Conservative Dentistry
Showing 121–150 of 270 results
-
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area Models
Medifuge MF200
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area ModelsMedifuge MF200
The Silfradent Medifuge MF200 is a dedicated medical plasma centrifuge. It is designed to prepare autologous concentrated growth factor (CGF) using patient's own blood wich is the ideal autologous source without the addition of exogenous substances. CGF represents a new generation of platelet that able to hold inside a higher concentration of autologus
Growth factors are proteins which regulate the complex processes of wound healing and enhance the body's healing abilities without side-effects. The Medifuge prepares up to 8 test tubes of various levels of concentrate with active proteins in liquified or Fibrin form to create membranes, glue or other particulars for tissue regeneration and bone augmentation in a short period of 12 minutes.
Product Features :
- This unique medical device allows for the use of up to 8 test tubes for the creation of CGF (fibrin)
- A micropocessor control system allows for the maintaining of a constant speed
- The exception rotor system with self-ventilation protects the blood sample from heat exposure. The rotor-holding compartment, the closing door and the test tube-holding jackets guarantee biological safety in terms of bio-containment, in the event of test tube breakage
- The test tube-holding jackets and rotor are built from thermal, antistatic material that is easy to clean, extract and sterilise in an autoclave at 135°;
- MEDIFUGE is equipped with a decontamination cyclewith UVC reflected light
- Cycl duration 5 minutes at 1,000 revs
- The electronic control engine and its internal parts require no maintenance
- Noise levels fall below the standards required and do not exceed 57 dBa.
- The Medifuge has a wide areas of use, of which Maxillo Facial Surgery, Oral Surgery, Cosmetic Surgery.
Area of use
- Orthopedic surgery;
- Maxillo facial surgery;
- Oral surgery;
- Ophthalmology;
- Cosmetic surgery;
- Sport medicine;
- Dermatology;
- Gynecology;
- Neurosurgery.
Type Medical plasma centrifuge Applications Preperation of Concentrated Growth Factor (CGF) Indications Tissue and bone regeneration for implantology and oral surgery Capacity 8 units (test tubes) Processing Time 12 minutes Power Source 230 V +/- 10% 50/60 Hz Noise Level Don't exceed 57 dB(A) Dimensions of Unit 230 W x 320 L x 240 H mm Weight 9.4 Kg Country of Manufacture Italy
SKU: n/a -
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area Models
Mepinor
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area ModelsMepinor
Indications :
- Periodontal treatments in general.
- Endodontic treatments.
- Short-term Oral Surgeries.
- Apicectomy.
Advantages :
- Free of Methylparaben.
- Provides pulp anesthesia for approximately 60 to 90 minutes and soft tissue anesthesia for approximately 3-5 hours.
SKU: n/a -
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area Models
Mepisv
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area ModelsMepisv
Indications :
- Procedures in children.
- Patients with serious heart diseases, or those in which the use of vasoconstrictors is contraindicated.
- Indicated for hypertensive and asthmatic patients.
- Pregnant patients, especially during the 1st and 3rd trimester.
- Indicated for place orthodontic bands
Advantages :
- Free of Methylparaben.
- Without vasoconstrictor, MEPISV is the safer solution available in the market.
- Long last effect in comparison with Lidocaine plain.
- Provides pulp anesthesia from 20 to 40 minutes and soft tissue anesthesia for 2-3 hours.
- Optimal for use in short-term procedures.
SKU: n/a -
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area Models
Metafil Flo
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area ModelsMetafil Flo
Metafil Flo is a highly-flowable, visible-light-cure, tooth-shade composite resin based on unique monomer combination and containing inorganic fillers and an organic filler which is reactive with the matrix.This feature enables direct injection into the cavity without instrumentation, and gives the finished restoration radio-opacity and wear-resistance.
- Ideal flow consistency
- Excellent polishability
- Low water sorption
- Minimal wear
SKU: n/a -
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area Models
MS Coat One
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area ModelsMS Coat One
MS Coat ONE is a single-bottle dentin tubule sealant. Application of MS Coat ONE is indicated for topical treatment of dental hypersensitivity due to patent dentinal tubules, and will immediately reduce it. Treatment will remain effective for a significant time period.
- Relieve dentin hypersensitivity
MS Coat ONE is designed to relieve hypersensitivity. The unique MS polymer chemically reacts with tooth structure to form a barrier that seals open tubules and blocks thermal, mechanical and chemical stimulation of the odontoblastic process. - Immediate, long-lasting relief
In a clinical study, MS Coat ONE was applied to hypersensitive teeth using a rubbing motion. Sensitivity was then evaluated using a blast from an air-syringe. MS Coat ONE provided immediate relief from hypersensitivity in 99.4% of the cases. 77.4% of the cases remained asymptomatic after 3 years. - Prevent hypersensitivity during tooth bleaching
Simply apply MS Coat ONE before bleaching to prevent post-operative hypersensitivity. The barrier it creates seals the enamel without reducing the bleaching effect and will not subsequently discolor. - Extremely easy to use
The Felt Applicator is designed for access to hard-to-reach subgingival and interproximal areas. Simply saturate the Felt Applicator and gently rub the hypersensitive surfaces.
SKU: n/a - Relieve dentin hypersensitivity
-
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area Models
Natural Look
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area ModelsNatural Look
Photoactivated microhybrid filler composite
Advantages :
- Developed based on nanotechnology.
- Average particle size of 0.5 micron.
- Final texture similar to the natural enamel, which provides imperceptible restorations.
- Minimal polymerization contraction.
- Easiness of handling and sculpture.
- Does not adhere to instrumentals.
- Vita shade guide.
Indications :
- Classes I, II, III, IV and V restorations.
- Direct layers.
- Diastemas Closing.
- Periodontal splinting with fibers.
Shades :
- Enamel A1; A2; A3; A3.5; A4; B2; B3; C2; C3; C4; D3; CL.
- Dentin A2; A3.5; B2; C2.
- Incisal.
SKU: n/a -
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area Models
Nissim Type 1
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area ModelsNissim Type 1
For a more practical training. A Dental Simulator for various “Environment” and “Purpose”.
The dental simulator provides simulation under a more practical situation presuming actual treatment in various training areas such as restorative and prosthetic areas, so that one can acquire precisely controlled techniques. By combining the dental simulator with the wide variety of jaw models that we offer, you can practically and effectively practice dental treatment training with the focus on safety, reliability and quickness.
NISSIM Type 1 is a middle grade simulator whose handling characteristics is equal to NISSIM Type 2 while its functions are somewhat toned down to make it more easier to use. The ears on the NISSIM Head allow face bow training. Also, the magnet change system allows smooth and quick attachment/replacement of jaw models.
- Functionable and affordable middle grade simulator
- For use with FE, D and DP type articulators
- For beginning and intermediate students
- Face-bow training is possible
- Easy-to-use magnet change system
Matching environment Workbench Dental chair Stand Alone –
SKU: n/a -
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area Models
Nissim Type 2
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area ModelsNissim Type 2
For a more practical training. A Dental Simulator for various “Environment” and “Purpose”.
The dental simulator provides simulation under a more practical situation presuming actual treatment in various training areas such as restorative and prosthetic areas, so that one can acquire precisely controlled techniques. By combining the dental simulator with the wide variety of jaw models that we offer, you can practically and effectively practice dental treatment training with the focus on safety, reliability and quickness.
NISSIM Type 2 is a high grade simulator equipped with a mean value articulator which allows various jaw movement functions. By equipping ears on the NISSIM head, it is possible to practice more complicated training presuming face bow transfers. Also, the use of magnet change system allows easy attachment of jaw models, thus improving its handling characteristics when attaching/removing jaw models
- High grade simulator with various occlusal and jaw movement functions
- Offers more lifelike jaw movement compared to Type 1
- For advanced pre-clinical students
- Face-bow training is possible
- Easy-to-use magnet change system
Matching environment Workbench Dental chair Railing storage Stand alone
SKU: n/a -
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area Models
Nissim Type 3
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area ModelsNissim Type 3
For a more practical training. A Dental Simulator for various “Environment” and “Purpose”.
The dental simulator provides simulation under a more practical situation presuming actual treatment in various training areas such as restorative and prosthetic areas, so that one can acquire precisely controlled techniques. By combining the dental simulator with the wide variety of jaw models that we offer, you can practically and effectively practice dental treatment training with the focus on safety, reliability and quickness.
NISSIM Type 3 is a super high grade simulator with various occlusal and jaw movement functions. Adjustable occlusal function that offers more life like jaw movement compared to Type 2. Recommended for instructors of clinics and courses. Face-bow training is possible. Easy to use magnet change system
SKU: n/a -
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area Models
NobelActive
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area ModelsNobelActive
NobelActive – an implant like no other
The unique implant design for high primary stability and esthetic excellence
Excellent primary stability
NobelActive is truly an implant like no other. No matter if you're dealing with soft bone, extraction sockets, or the esthetic region, you can benefit from its high primary stability. This makes NobelActive a suitable choice for demanding indications and protocols, such as immediate implant placement and Immediate Function.
Experience high primary stability even in demanding situations
NobelActive's expanding tapered implant body condenses bone gradually while the apex with drilling blades enables a smaller osteotomy.10 These features help to achieve high primary stability in demanding situations, such as soft bone or extraction sockets. NobelActive enables immediate implant placement and Immediate Function where it might otherwise be challenging
Aim for excellent esthetics
In the end, it's all about the final result. NobelActive's back-tapered coronal design and built-in platform shifting are designed to optimize bone and soft tissue volume for natural-looking esthetics.
Adjust your implant position during placement
Reverse-cutting flutes with drilling blades on the apex enable experienced clinicians to adjust the implant position during placement for an optimized restorative orientation, particularly in extraction sites.
Experience a strong conical connection
The internal conical connection with hexagonal interlocking offers high mechanical strength.14 This helps to ensure the necessary stability of the restoration for a predictable result.
Place implants in areas with limited space
NobelActive 3.0 is specifically designed for narrow space situations, such as lower incisors, where conventional implants previously could not be placed.
Achieve a natural molar emergence profile
You can now also benefit from NobelActive's unique design in the posterior region. The new Wide Platform (WP) implant is specifically designed for posterior cases that require a wider base. It helps create a natural-looking emergence profile for the molar crown, and its shorter implant body (7mm) helps to avoid critical anatomical structures.
Enhanced osseointegration
NobelActive features our unique oxidized TiUnite surface. It maintains high stability during healing through fast bone formation and promotes long-term success.
Lifetime warranty
NobelActive is covered by a lifetime product warranty.
SKU: n/a -
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area Models
NobelActive 3.0
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area ModelsNobelActive 3.0
Narrow space solutions – NobelActive 3.0
Safe implant placement in areas with limited space
The implant for narrow spaces
NobelActive 3.0 is ideal for areas with limited space, such as missing lateral incisors. It provides the high implant strength that is usually difficult to achieve with small diameter implants. Tests indicate superior fatigue and torque strength compared to other 3.0 mm implants on the market.
Place implants safely in areas with limited space
We designed the NobelActive 3.0 specifically for narrow space situations where you previously wouldn't have been able to place a conventional implant. With NobelActive 3.0, you're able to treat single-unit maxillary lateral incisors as well as mandibular lateral and central incisors.
Get peace of mind – safe clinical solution
Narrow diameter implants (Ø < 3.5 mm) allow you to safely and predictably treat situations where traditional diameter implants would increase the clinical risk. That could, for example, be indications with minimal hard tissue and limited space. The clinical performance of narrow implants has been validated in several studies with follow-up of up to seven years. Results show an overall survival rate of 97.3% after five years, proving that narrow implants present a safe clinical solution.
High fatigue strength
The fatigue strength of NobelActive 3.0 with an Esthetic Abutment has been tested according to ISO Standard 14801:2007, with an achieved strength of 160N. The Brånemark System NP implant, which has been in clinical use with very low complication rates since 1996, has a corresponding strength of 178N. As NobelActive 3.0 has restricted indications compared to the Brånemark System, it will be subjected to lower loads.
In comparison, fractures occurred at much lower load levels with narrow diameter implants from other manufactures.
High torque strength
NobelActive 3.0 is designed to withstand more than twice the recommended maximum insertion torque of 45 Ncm. Tests with a torque above 100 Ncm did not damage either the implant, interface or driver.
Enhanced osseointegration
NobelActive 3.0 features Nobel Biocare’s unique oxidized TiUnite surface with grooves (Groovy). This increases implant stability through faster bone formation and ensures long-term success.
Benefit from the unique design of NobelActive
With NobelActive 3.0 you enjoy all the same benefits as the regular NobelActive implant.
Lifetime warranty
NobelActive 3.0 is covered by a lifetime product warranty.
SKU: n/a -
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area Models
NobelDirect 3.0
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area ModelsNobelDirect 3.0
The NobelDirect 3.0 implant encompasses the osseous component and restorative component in one piece. This design is based on the One-Stage Placement concept and offers a number of possible advantages :
- New indications : NobelDirect 3.0 is the first FDA-cleared implant on the market with a diameter of 3.0 mm. For the first time the mandibular central and lateral incisors or maxillary lateral incisors can be restored with an excellent esthetic outcome.
- Ease-of-use : The NobelDirect 3.0 implant is a threaded one-piece implant with an integrated abutment designed for one-stage surgical procedures and cemented restorations.
- Tissue friendliness : The surgery is performed only once, allowing the soft tissue to adapt to the implant / abutment interface without further manipulation.
- Esthetics : The abutment can be prepared to an optimized adaptation to the gingival margin
- The TiUnite surface on NobelDirect 3.0 : Due to a more rapid formation and greater amount of bone to implant contact during healing, Nobel Biocare's Ti-Unite® surfaced implants result in faster and stronger osseointegration and better maintenance of the initial implant stability than machined titanium implants.
Treatment Planning
Indication for use
The diameter of two-piece implants is limited due to the lesser strength of the hollow implant body and the screwjoint. The one-piece design overcomes this limitation and allows us to offer a special small diameter implant – NobelDirect 3.0. This implant is intended for use in the tight space challenges in the region of the mandibular central and lateral incisors and maxillary lateral incisors with a delayed loading protocol.
When the implant is placed it should be restored with a Healing Cap or temporary crown without occlusal loading during the healing time.
Inclusion / Exclusion criteria
The following criteria are recommended for the use of NobelDirect 3.0
- Good gingival / periodontal / periapical status of adjacent teeth
- Favorable and stable occlusal relationship
- No apical disorder / inflammation at the area of the implant site or adjacent teeth
- Good bone volume and density
- No cantilevered restorations
- Angulation requirements of the restoration not exceeding 100
- High initial implant stability
- Controlled loads
The treatment plan should identify and reduce potential load factors such as lateral occlusal contacts, unstable dental occlusion and severe bruxism or other pronounced parafunctions.
Pretreatment Considerations
- The crestal gingiva must be of adequate width if the tissue punch is to be used. In addition, the facial gingiva must also be of an adequate thickness and width to enable sufficient vestibular depth.
- In the presence of an inadequate quantity of gingiva, shallow vestibular depth, and/or frenula pulling, a free gingival graft must be placed at least 3 months before placing the NobelDirect 3.0 implants.
- In the presence of a severely resorbed alveolar ridge, bone augmentation may be required.
Radiographic Examinations
Implant templates that are actual size or magnified 130% or 170% are supplied for NobelDirect 3.0 and used in conjunction with radiographic imaging as a guide to selecting the proper implant to be used. These overlays are to be used as guides only. When more accurate measurements are required, radiographic techniques such as tomograms and computerized tomographic (CT) scans should be utilized.
Additional diagnostic radiographic imaging may be indicated to determine the quality and quantity of alveolar bone or to identify anatomical landmarks.
Implant placement with Flap Reflection
A flap approach is recommended if adequate bone has not been confirmed, if direct vision of anatomic landmarks is necessary or if the facial gingival surface needs connective tissue augmentation.
Implant placement immediately after extraction
The healing capacity of an extraction site is excellent and, as long as the initial stability is reached, implant therapy is well suited to extraction sites. In addition to the above criteria, careful removal of any soft tissue and / or infected tissue is required. If periodontitis is the cause of the extraction, healing before implant treatment is often the procedure of choice.
The following steps are recommended for placement at time of extraction :
- Carry out gentle extraction, where possible keeping the labial bone plate intact
- Carefully remove remnants of any soft tissue from the socket
- Select the length of the implant so its apical end extends beyond the extraction socket
- Using the drills and drill guide, align the preparation as it should ideally be, independent of the direction of the tooth root/extraction socket
- Make optimal use of the interproximal walls for stability
- For immediate placement after an extraction, ensure that the gap between the implant and the bone wall is as small as possible
- Ensure that soft tissue closure around the implant is complete, as this is essential. Vestibular incisons may be required
Flapless Implant Placement
Flapless surgery is indicated in situations where adequate bone and attached gingiva are present, as well as sufficient vestibular depth.
Note: Available bone and significant anatomical landmarks such as blood vessels, nerves and concavities have to be confirmed with conventional diagnostic tools such as radiographic imaging, probing and palpation.
SKU: n/a -
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area Models
NobelRaeplace Select
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area ModelsNobelRaeplace Select
NobelReplace Select- one implant system for all your needs
The well-established and easy-to-use implant system with four options for high treatment flexibility
The original tapered implant
NobelReplace and the original tapered implant Replace Select mimic the shape of a natural tooth root. They are designed for high initial stability in all loading protocols, including Immediate Function.
Experience the highly tactile feel
The easy-to-use connection has three interlocking channels for secure and accurate abutment placement.
Simplify treatment with a straightforward surgical protocol
The surgery kit has a step-by-step drilling protocol and all components are consistently color-coded. This simplifies site preparation and ensures a predictable outcome.
Achieve high initial stability even in compromised bone
The original tapered implant mimicking the shape of a natural tooth root is designed for high initial stability. NobelReplace and Replace Select Tapered are ideal for Immediate Function in both extraction sockets and healed sites.
Choose between four options for high treatment flexibility
Cover your clinical needs with only one system. Whatever your patient’s requirements and personal preference, the four implant options ensure total treatment flexibility.
Enhanced osseointegration
NobelReplace and Replace Select Tapered feature Nobel Biocare’s unique oxidized TiUnite surface with grooves (Groovy), which maintains high stability during healing through faster bone formation and ensures long-term success
Lifetime warranty
NobelReplace and Replace Select Tapered are covered by a lifetime product warranty.
SKU: n/a -
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area Models
NobelReplace
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area ModelsNobelReplace
NobelReplace – one implant system for all your needs
The well-established and easy-to-use implant system with four options for high treatment flexibility
The original tapered implant
NobelReplace and the original tapered implant Replace Select mimic the shape of a natural tooth root. They are designed for high initial stability in all loading protocols, including Immediate Function.
Experience the highly tactile feel
The easy-to-use connection has three interlocking channels for secure and accurate abutment placement.
Simplify treatment with a straightforward surgical protocol
The surgery kit has a step-by-step drilling protocol and all components are consistently color-coded. This simplifies site preparation and ensures a predictable outcome.
Achieve high initial stability even in compromised bone
The original tapered implant mimicking the shape of a natural tooth root is designed for high initial stability. NobelReplace and Replace Select Tapered are ideal for Immediate Function in both extraction sockets and healed sites.
Choose between four options for high treatment flexibility
Cover your clinical needs with only one system. Whatever your patient’s requirements and personal preference, the four implant options ensure total treatment flexibility.
Enhanced osseointegration
NobelReplace and Replace Select Tapered feature Nobel Biocare’s unique oxidized TiUnite surface with grooves (Groovy), which maintains high stability during healing through faster bone formation and ensures long-term success
Lifetime warranty
NobelReplace and Replace Select Tapered are covered by a lifetime product warranty.
SKU: n/a -
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area Models
NobelReplace Conical Connection
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area ModelsNobelReplace Conical Connection
NobelReplace Conical Connection – proven stability, high esthetics
The implant system that combines the proven tapered implant body with a tight sealed connection
An esthetic solution for all indications
NobelReplace Conical Connection merges the original tapered implant body with a tight sealed conical connection, offering you and your patients an esthetic solution for all indications. The implant body mimics the shape of a natural tooth root, ensuring high initial stability for all loading protocols, including Immediate Function.
Experience the strong sealed connection
The implant-abutment interface is crucial for a long-lasting functional and esthetic result. The internal conical connection offers a tight seal and high mechanical strength.8 This gives the restoration the stability required for a predictable result.
Deliver a natural-looking esthetic result
Soft tissue volume is key to an esthetic result. The built-in platform-shifting feature provides a small ridge on which soft tissue can develop. This increases soft tissue volume and ensures a natural-looking result.
Achieve high initial stability, even in compromised bone
The original tapered implant, NobelReplace, mimics the shape of a natural tooth root. Designed for high initial stability, it's ideal for Immediate Function in both extraction sockets and healed sites
Simplify the treatment with a straightforward surgical protocol
The surgery kit has a step-by-step drilling protocol and consistently color-coded components. This simplifies site preparation and ensures a predictable outcome.
Choose between two collar options
Depending on your clinical need and treatment preference, you have the choice between NobelReplace Conical Connection with TiUnite on the collar or NobelReplace Conical Connection PMC with 0.75 mm machined collar.
Enhanced osseointegration
NobelReplace Conical Connection features Nobel Biocare’s unique oxidized TiUnite surface with grooves (Groovy). TiUnite maintains high stability during healing through faster bone formation, helping to ensure long-term success
Lifetime warranty
NobelReplace Conical Connection is covered by a lifetime product warranty.
SKU: n/a -
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area Models
Nu Alloy ® Dp
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area ModelsNu Alloy ® Dp
Dispersed-phase : A mixture of lathe-cut irregular particles and atomized spherical particles.
High-copper-content: >12%.
Nu Alloy® dp is a single composition alloy with absolute homogeneity of its particles.
Thanks to its optimal chemical composition (45%Ag, 31%Sn, and 24%Cu) and its high copper content, the gamma-2 phase is eliminated from the alloy microstructure. As a result of this, fragility and instability problems in corrosive environments decrease.
Its morphology is composed of atomized and lathe-cut particles which results in a fast amalgamation with its optimal 50% mercury content (Mercury-to-alloy ratio : 1:1) and improves the alloy’s physical and mechanical properties.
This alloy has a high resistance to marginal fractures, excellent adaptation and marginal sealing, thanks to the homogeneity of its particles.
Fine surface finish originated in the granulometry of its spherical and prismatic particles.
SKU: n/a -
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area Models
Nu Alloy ® Dp Active
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area ModelsNu Alloy ® Dp Active
Nu Alloy ® dp Active is a unique or simple composition alloy, which guarantees absolute chemical homogeneity of their particles. Thanks to ideal chemical composition (45% Ag, 31% Sn and 24% Cu), eliminating the presence of gamma-2 phase of the microstructure of the amalgam due of the high copper content. This reduces the problems of fragility and instability in corrosive environments.
SKU: n/a -
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area Models
Operative Jaw Model (32 teeth) [CON2001-UL-SP-FEM-32]
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area ModelsOperative Jaw Model (32 teeth) [CON2001-UL-SP-FEM-32]
- Basic yet comprehensive training model
- Soft type replaceable gingiva – 2 types to choose from (pink, pink for silicone impression taking)
- A wide variety of operative training is possible
- A wider facial gingival area compared to the PRO2001 allows you to practice various operative techniques
SKU: n/a -
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Operative Area Models
Operative Jaw Model (32 teeth) [CON2001-UL-UP-FEM-32]
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Operative Area ModelsOperative Jaw Model (32 teeth) [CON2001-UL-UP-FEM-32]
- Basic yet comprehensive training model
- Soft type replaceable gingiva – 2 types to choose from (pink, pink for silicone impression taking)
- A wide variety of operative training is possible
- A wider facial gingival area compared to the PRO2001 allows you to practice various operative techniques
SKU: n/a -
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area Models
OroCup Care System
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area ModelsOroCup Care System
Available as: 2 litre care system
User-friendly, enclosed care system for the aspiration of ready-to-use solutions of Orotol® plus, Orotol® ultra, and MD 555 cleaner.
- Robust and stable design
- Simple, user-friendly and versatile
- Connection adapters for all suction hoses
- Enables logical working methods and low levels of effort
- Creates an air/water mix for the moistening and highly effective cleaning of the suction system
SKU: n/a -
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area Models
Orotol Plus
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area ModelsOrotol Plus
Active ingredients : QAC
Foam-free and highly efficient liquid concentrate for the simultaneous disinfection, deodorization, cleaning, and care of all suction systems and amalgam separators.
- For suction units, recommended by leading unit manufacturers
- No germ resistance development
- Proven material compatibility
- Maintains the value of the suction unit
- Dissolves and disinfects bio-film and prevents the formation of sludge (blood and proteins)
- Long-lasting effect
- Broad range of effectiveness
SKU: n/a -
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area Models
Orthomite LC
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area ModelsOrthomite LC
Orthomite LC is a light-cure adhesive resin for orthodontic bonding of metal, ceramic and plastic brackets to tooth surface. Through the innovative design of the base monomer, Orthomite LC Paste can bond to etched enamel well without priming.
Easy to Use, Time-Saving
Through the innovative design of the base monomer, Orthomite LC Paste can bond to etched enamel well without priming.
SKU: n/a -
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area Models
OsseoSet 200
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area ModelsOsseoSet 200
OsseoSet™ 200 SI-915, 115V,Complete drill solution – OsseoSet 200 with a broad range of accessories for implant and prosthetic treatments,Safe treatments – High performance drilling and precise torque control,Superior handling – Separate programs and ergonomic foot control.
Complete Drill Solution optimized for implant treatments and prosthetics. Torque release function enables safe and easy treatments. Designed for 20:1 and contra angled and 1:1 straight handpieces Motor is sterilizable and maintenance free. Unused but without original manufacturer packaging. Enables internal and/or external irrigation.
SKU: n/a -
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area Models
Osstell ISQ
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area ModelsOsstell ISQ
One of the most important factors for a successful implant treatment outcome is the stability of the implant. Osstell instruments make it possible to monitor osseointegration in a precise and objective manner.
SmartPeg
The SmartPeg is used together with the measurement instruments Osstell IDx or Osstell ISQ. Both instruments measure the resonance frequency of a SmartPeg, when it is attached to an implant.
The SmartPegs are single use items. To avoid damage to the implant, the SmartPeg material is quite soft, which limits the lifetime of the threads.
SKU: n/a -
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area Models
Osteo Safe
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area ModelsOsteo Safe
UNIQUE !
Osteo Safe®* is indicated for crestal approach sinus lifts and bone condensation in the upper jaw. This unique solution ensures comfort for the patient and improved stress management, providing the practitioner with a perfectly executed, reproducible movement that is 100% effective.
- OSTEO SAFE® provides enhanced safety and comfort for the patient, resulting in better treatment acceptance.
- Greater peace of mind for the practitioner with OSTEO SAFE®. The controlled impaction achievable for this delicate procedure allows for minimally invasive and totally safe bone preparation.
- OSTEO SAFE® ensures precision and saves time. The simple, short and progressive sequence of 4 diameters of osteotomes means that AXIOM® implants can be placed during the same surgical procedure.
- OSTEO SAFE® can be held in one hand, offering enhanced visibility during surgery and allowing the practitioner to fully focus on the surgical procedure.
- OSTEO SAFE® is unique as it is the first pre-calibrated impaction instrument that connects directly to a micromotor.
- A free tailored programme has been developed for Anthogyr IMPLANTEO® surgical motor owners.
- Sold as a complete kit in its surgical sterilisation cassette containing, 16 osteotome inserts (straight and bayonet, concave and convex insert tips), 1 manual screwdriver and accessories (mandrel and mandrel extension).
SKU: n/a -
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area Models
P3-Cart
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area ModelsP3-Cart
The elegant P3-CART treatment cart requires no installation and is totally mobile. The instruments can be freely selected and are fully efficient even with continuous operation. To use the P3-CART simply insert the power plug! The P3-CART is equipped with two spray water tanks. If a spray water tank becomes empty, you can change to the second tank with a switch, continuing your treatment without interruption. A switch allows you to use water from the spray water bottles or from an external source. The oil-free compressor of the P3-Cart enables to work throughout the day without interruption and is distinguished by its remarkably quiet operation (48 dB!).
Features :
- Autonomously functioning cart with integrated silent oil-free compressor and spray water tanks
- High quality stainless steel housing
- 1 Three-way syringe (air/water/spray) with sterilisable tips
- Integrated spray water system for syringe and instruments (check valve prevents the back flow of water)
- 4 instrument hoses with light (6-hole connector)
- Instrument hoses detachable
- Spray adjustment regulators for each instrument
- Foot control with spray on/off function and chip
Air consumption instruments 35-55 l/min Operating pressure 2.5-3.5 bar Each instrument is individually adjustable 2 Spray water tanks 2 x 1 litres Total weight approx. 40 kg Dimensions 470 x 440 x 75 mm Integrated compressor Capacity 75 l/min at 4 bar; Max. pressure: 8 bar; Sound pressure level: 48 dB; Compressed air tank: 4 litres
SKU: n/a -
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area Models
Peri-Resin II
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area ModelsPeri-Resin II
Only this resin which can make border molding and sealing of dentures
Because of its thixotropic character, border molding is easy in the early polymerizing stage.
As Peri-Resin is not sticky, so you can shape the border easily with wet fingers.
After extending and correcting the shape of peripheral edge of denture base, mucous surface might be lined using lining material such as DIL.
Contents Powder 70 gr, liquid 50 mL, New top coat 6 ml, Syringe 2 Colors Pink
SKU: n/a -
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area Models
Perossal
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area ModelsPerossal
Nanocrystalline calcium phosphate calcium sulfat matrix
Perossal® is a unique, synthetic, osteoconductive and resorbable bone graft substitute. Perossal® is a composite of nanocrystalline hydroxyapatite and calcium sulfate. The nanocrystalline hydroxyapatite gives perossal® a very high specific surface which allows proteins and growth factors to bond directly on the surface and results in controlled osteostimulation of the surrounding tissue. The nano- and micro-porous network of perossal® offers the possibility to load the bone graft substitute individually with liquids (e.g. antibiotics) and provides the property of a controlled prolonged release. perossal® permits guided bone regeneration together with the stabilization of the alveole or extraction socket.
Art.-No. Perossal® Synthetic Alveo Cones Dimensions Content Volume 03-01031 Ø 6 mm, 6 mm Height 1 x 6 Pieces / Cones 1.2 ml 03-01032 Ø 6 mm, 6 mm Height 2 x 6 Pieces / Cones 2.4 ml
SKU: n/a
![Operative Jaw Model (32 teeth) [CON2001-UL-SP-FEM-32]](http://dental.bintangsaudara.com/wp-content/uploads/2021/04/product_1_10-12-2018-1544434171-300x300.jpg)
![Operative Jaw Model (32 teeth) [CON2001-UL-UP-FEM-32]](http://dental.bintangsaudara.com/wp-content/uploads/2021/04/product_1_10-12-2018-1544434622-300x300.jpg)
