placed the general switch with automatic disconnection device and two drawers to contain material to be used.
While on the rear side can be found the two plugs and the switch for the current feed.
Feed power 230 V – 50/60 Hz ( 110 V on request) Absorbed power 200 W TNT cloth filter Maximum loud of the plugs 10 A General switch with automatic disconnection Maximum load 5000 l/min. Maximum absorbing distance
SKU: n/a -
Laboratory, Laboratory Equipment, Mixer
Tornado 804-804S Mixer
Mixer Machine
Innovative and easy to use mixer Machine suitable for investment and plaster. A pneumatic locking mechanism holds up the mixing bowls firmly in place (Venturi system).Vacuum by means of compressed air instead of a vacuum pump.
It saves space and is much quieter. The vacuum can be adjusted as desired. Determine your own mixing times with the help of a digital timer showing both minutes and seconds (maximum 9min-59sec). On completion, an alarm informs you that the job's ready.
Equipment :
- Mixing bowl 250 cc (mixable) code: 804TAZ500
- Mixing bowl 90 cc (mixable) code: 804TAZ200
Speed 425 Rpm Power 220 Watt Feed power 230 Volt (110 Volt on request) – 50-60 Hz Dimensions 804: W x D x H 27 x 25,5 x 51 cm Dimensions 804S: W x D x H 23,5 x 25,5 x 20 cm Weight 804 15 Kg Weight 804S 9 Kg
SKU: n/a -
Laboratory, Laboratory Equipment, Ultrasound Bath
Ultrasound Bath VS 350 – VS 600 – VS 900
The Silfradent ultrasound bath is created for optimal results and ease of use using innovative technology. Cleaning and grease removal is enhanced tremendously with the ultrasound system, as compared to traditional methods.
How Silfradent ultrasound works :
It is based on ultrasonic transmission of electricity at a frequency of around 30 Khz 30,000 movements per second.If the intensity of the ultrasound is sufficient, the cavity within the microbubbles in the liquid will build up and burst. The microexplosion takes place at a temperature of 14000 degrees and a pressure of 1000 atmospheres .
An advanced electronic control drives the transmitters to produce maximum results. A micro control monitors the supervisory system and verifies all the parameters:-control of temperature, time of working, electrical security and frequency of resonance in case of breakdown.
Why Silfradent Ultrasound Bath?
- For the price of a mechanical machine, you get a fully programmable, electronically safe vessel
- Cleaning power increases proportionately with the amount of material within the bath.
- Three levels of positive electronic temperature control
- Automatic shutdown in case of overheating, thank to a specific built in thermostat
- Safety software central processing unit (CPU) ensures optimal current supply
- In case of short-circuit, the CPU stops machine, preventing electric shocks for the user. (This feature may not be available with normal mechanical ultrasound machines)
- Additional backup system by the CPU means that you can continue using the machine in case of breakdowns
Equipment :
- Stainless steel cover (VS 350)
- Spherical liquid drain valve
- Exhausting pipe
Average power absorbed by the network 130 W (without heating) – VS350 180 W (without heating) – VS600 210 W (without heating) – VS900 Average power absorbed by heating 200 watt – VS350 400 watt – VS600 400 watt – VS900 Bath capacity 2,5 litres (VS350) 6 litres (VS600) 9 litres (VS900) Internal dimensions 238 x 138 x 100 mm – VS350 298 x 238 x 100 mm – VS600 298 x 238 x 150 mm – VS900 Liquid discharged Programmable digital timer from 0 to 30 minutes Heating of liquid programmable from 15°C to 85°C W x D x H 255 x 155 x 225 mm: VS350 315 x 255 x 270 mm: VS600 315 x 255 x 270 mm: VS900 Weight around 4 KG (VS350) around 8 KG (VS600) around 8,5 KG (VS900)
SKU: n/a -
Laboratory, Laboratory Equipment, Vibrator
Vibrator VIB15
The vibrators VIB15 create vertical oscillations evenly on the whole surface.
- The models differ only in sizes of vibrating area.
- Adjustment knob with six vibration levels ensure smooth increase in power.
- This gradual increase allows for exact adjustment and prevents occurrence of bubbles
- For easy cleaning, the rubber cover is removable and has curved inner corners.
- Silfradent special
- Vibration is contained within the vibrators and does not affect surroundings.
- Both models are equipped with a stainless steel handle, which vibrates and thus makes impression materials more compact.
Feed power 230 V (110 V on request) 50/60 Hz Power 120 W Adjustment knob with 6 vibrations levels Vibrating stainless steel handle to vibrate impressions W x D x H 15 x 18 x 10 cm Rubber plane dimensions 13 x 15 cm Weight 2,7 Kg
SKU: n/a -
Laboratory, Laboratory Equipment, Vibrator
Vibrator VIB24
The vibrators VIB24 create vertical oscillations evenly on the whole surface.
- The models differ only in sizes of vibrating area.
- Adjustment knob with six vibration levels ensure smooth increase in power.
- This gradual increase allows for exact adjustment and prevents occurrence of bubbles
- For easy cleaning, the rubber cover is removable and has curved inner corners.
- Silfradent special
- Vibration is contained within the vibrators and does not affect surroundings.
- Both models are equipped with a stainless steel handle, which vibrates and thus makes impression materials more compact.
Feed power 230 V (110 V on request) Hz 50/60 Power 320 W Adjustment knob with 6 vibrations levels Vibrating stainless steel handle to vibrate impressions W x D x H 15 x 18 x 10 cm Rubber plane dimensions 23.5 x 14.5 cm Weight 4,2 Kg
SKU: n/a -
Isoparallelometers, Laboratory, Laboratory Equipment
Zirco Cruise 410 ZC
Milling Machine Zirco Cruise with spray turbine
Zirco Cruise is a milling unit specially created and optimized for working on ceramic, metals and zircon dioxide.
- The model carrier with anti-spray protection ensures collection of water/mist Hence providing clear vision of the model and allows for great liberty of movement.
- Water is collected in a support for the contents.
- Stable movable Guiding arm without tri-dimensional disturbances
- Model carrier, with blockage and rapid insertion of the model, with an inclination of 0° – 40°
- Turbine with 300.000 rpm, carrying ceramic ball-bearings which do not require lubrification. This prevents rust and any eventual staining from oil or onto milling surface.
- Chuck can be changed quickly.
Performance :
- Free-hand milling on ceramics
- Model analysis
Equipment :
- Air Turbine with Spray
- Hydropneumatic feeder with pedal
- Draining model holder
- Model holder base locking key
- 3 Protection rings
- Slideways oil
Turbine technical data Speed: 0 ÷ 300.000 giri/min Pressure: 2,5 bar Air consumption: 35 l/min Machine Dimensions W X D X H 20 x 28 x 42 cm Weight 6 Kg
SKU: n/a
