Shop
Showing 1171–1200 of 2509 results
-
Equipment / Dental Unit / X-Ray / Etc, Micromotor
iOptima
Productivity is a Purpose.
The iOptima reaches new altitudes in practice productivity by seamlessly integrating performanceenhancing technologies into an uncomplicated experience. Equipped with Bien-Air’s best-selling brushless micromotors and more innovations than any other retro-fit systems in its class, the iOptima effortlessly takes the pole position for the future of electric power dentistry. See what it’s like to operate at the next level.
Interface – Restorative & prophylaxis procedures ????/td> Torque control – Endodontics procedure (auto-reverse & auto-forward) – Motor compatibility MX2 LED Speed range 100 -40’000 rpm Warranty 2 to 3 years 1 Motor specifications MX2 LED Type Brushless, internal spray Max torque 3.5 Ncm Weight (g) 90 g Dimensions Ø 21mm x 50mm Led light ????/td> Life-time lubricated ball bearings ????/td> Sterilisable without protection ????/td> Hose mounting/rotation Screw/±200º Warranty 3 to 4 years2 1 2-year standard warranty and 1-year optional warranty available through Bien-Air’s PlanCare extended warranty program.
2 3-year standard warranty and 1-year optional warranty available through Bien-Air’s PlanCare extended warranty program.
SKU: n/a -
Endodontic Instrument / File, Endodontics, Rotary File
IRace
Root canal preparation and retreatment.
Thanks to their exclusive characteristics, only three iRace NiTi rotary instruments are needed to treat the majority of cases (straight, slightly curved or wide canals). The iRace sequence allows preparation up to a diameter of ISO 30/.04. With its ease of use and manipulation, it results in considerable time savings.
- 3 instruments: R1 15/.06, R2 25/.04 and R3 30/.04
- Lengths: 21, 25, 31 mm
- Recommended speed: 600 rpm
- Torque: 1.5 Ncm
SKU: n/a -
Endodontics, Irrigation Needle
Irrigation Needle
Feature :
- Thin Wall
- Two lateral vents
- Closed front-end
- Rounded tip
- Free of burrs
- Double side Port Needle tips
FANTA DENTAL IRRIGATION NEEDLESÂ with 2 lateral vents for gentle but effective irrigation of the root canal. Special design allow to irrigate safely full length of the canal. This thin walled needle is designed to improve flow rate, to offer better irrigation and to provide more flexibility.
NOTE:
Pay attention to the crystal in flashing fluid to block irrigation needle, washing needle with water or washing plugging needle with ultrasonic. Suitable for curved root canal, pre-bend needle in advance.
SKU: n/a -
Air Turbine High Speed Handpiece, Handpieces
J1
- Super torque cutting
- Air pressure : 0,28Mpa-0,30Mpa,
- Rpm : 280,000-360,000
- Power : 23W
- Noise : < 60 dB
- Diameter Of head : •12,4 mm x H 13,8mm -Bearing: imported ceramic bearing
- Connection : 4 hole
Model TU Adaptor four holes Rotor speed 280000r/min -360000r/min Head height Φ12.4mm X H13.8mm Bur size Handle diameter 1.590mm – 1.600mm Bearing Imported ceramic bearing Sterilization Can be 135????sterilized
SKU: n/a -
Air Turbine High Speed Handpiece, Handpieces
J3
- Built-in air control system, extend the life span
- Quick-stop system, ensure patient safety
- Low noise for hearing protection
- No worry about the burs fly out
- Zero-retraction system, prevent dust impurities enter into
Model SU Rotor speed 350000rpm – 420000rpm Noise ≤60dB Power 21W Air pressure 0.23Mpa – 0.25Mpa Head height Φ11.26mm Radial runout ???0.03mm Chuck Type Push Button
SKU: n/a -
Air Turbine High Speed Handpiece, Handpieces
J4
- Mini head provides more flexible operation
- Equipped with professional short shank diamond burs for children’s teeth
- German imported bearing is adopted
Model MU Rotate speed 350000-500000rpm Noise ≤65dB Power 14W Water Flow 90-110ml/min Air Pressure 0.23-0.25 Mpa Diameter of Head (mini head) 8.9 mm Chucking Type Push Button
SKU: n/a -
Air Turbine High Speed Handpiece, Handpieces
J45
- The J45 dental handpiece uses a rear exhaust design. The exhaust port is designed on the back of head with 100% no air blowing on the front, thus avoiding any potential postoperative complications. This handpiece is especially suitable for bone removal, including the cutting and separating of deep, impacted teeth.
- Slighter vibration, effectively preventing the risk of medical accident caused by bur breaking
J45 dental handpiece vibrates in very small degree during high speed rotation, effectively avoiding bur breaking, thus avoiding the risk of surgical complications. - The rotational speed is stable and there is no high pressure air flow under the handpiece head. That means the dental handpiece can be used for minimally invasive tooth removal, and is also commonly used for more extensive procedures.
- The use of an anti-suction system can prevent the suction of blood, virus and skin particles caused by negative pressure produced when handpiece stops operating, so that cross infection can be avoided. This also better protect the dental cartridge to avoid the damage of foreign matter to bearing, largely improving the service life of handpiece.
Model MU Rotate speed 330000-420000rpm Coupling Type Midwest M4 Head Diameter ⌀ 11.25 mm x H13.5 mm (standard head) LED No Air Pressure 0.28-0.25 Mpa Sterilized Method can be autoclaved no more than 135 degree Applicable Bur Shank diameter 1590 mm – 1600 mm, Length 25 mm
SKU: n/a -
Air Turbine High Speed Handpiece, Handpieces
J5
- Typical double sealed protection.Add special metal made protective casing to cover the sealed LED bead,meanwhile,cover the tip of protection casing with heat resisting transparent gels.The LED bead will 100% withstand the 135 degree high temperature and pressure sterilization,thoroughly solve the industrial difficulties in the frequently damaged in LED durability.
- Zero-retraction system，avoid imqurities,blood and virus suck into the cartridge when the handpiece stops workong,which highly increase the service life of bearingsEquipped with professional short shank diamond burs for children’s teeth
- Solve the problem that no water spray due to too much air pressure.German imported bearing is adopted
- Solve the problem that no water spray due to too much air pressure.
Model MU Rotate speed 300000-350000rpm Noise ≤65dB Power 22W LED Brightness 18000 Lux Color Temperature : 5500 – 6000 K Working Pressure 0.28-0.3 Mpa Sterilized Method 135 degree high temperature and pressure steam sterilization Chucking Type Push Button
SKU: n/a -
Air Turbine High Speed Handpiece, Handpieces
J6
- SMD-LED Smd-led Technology high quality optical fiber lighting, the use of imported materials, independent research and development of the lighting system, can withstand high temperature and high pressure repeated disinfection, LED lights compared to white burning lamp, halogen lamp more stable, longer service life
- Unique chip design and smd-led technology to completely solve the light cell phone Deng and stroboscopic industry problems, through the laboratory data show, smd-led technology SMD lamp can be sterilized 1200 times, can continue to work for 1000 hours lighting
- Equipped with independent research and development of “automatic locking compression shaft core” Built-in precision miniature spring, with the mobile phone high-speed rotation, micro-spring on the clamping force to apply preload, so that the needle more and more tightly, to ensure the use of the process does not fly needles
- Germany bearing speed is stable, so that the mobile phone jitter coefficient to minimize, so that the diagnosis and treatment of teeth to achieve smooth and smooth effect
- Three-point water injection mode for cooling, ultra-precision water injection provides the best cooling effe
- The sanitary head system is built inside the turbine heads to effectively prevent the change of pressure caused by the stop working to cause blood, virus and other foreign bodies to enter the phone through the nose
- One nose, more fall-free, no solder joints, impurities easy to dredge, rust is not easy to block water, reduce the problem such as poor atomization
Model MU Rotate speed 300000-350000rpm Noise ≤60dB Power 22W LED Brightness 15000 Lux Color Temperature : 5500 – 6000 K Air Pressure 0.28-0.3 Mpa Sterilized Method 135 degree high temperature and pressure steam sterilization Chucking Type Push Button
SKU: n/a -
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area Models
Jason Fleece
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area ModelsJason Fleece
Jason® fleece is a pH-neutral, wet-stable fleece made of native collagen with a highly efficient hemostatic effect. The well-known effect of collagen is induced by the adhesion of platelets to the collagen fibrils.
As a consequence, platelets aggregate and release coagulation factors by degranulation. This initiates the coagulation cascade that leads to hemostasis.
Jason® fleece promotes the formation and stabilization of the blood coagulum and can be applied for wound protection and to support wound healing (i.e., biopsy harvesting sites, coverage of augmentation sites). Jason® fleece is completely resorbed by the body’s own processes within two to four weeks. Jason® fleece is also available preloaded with Gentamycin (Jason® G).
Art.-No. Jason® Fleece Size Content 690412 20 × 20 mm 12 pieces 692510 50 × 50 mm 10 pieces Art.-No. Jason® G Gentamycin preloaded collagen fleece Size Content 600612 25 × 25 mm 12 pieces (single sterile units)
SKU: n/a -
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area Models
Jason Membrane
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area ModelsJason Membrane
Jason® membrane is a native collagen membrane obtained from porcine pericardium, developed and manufactured for dental tissue regeneration. Its long-lasting barrier function is the basis for predictable treatment success.
Due to the unique patented production process, the superior biomechanical properties of the native pericardium are preserved. The collagen structure (with an increased content of collagen type III) ensures a long-lasting barrier function. Moreover, Jason® membrane is characterized by an easy handling, excellent surface adaptation, and a remarkable tear resistance. Based on these properties, this membrane is the first choice particularly for larger augmentative procedures.
Art.-No. Jason® Membrane Size Content 681520 15 × 20 mm 1 membrane 682030 20 × 30 mm 1 membrane 683040 30 × 40 mm 1 membrane
SKU: n/a -
Dental Simulator Education, Dental Training Products, Prosthetic Dentistry, Stomatognathic Function Area Models
Jaw Function Skull Model [ANA1001-T]
Dental Simulator Education, Dental Training Products, Prosthetic Dentistry, Stomatognathic Function Area ModelsJaw Function Skull Model [ANA1001-T]
- 3-dimensionally reproduces various mandibular jaw movements such as protrusive, lateral and vertical movements
- 4 cylinders representing the temporal and masseter muscles are attached to the skull model
- By observing 3-dimensionally instead of using 2-dimensional tools such as illustrations, you can understand mandibular jaw movements much easier
SKU: n/a -
Handpieces, Implant Handpiece
Jinme 20 : 1
High torque implant handpiece with minimal vibration
- Appearance and material : chrome coating and stainless steel material
- Chucking type : push button
- Cooling device : external water spray
- Illumination source : fiber optic
- Coupling : E type
- Bur : ISO1797-1 ø2.35 Surgical bur (1 type)
- Gear ratio : 20:1
- Max speed : 2000 rpm/min
- Noise : 48dB
- Weight : 71.5 gr ± 0.5 gr
- Illumination : 10.000 Lux ± 10%
- Vibration of testing bur : 0.035 mm
- Maximum dynamic torque (under 100 rotation) : 80 N.cm
SKU: n/a -
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area Models
Join Champ ZC – S300
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area ModelsJoin Champ ZC – S300
ZC – S300 computer controlled integral Dental Unit, is made of wish lower-voltage DC motor and nitrogen spring drive & balance system, to have stable operation and super low noise. Turnable luxurious toughened glass cuspidor is convenient for the patient to rinse the mouth and spit, built-out injecting water purified system can prolong the use life of handpiece, the interlock design between the dental unit and the chair enables the operating safer. Full electric motor, emergency motor, emergency stop, adjustable head rest.
SKU: n/a -
Dental Unit / Chair
Join Champ ZC – S300 New Model
A comfortable, relaxed patient is always a plus whatever the working situation is. So, we take the curvature of human back into consideration when making the backrest to make it very close to the patient’s back during work, thus bringing extra comfort to the patient.
Our dental chair package is steady and quite assuring due to its floor type structure, and the patient won’t be anxious during dental surgery. This is very meaningful for the perating personnel.
SKU: n/a -
#N/A
Join Champ ZC – S400
Meticulous care to patient, the chair performs horizontal compensatory movement when the backrest moves, compensation level is 12cm, completely remove patient’s embarrassed status, to be more comfortable and easy. Triunity design of tissue box, tray and cup holder embodies Ergonomics concept: more care to patient.
SKU: n/a -
Burs / Diamond / Carbide / Steel, Dentistry, Kits
JOTA Polisher Kit, 3 step” For Ceramic 1399
Kits for dental surgeries
1399 JOTA Polisher Kit „3step“ for Ceramic Fig Shank ISO Color Ø Right Angle 9812G RA 803 204 243 534 – 040 9813G RA 803 204 030 534 – 060 9814G RA 803 204 304 534 – 100 9812M RA 803 204 243 524 – 040 9813M RA 803 204 030 524 – 060 9814M RA 803 204 304 524 – 100 9812F RA 803 204 243 514 – 040 9813F RA 803 204 030 514 – 060 9814F RA 803 204 304 514 – 100 Content 1 1 1 1 1 1 1 1 1
SKU: n/a -
Burs / Diamond / Carbide / Steel, Dentistry, Kits
JOTA Silicon Polisher Kit for Ceramic 1395
Kits for dental surgeries
1395 JOTA Silicon Polisher Kit for Ceramic Fig Shank ISO Color Ø Right Angle 9133G RA 658 204 243 524 – 050 9134G RA 658 204 030 524 – 070 9133M RA 658 204 243 514 – 050 9134M RA 658 204 030 514 – 070 9133F RA 658 204 243 504 – 050 9134F RA 658 204 030 504 – 070 Content 1 1 1 1 1 1
SKU: n/a -
Injector, Laboratory, Laboratory Equipment
JP90 Handheld Injector
The JP90 Handheld Injector and JP90 Flask were designed to work in conjunction with the TCS Digital Furnace to inject thermoplastic clasps, 1-3 teeth unilaterals and up to 5 teeth saddles. Using this handheld injector completely eliminates the need to flask the case using the traditional method, saving time and money.
Injects: Clasps, 1-3 tooth unilaterals, up to 5 consecutive tooth partials/saddles, saddles for combination cases, and repairs
- Lightweight
- Compact
- Minimal maintenance
- JP Bullets (cartridges) available in Unbreakable™, iFlex™, & Karadent™
- Used in conjunction with the TCS Digital Furnace or similar furnace
- Made in-house in the USA
SKU: n/a -
Endodontic Instrument / File, Endodontics, Hand File
K Files
Glide Path.
K (Kerr) files. K-Files are particularly well adapted for probing and permeabilization during canal preparation. Made of stainless steel or NiTi, K-Files are more rigid instruments than reamers and thus more effective at penetration.
- Ø ISO 6, 8, 10, 15, 20, 25, 30, 35, 40 (NiTi/Sst)
- Ø ISO 45, 50, 55, 60, 70, 80 (Sst)
- Lengths: 21, 25, 31 mm
- Taper: 2%
SKU: n/a -
Endodontic Instrument / File, Endodontics, Hand File
K-File
Endodontic Stainless Steel Hand Files
- Root canal cleaning and shaping instruments
- Offers superior cutting efficiency on insertion and withdrawal and procession handling
- Ergonomic color coded handle provides comfort and excellent tactile feedback
- Available in sizes 8 through 80 and 21mm, 25mm & 31mm lengths
K-Files
- Designed to clean and shape root canals
- Produced to give operators a smooth tactile sense inside the canal during instrument
SKU: n/a -
Acrylics / Resin, Laboratory, Laboratory Material
Karadentâ„¢
Karadent™ by tcs® is a semi-rigid, microcrystalline polymer thermoplastic. Karadent™ is your ideal upgrade from acrylic dentures offering the stability and simplicity of acrylic/metal partials without compromising aesthetics. Ideal for full dentures, semi-flexible partial dentures, clear clasps, framework, and nightguards.
Choose Karadentâ„¢ for modern, lightweight, and durable dentures.
SKU: n/a -
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area Models
Kenda C.G.I.
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area ModelsKenda C.G.I.
KENDA C.G.I
- 3-step polishing system
- For universal composite, compomers and glass-ionomers
- The C.G.I polishing system contains specific polishers in 3 grades for contouring, finishing and polishing.
Order REF 905-C 908-C 909-C 910-C 905-M 908-M 909-M 910-M 905-F 908-F 909-F 910-F Size Ø X L mm 6,5 X 10 5 X 10 10 X 1 9 X 8,5 6,5 X 10 5 X 10 10 X 1 9 X 8,5 6,5 X 10 5 X 10 10 X 1 9 X 8,5 ISO No. 638 204 030 532 060 638 204 243 532 050 638 204 303 532 100 638 204 030 532 090 638 204 030 512 060 638 204 243 512 050 638 204 303 512 100 638 204 030 512 090 638 204 030 492 060 638 204 243 492 050 638 204 303 492 100 638 204 030 492 090 Grit Coarse Medium Ultra Fine Color Whitish White Green Pink Torque 7500 RPM 3000 – 7500 RPM 3000 – 7500 RPM
SKU: n/a -
Handpieces, Implant Handpiece
Kirschner/Meyer CA 20:1 L
Thanks to the exceptionally ergonomic design of the Bien-Air 20:1 L Micro-Series implantology contra-angle, the word ‘comfort’ takes on a whole new meaning.
This contra-angle has an irrigation system which is internal to the instrument – a world first. So your grip is not impeded by the irrigation line. The jet of physiological liquid is projected onto the drill shaft itself, providing perfect cooling, particularly when using implant guides for insertions.
In addition, its shafts and gears are machined in stainless steel with high resistance to corrosion.
The Micro-Series 20:1 L contra-angle handpiece abounds with qualities: its small head, exceptional DuaLook lighting… and it is also the shortest and lightest contra-angle on the market. The benchmark in implantology instruments.
Micro-Series
The Bien-Air Micro-Series brings together the Bien-Air series of compact contra-angles and handpieces and its micromotors with LED light. Lighter and more compact, the Micro-Series combinations offer exceptional grip and balance.
Dualook
In addition to being robust enough to withstand all conditions, the dualstrand optical glass conductor gives an enveloping, non-dazzling light, clearly showing depth. DUALOOK: the best lighting on the market.
Accu-Chuck
The most precise chuck locking and rotation drive technology in the world. Discover perfectly balanced instruments, with none of the drawbacks of imbalance or vibration. The best of Swiss technology.
Ideal Geometry
Improved accessibility to areas at the rear of the mouth. Bien-Air contra-angles are designed to offer you improved handling, visibility and accessibility to the working area.
Swiss Made
Only the most sophisticated techniques and the best materials allow the best products to be created. Bien-Air products are designed and manufactured in the heart of Watch Valley in Switzerland. After manufacture, Bien-Air products undergo individual testing.
Speed reducing ratio of 20. Optical glass rod light, push-button bur locking, bur shank Ø 2.35 mm. Compatible with the complete range of Bien-Air micromotors. With Kirschner/Meyer removable irrigation system.
SKU: n/a -
Equipment / Dental Unit / X-Ray / Etc, Keplerian Prismatic Loupe, Loupes
KL3 Asynchronous Style
Higher magnification perfect for precise surgical operation. Quality prismatic optics provides a true edge to edge bright image.
Magnification Working Distance Field of View Depth of Field Weight 4.0X 340-500 mm 60-75 mm 80-130 mm 67g 5.0X 340-500 mm 55-65 mm 70-120 mm 67g *Weight measured based on Standard D sport frame
*Standard frame : Ni-alloy frame or D sport frame
*Standard case : Fabric case A
SKU: n/a -
Equipment / Dental Unit / X-Ray / Etc, Keplerian Prismatic Loupe, Loupes
KL4 Synchronous Style
Higher magnification perfect for precise surgical operation. Quality prismatic optics provides a true edge to edge bright image.
Magnification Working Distance Field of View Depth of Field Weight 4.0X 340-500 mm 60-75 mm 80-130 mm 67g 5.0X 340-500 mm 55-65 mm 70-120 mm 67g *Weight measured based on Standard D sport frame
*Standard frame : Ni-alloy frame or D sport frame
*Standard case : Fabric case A
SKU: n/a -
Acrylics / Resin, Laboratory, Laboratory Material
Kooliner
KOOLINER is a hard, chairside reliner that has been formulated for reduced exothermic heat. This product can completely self-cure in the patient's mouth in approxmately 10 minutes.
- Can be cured in the mouth
- Minimizes distortion
- Ensures fit of denture
- Low exothermic heat; 43°C at 2mm thickness
- Increases patient comfort
- Dense, stable and color fast
- Easy to finish and polish
- Can be used to extend denture borders and posterior palatal seal
SKU: n/a
![Jaw Function Skull Model [ANA1001-T]](https://dental.bintangsaudara.com/wp-content/uploads/2021/04/product_1_10-12-2018-1544433033-300x300.jpg)
