MAKE A STATEMENT
UP TO 40% OFF
MAKE A STATEMENT
UP TO 40% OFF
-
Acrylics / Resin, Laboratory, Laboratory Material
Meliodent Heat Cure
Meliodent – Cost-Effective Production Of Dentures
A denture base material designed by Heraeus Kulzer to make technicians working environment safer. By containing only organic pigments. Meliodent is free from cadmium. The surfance of the denture has perfect properties that allows excellent oral hygiene.
The large variety of colours satisfies almost all needs. Whether clear, standard pink or exotic colours – almost all regional colour exceptions can be satisfied. Compared to other products, Meliodent Heat Cure plays a special role as a denture material : it is most probably the only material with such a large variety of colours!
Benefits at a glance :
- Super fine polymer gives a superb flow
- Short dough time 6 minutes at 23°C
- Long working time up to 30 minutes plus (depends on room temperature)
- Economical for use in the dental laboratory
- Unique co-polymer formula
- Broad spectrum of colour shades to suit all patients
- Exceptional smooth surface
Features Benefits Meliodents super-fine polymer gives a superb flow Trial closures may become unnecessary; displaced teeth and raised bite during flasking can be a thing of the past Meliodent has a short dough time 6 minutes at 23°C Allows the busy technician to save time by packing dentures earlier than with other acrylics Meliodent has a long working time up to 30 minutes plus (depends on room temperature) High versatile working – Can be cured using the boiling technique or by any other curing cycle Meliodent is economical priced for use in the dental laboratory A superior product with a competitive edge Meliodent has a unique co-polymer formula This gives exceptional surface and smoothness characteristics. Less plaque build up and superior tissue compatibility means healthier patients
SKU: n/a -
Acrylics / Resin, Laboratory, Laboratory Material
Paladent 20
Dental acrylic for fabrication of full and partial dentures
Paladent 20 – its well-balanced properties make it economical to use and guarantee high-quality dentures at a reasonable price.
Paladent 20 has very good mechanical properties. It can be processed easily without additional equipment. It’s plastic consistency allows the dough to be packed very easily. In addition, it has a very long working time of up to 30 min, allowing the production of several dentures simultaneously.
Paladent 20 has a good colour stability and a low residual monomer. These points guarantee that the patient can wear the denture for many years without any problems. The colours such as R50 veined are excellent colour matches to all other Heraeus Kulzer denture materials while R50 veined allows individual choice of colour, invisible repairs and extensions.
- Long working time up to 30 minutes (depends on room temperature)
- Superiour mechanical properties
- Excellent colour stability and low residual monomer
- Economical for use in the dental laboratory
- Exceptional smooth surface
SKU: n/a -
Acrylics / Resin, Laboratory, Laboratory Material
Meliodent Rapid Repair
Meliodent – Cost-Effective Production Of Dentures
An additional component is Meliodent Rapid Repair, an acrylic used for repairs, with material and colour properties that suit this top quality denture base material perfectly.
- An economical advantage for use in the dental laboratory
- Broad spectrum of colour shades to suit all patients
- Short polymerisation time (ten minutes)
SKU: n/a -
Acrylics / Resin, Laboratory, Laboratory Material
Dentalon Plus
DENTALON® Plus – well-established
Dentalon Plus is a well-established self-curing resin in a powder/liquid combination for the fabrication of temporary crowns and bridges.
- High gloss polish
- High mechanical stability
- Individual colour adaptation possible
- High colour stability due to amine free catalyst system
SKU: n/a -
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area Models
Denture Liner
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area ModelsDenture Liner
Economical lining material with less stimulation, and with hardness same as the denture base
This is the hard lining material with less stimulation and hardens gradually, so that it can be taken out safely even in the case of many undercuts for partial dentures. Also by using attached self-curing accelerator, it can be as hard as the base of denture. Therefore there will be little level difference between the base and lining material at the final polish.
Contents Powder 100 gr, liquid 100 mL, self-curing accelerator 36 gr Colors Pink
SKU: n/a -
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area Models
Denture Soft II
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area ModelsDenture Soft II
Best selling product with outstanding durability
In addition to durability, this conditioner is twice as good as a conventional one, the durability has further increased due to attached surface smoothing material
Contents Powder 100 gr, liquid 80 mL, New top coat 6 mL Colors Pink
SKU: n/a -
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area Models
FD Soft
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area ModelsFD Soft
Acrylic soft lining material as soft as tissue conditioner
Durability is six months to a year by using with a denture cleanser Clean Soft for exclusive use.
A denture cleanser exclusively for soft lining material, “Clean Soft” should be used to prevent a lining surface of the denture from being ruined.
Acrylic soft lining material has many merits;
- an additional lining of denture is possible in the mouth,
- silicon fitting examination can be used,
- little separation from a denture base,
- viscoelastic so has better mastication efficiency than silicon material.
A denture cleanser exclusively for soft lining material, “Clean Soft” should be used to prevent a lining surface of the denture from being
Contents Powder 110 gr, liquid 100 mL, New top coat 30 mL Colors Pink
SKU: n/a -
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area Models
Soft To Hard DIL
Conservative Dentistry, Dental Simulator Education, Dental Training Products, Endodontics Area ModelsSoft To Hard DIL
The world first success in the development.
This functions as tissue conditioner first, then automatically begins self-curing a week after wearing. As it hardens after taking the functional impression, so patients feel comfortable with their denture with less pain. “Polident” with enzyme (denture cleanser) can be used from a week after wearing.
Contents Powder 50 gr, liquid 45 mL, New top coat 30 mL Colors Pink, Fiber Pink
SKU: n/a
-
Handpieces, Low Speed Contra Angle Handpiece
Low Speed Contra Angle 1 : 5
1:5 L Contra Angle with LED 10.000 – 200.000 rpm
Four holes spray
Highly enhance the cooling effectFiber optic
To provide high illumination in the patients’ mouth during treatmentPrecise gear production
Swiss made equipment to guarantee the accuracy of gears100% 1:5 increasing rate
Strong in cutting power and high efficiency5 pcs German bearings
Fantastic performance in torque, vibration, noise, durability and little temperature increasing rate
- Rotation ratio : 1:5
- Connector : Standard E-type connector
- Rotation speed : Up to 200.000 rpm
- Noise : ≤ 60 dB
- Light : Built-in LED
- Water spray : Single
- Chucking type : Push-button type
SKU: n/a -
Equipment / Dental Unit / X-Ray / Etc, Micromotor
E1
E1 Electric Micromotor with LED light 2.000 – 40.000 rpm
Storage Function
It can store speed choice for different dentistsFiber Optic
To provide high illumimation in the patients mouth during treatment6 pcs German Bearing
Fantastic performance in torque, vibration, noise, durability and little temperature increasing rateFour Hole Spray
Highly enhance the cooling effect4 Modes
1:1, 1:5, 16:1, 20:1Precise Gear Production
Swiss made equipment to guarantee the accuracy of gear100% 1:5 increasing rate
Strong in cutting power and high efficiency
SKU: n/a -
Handpieces, Implant Handpiece
Jinme 20 : 1
High torque implant handpiece with minimal vibration
- Appearance and material : chrome coating and stainless steel material
- Chucking type : push button
- Cooling device : external water spray
- Illumination source : fiber optic
- Coupling : E type
- Bur : ISO1797-1 ø2.35 Surgical bur (1 type)
- Gear ratio : 20:1
- Max speed : 2000 rpm/min
- Noise : 48dB
- Weight : 71.5 gr ± 0.5 gr
- Illumination : 10.000 Lux ± 10%
- Vibration of testing bur : 0.035 mm
- Maximum dynamic torque (under 100 rotation) : 80 N.cm
SKU: n/a -
Implant Equipment, Implants
E82
Committed to stress-free healing implant motor
- 8.In oral treatment, the concentration or excessive bone stress around the implant is one of the main f actors affecting the long-term use of the implant.
- JINME implant machine has unique s tress-free healing function, which avoids excessive compression of the bone when screwing the implant into the implant to cause stress to cause bone resorption around the implant, thereby increasing the implant success rate.
Six advanced implanting experience
- Swiss motor, quiet and light , not easy to fatigue
- German bearings, high torque, super smooth and easy operation
- Ultra-low speed, more refined implanting and superior quality
- Real-time display and c onvenient for speed adjustment
- Continuously variable speed, long-stroke pedals are sensitive and c omfortable
- Limit rotation function to prevent compression of bones and ensur e stress-free healing
Swiss motor, quiet and light, not easy to fatigue
The ultra-quiet motor is imported from Switzerland;The noise is less than 40dB; E xtremely lightweight, comfortable to hold, and will not be tired after long-term operation; High CRI (color rendering index) LED light source, natural daylight, adjustable brightness (E80)German bearings, large torque ultra-smooth and easy to operate
German bearings, radial runout ≤ 0.02mm, e xtremely stable operation; The unique gear structure design, can withstand a maximum torque output of 80N·cm; De tachable structure design for easy cleaning and disinfection.Limit rotation function to prevent compression of bones and ensure stress-free healing
The unique limited-value gyration function prevents serious micro-damage of the bone int erface caused by excessive implant torque and affects bone tissue healing. Meanwhile, it prevents excessive compression of the bone when the implant is scr ewed into the bone and c auses bone resorption, and finally achieves stress-free healing of the implant.Ultra low rotation speed for implant to reduce bone trauma
100 rpm，5N·cm-70N·cm;The ultra-low speed of the mo tor is 100 rpm, and the pr ecise torque control of 5N·cm-70N·cm reduces bone trauma. It brings more advantages to prepare cavity for implant system in the maxilla in pretty low speed.Real time display, the parameters can be adjusted quickly and obviously
The interface is simple and intuitive, the tr eatment steps, speed, torque, cooling water adjustment, forward and reverse and other parameters can be displayed and adjusted in real time. The operation is simple and convenient; the appearance is simple and be autiful, and it is e asy to clean without dead spots.Tepless variable speed, long-stroke foot pedal is more sensitive and comfortable.
Metal pedal, stepless speed change, long-stroke design, comfortable and sensitive speed c ontrol. Innovative button design for water source to control water out and stop in no delay. It definitely brings more convenience to avoid the step-by-step foot control to increase and decrease the water flow. IPX6 professional surgical-grade waterproof surface treatment to ensure safety and reliability.
SKU: n/a -
Implant Equipment, Implants
E80
Committed to stress-free healing implant motor
- 8.In oral treatment, the concentration or excessive bone stress around the implant is one of the main f actors affecting the long-term use of the implant.
- JINME implant machine has unique s tress-free healing function, which avoids excessive compression of the bone when screwing the implant into the implant to cause stress to cause bone resorption around the implant, thereby increasing the implant success rate.
Six advanced implanting experience
- Swiss motor, quiet and light , not easy to fatigue
- German bearings, high torque, super smooth and easy operation
- Ultra-low speed, more refined implanting and superior quality
- Real-time display and c onvenient for speed adjustment
- Continuously variable speed, long-stroke pedals are sensitive and c omfortable
- Limit rotation function to prevent compression of bones and ensur e stress-free healing
Swiss motor, quiet and light, not easy to fatigue
The ultra-quiet motor is imported from Switzerland;The noise is less than 40dB; E xtremely lightweight, comfortable to hold, and will not be tired after long-term operation; High CRI (color rendering index) LED light source, natural daylight, adjustable brightness (E80)German bearings, large torque ultra-smooth and easy to operate
German bearings, radial runout ≤ 0.02mm, e xtremely stable operation; The unique gear structure design, can withstand a maximum torque output of 80N·cm; De tachable structure design for easy cleaning and disinfection.Limit rotation function to prevent compression of bones and ensure stress-free healing
The unique limited-value gyration function prevents serious micro-damage of the bone int erface caused by excessive implant torque and affects bone tissue healing. Meanwhile, it prevents excessive compression of the bone when the implant is scr ewed into the bone and c auses bone resorption, and finally achieves stress-free healing of the implant.Ultra low rotation speed for implant to reduce bone trauma
100 rpm，5N·cm-70N·cm;The ultra-low speed of the mo tor is 100 rpm, and the pr ecise torque control of 5N·cm-70N·cm reduces bone trauma. It brings more advantages to prepare cavity for implant system in the maxilla in pretty low speed.Real time display, the parameters can be adjusted quickly and obviously
The interface is simple and intuitive, the tr eatment steps, speed, torque, cooling water adjustment, forward and reverse and other parameters can be displayed and adjusted in real time. The operation is simple and convenient; the appearance is simple and be autiful, and it is e asy to clean without dead spots.Tepless variable speed, long-stroke foot pedal is more sensitive and comfortable.
Metal pedal, stepless speed change, long-stroke design, comfortable and sensitive speed c ontrol. Innovative button design for water source to control water out and stop in no delay. It definitely brings more convenience to avoid the step-by-step foot control to increase and decrease the water flow. IPX6 professional surgical-grade waterproof surface treatment to ensure safety and reliability.
SKU: n/a -
Materials / Medicament, Restorative, Temporary Restorative
Bio-C Temp
Bioceramic paste for intracanal dressing
- Intracanal medication in endodontic treatment of teeth with pulp necrosis and retreatments.
- Intracanal medication in cases of perforations and external and internal resorptions, previously to the use of BIO-C REPAIR, MTA REPAIR HP and MTA ANGELUS.
- Incomplete rhizogenesis.
- Gradual release of Ca2+
- Biocompatible
- High alkalinity
- Easy to remove
- High radiopacity
- No periodic replacements needed
- Absence of symptomatology
- Improper environment for bacterial growth
- Clinical time optimization
- Great radiographic visualization
SKU: n/a -
Luting Cement & Liners, Materials / Medicament
Bio-C Sealer Ion+
Bioceramic root canal sealer ready to use
- Sealing the root canal of permanent teeth;
Internal resorption treatment.
- Ready to use: dispenses mixing;
- Non resinous: easy to clean;
- Excellent flow: allows the obturation of acessory canals;
- Cold and warm techniques: flexible to the chosen technique;
- Biocompatible: does not cause tissue damage;
- Low solubility: prevents micro gaps in the material after setting;
- Sets in the presence of moisture: adequate working time;
- Zirconium radiopacifier: does not stain the tooth structure.
SKU: n/a - Sealing the root canal of permanent teeth;
-
Materials / Medicament, Restorative, Temporary Restorative
Bio-C Repair
BIO-C® REPAIR is a ready-to-use bioceramic repair cement (putty).
The ready-to-use presentation in a screw-in syringe facilitates the removal of the product for application at the preparation site, simplifying this procedure with great time savings. In addition to its ease of use, it offers all the benefits of bioceramic formulation: induction of tissue regeneration through the release of Ca2+ ions resulting in the formation of mineralized tissue, bactericidal action due to its high pH, inhibition of bacterial infiltration by setting expansion and chemical adhesion to dentin. As a result, safety and high rates of success
in endodontic treatment are obtained.
- Treatment of root or furcation perforation via canal;
- Treatment of root or furcation perforation via surgery;
- Treatment of internal resorption via canal;
- Treatment of communicating internal or external resorption via surgery;
- Retrofilling in endodontic surgery;
- Direct and indirect pulp capping;
- Apexification;
- Apexogenesis and Pulpotomy;
- Pulp regenerationr.
- Ready-to-use/putty
- Bioactive
- High alkalinity (ph~12)
- Setting expansion and Chemical adhesion to dentin
- Radiopacifier Zirconium Oxide
- Hydrophilic
- Non-toxic
- Non-resin composition
- Average particulate size (~2 microns)
- Easy to use and insert into cavity
- Stimulates tissue regeneration
- Bactericidal action
- Prevents bacterial infiltration
- High radiopacity and does not stain
- Absorbs moisture from the medium, starting the setting process
- Does not contain heavy metals
- Allows use in humid media without loss of properties, especially in surgeries where the humidity control of the operative site is difficult
- Greater reactivity, accelerating the healing process.
SKU: n/a
-
Handpieces, Low Speed Contra Angle Handpiece
Low Speed Contra Angle 1 : 5
1:5 L Contra Angle with LED 10.000 – 200.000 rpm
Four holes spray
Highly enhance the cooling effectFiber optic
To provide high illumination in the patients’ mouth during treatmentPrecise gear production
Swiss made equipment to guarantee the accuracy of gears100% 1:5 increasing rate
Strong in cutting power and high efficiency5 pcs German bearings
Fantastic performance in torque, vibration, noise, durability and little temperature increasing rate
- Rotation ratio : 1:5
- Connector : Standard E-type connector
- Rotation speed : Up to 200.000 rpm
- Noise : ≤ 60 dB
- Light : Built-in LED
- Water spray : Single
- Chucking type : Push-button type
SKU: n/a -
Equipment / Dental Unit / X-Ray / Etc, Micromotor
E1
E1 Electric Micromotor with LED light 2.000 – 40.000 rpm
Storage Function
It can store speed choice for different dentistsFiber Optic
To provide high illumimation in the patients mouth during treatment6 pcs German Bearing
Fantastic performance in torque, vibration, noise, durability and little temperature increasing rateFour Hole Spray
Highly enhance the cooling effect4 Modes
1:1, 1:5, 16:1, 20:1Precise Gear Production
Swiss made equipment to guarantee the accuracy of gear100% 1:5 increasing rate
Strong in cutting power and high efficiency
SKU: n/a -
Handpieces, Implant Handpiece
Jinme 20 : 1
High torque implant handpiece with minimal vibration
- Appearance and material : chrome coating and stainless steel material
- Chucking type : push button
- Cooling device : external water spray
- Illumination source : fiber optic
- Coupling : E type
- Bur : ISO1797-1 ø2.35 Surgical bur (1 type)
- Gear ratio : 20:1
- Max speed : 2000 rpm/min
- Noise : 48dB
- Weight : 71.5 gr ± 0.5 gr
- Illumination : 10.000 Lux ± 10%
- Vibration of testing bur : 0.035 mm
- Maximum dynamic torque (under 100 rotation) : 80 N.cm
SKU: n/a -
Implant Equipment, Implants
E82
Committed to stress-free healing implant motor
- 8.In oral treatment, the concentration or excessive bone stress around the implant is one of the main f actors affecting the long-term use of the implant.
- JINME implant machine has unique s tress-free healing function, which avoids excessive compression of the bone when screwing the implant into the implant to cause stress to cause bone resorption around the implant, thereby increasing the implant success rate.
Six advanced implanting experience
- Swiss motor, quiet and light , not easy to fatigue
- German bearings, high torque, super smooth and easy operation
- Ultra-low speed, more refined implanting and superior quality
- Real-time display and c onvenient for speed adjustment
- Continuously variable speed, long-stroke pedals are sensitive and c omfortable
- Limit rotation function to prevent compression of bones and ensur e stress-free healing
Swiss motor, quiet and light, not easy to fatigue
The ultra-quiet motor is imported from Switzerland;The noise is less than 40dB; E xtremely lightweight, comfortable to hold, and will not be tired after long-term operation; High CRI (color rendering index) LED light source, natural daylight, adjustable brightness (E80)German bearings, large torque ultra-smooth and easy to operate
German bearings, radial runout ≤ 0.02mm, e xtremely stable operation; The unique gear structure design, can withstand a maximum torque output of 80N·cm; De tachable structure design for easy cleaning and disinfection.Limit rotation function to prevent compression of bones and ensure stress-free healing
The unique limited-value gyration function prevents serious micro-damage of the bone int erface caused by excessive implant torque and affects bone tissue healing. Meanwhile, it prevents excessive compression of the bone when the implant is scr ewed into the bone and c auses bone resorption, and finally achieves stress-free healing of the implant.Ultra low rotation speed for implant to reduce bone trauma
100 rpm，5N·cm-70N·cm;The ultra-low speed of the mo tor is 100 rpm, and the pr ecise torque control of 5N·cm-70N·cm reduces bone trauma. It brings more advantages to prepare cavity for implant system in the maxilla in pretty low speed.Real time display, the parameters can be adjusted quickly and obviously
The interface is simple and intuitive, the tr eatment steps, speed, torque, cooling water adjustment, forward and reverse and other parameters can be displayed and adjusted in real time. The operation is simple and convenient; the appearance is simple and be autiful, and it is e asy to clean without dead spots.Tepless variable speed, long-stroke foot pedal is more sensitive and comfortable.
Metal pedal, stepless speed change, long-stroke design, comfortable and sensitive speed c ontrol. Innovative button design for water source to control water out and stop in no delay. It definitely brings more convenience to avoid the step-by-step foot control to increase and decrease the water flow. IPX6 professional surgical-grade waterproof surface treatment to ensure safety and reliability.
SKU: n/a -
Implant Equipment, Implants
E80
Committed to stress-free healing implant motor
- 8.In oral treatment, the concentration or excessive bone stress around the implant is one of the main f actors affecting the long-term use of the implant.
- JINME implant machine has unique s tress-free healing function, which avoids excessive compression of the bone when screwing the implant into the implant to cause stress to cause bone resorption around the implant, thereby increasing the implant success rate.
Six advanced implanting experience
- Swiss motor, quiet and light , not easy to fatigue
- German bearings, high torque, super smooth and easy operation
- Ultra-low speed, more refined implanting and superior quality
- Real-time display and c onvenient for speed adjustment
- Continuously variable speed, long-stroke pedals are sensitive and c omfortable
- Limit rotation function to prevent compression of bones and ensur e stress-free healing
Swiss motor, quiet and light, not easy to fatigue
The ultra-quiet motor is imported from Switzerland;The noise is less than 40dB; E xtremely lightweight, comfortable to hold, and will not be tired after long-term operation; High CRI (color rendering index) LED light source, natural daylight, adjustable brightness (E80)German bearings, large torque ultra-smooth and easy to operate
German bearings, radial runout ≤ 0.02mm, e xtremely stable operation; The unique gear structure design, can withstand a maximum torque output of 80N·cm; De tachable structure design for easy cleaning and disinfection.Limit rotation function to prevent compression of bones and ensure stress-free healing
The unique limited-value gyration function prevents serious micro-damage of the bone int erface caused by excessive implant torque and affects bone tissue healing. Meanwhile, it prevents excessive compression of the bone when the implant is scr ewed into the bone and c auses bone resorption, and finally achieves stress-free healing of the implant.Ultra low rotation speed for implant to reduce bone trauma
100 rpm，5N·cm-70N·cm;The ultra-low speed of the mo tor is 100 rpm, and the pr ecise torque control of 5N·cm-70N·cm reduces bone trauma. It brings more advantages to prepare cavity for implant system in the maxilla in pretty low speed.Real time display, the parameters can be adjusted quickly and obviously
The interface is simple and intuitive, the tr eatment steps, speed, torque, cooling water adjustment, forward and reverse and other parameters can be displayed and adjusted in real time. The operation is simple and convenient; the appearance is simple and be autiful, and it is e asy to clean without dead spots.Tepless variable speed, long-stroke foot pedal is more sensitive and comfortable.
Metal pedal, stepless speed change, long-stroke design, comfortable and sensitive speed c ontrol. Innovative button design for water source to control water out and stop in no delay. It definitely brings more convenience to avoid the step-by-step foot control to increase and decrease the water flow. IPX6 professional surgical-grade waterproof surface treatment to ensure safety and reliability.
SKU: n/a -
Materials / Medicament, Restorative, Temporary Restorative
Bio-C Temp
Bioceramic paste for intracanal dressing
- Intracanal medication in endodontic treatment of teeth with pulp necrosis and retreatments.
- Intracanal medication in cases of perforations and external and internal resorptions, previously to the use of BIO-C REPAIR, MTA REPAIR HP and MTA ANGELUS.
- Incomplete rhizogenesis.
- Gradual release of Ca2+
- Biocompatible
- High alkalinity
- Easy to remove
- High radiopacity
- No periodic replacements needed
- Absence of symptomatology
- Improper environment for bacterial growth
- Clinical time optimization
- Great radiographic visualization
SKU: n/a -
Luting Cement & Liners, Materials / Medicament
Bio-C Sealer Ion+
Bioceramic root canal sealer ready to use
- Sealing the root canal of permanent teeth;
Internal resorption treatment.
- Ready to use: dispenses mixing;
- Non resinous: easy to clean;
- Excellent flow: allows the obturation of acessory canals;
- Cold and warm techniques: flexible to the chosen technique;
- Biocompatible: does not cause tissue damage;
- Low solubility: prevents micro gaps in the material after setting;
- Sets in the presence of moisture: adequate working time;
- Zirconium radiopacifier: does not stain the tooth structure.
SKU: n/a - Sealing the root canal of permanent teeth;
-
Materials / Medicament, Restorative, Temporary Restorative
Bio-C Repair
BIO-C® REPAIR is a ready-to-use bioceramic repair cement (putty).
The ready-to-use presentation in a screw-in syringe facilitates the removal of the product for application at the preparation site, simplifying this procedure with great time savings. In addition to its ease of use, it offers all the benefits of bioceramic formulation: induction of tissue regeneration through the release of Ca2+ ions resulting in the formation of mineralized tissue, bactericidal action due to its high pH, inhibition of bacterial infiltration by setting expansion and chemical adhesion to dentin. As a result, safety and high rates of success
in endodontic treatment are obtained.
- Treatment of root or furcation perforation via canal;
- Treatment of root or furcation perforation via surgery;
- Treatment of internal resorption via canal;
- Treatment of communicating internal or external resorption via surgery;
- Retrofilling in endodontic surgery;
- Direct and indirect pulp capping;
- Apexification;
- Apexogenesis and Pulpotomy;
- Pulp regenerationr.
- Ready-to-use/putty
- Bioactive
- High alkalinity (ph~12)
- Setting expansion and Chemical adhesion to dentin
- Radiopacifier Zirconium Oxide
- Hydrophilic
- Non-toxic
- Non-resin composition
- Average particulate size (~2 microns)
- Easy to use and insert into cavity
- Stimulates tissue regeneration
- Bactericidal action
- Prevents bacterial infiltration
- High radiopacity and does not stain
- Absorbs moisture from the medium, starting the setting process
- Does not contain heavy metals
- Allows use in humid media without loss of properties, especially in surgeries where the humidity control of the operative site is difficult
- Greater reactivity, accelerating the healing process.
SKU: n/a
Products Grid
Best Sellers
Recently Added
Low Speed Contra Angle 1 : 5
1:5 L Contra Angle with LED 10.000 – 200.000 rpm
Four holes spray
Highly enhance the cooling effect
Fiber optic
To provide high illumination in the patients’ mouth during treatment
Precise gear production
Swiss made equipment to guarantee the accuracy of gears
100% 1:5 increasing rate
Strong in cutting power and high efficiency
5 pcs German bearings
Fantastic performance in torque, vibration, noise, durability and little temperature increasing rate
E1
E1 Electric Micromotor with LED light 2.000 – 40.000 rpm
Storage Function
It can store speed choice for different dentists
Fiber Optic
To provide high illumimation in the patients mouth during treatment
6 pcs German Bearing
Fantastic performance in torque, vibration, noise, durability and little temperature increasing rate
Four Hole Spray
Highly enhance the cooling effect
4 Modes
1:1, 1:5, 16:1, 20:1
Precise Gear Production
Swiss made equipment to guarantee the accuracy of gear
100% 1:5 increasing rate
Strong in cutting power and high efficiency
Jinme 20 : 1
High torque implant handpiece with minimal vibration
E82
Committed to stress-free healing implant motor
Six advanced implanting experience
Swiss motor, quiet and light, not easy to fatigue
The ultra-quiet motor is imported from Switzerland;The noise is less than 40dB; E xtremely lightweight, comfortable to hold, and will not be tired after long-term operation; High CRI (color rendering index) LED light source, natural daylight, adjustable brightness (E80)
German bearings, large torque ultra-smooth and easy to operate
German bearings, radial runout ≤ 0.02mm, e xtremely stable operation; The unique gear structure design, can withstand a maximum torque output of 80N·cm; De tachable structure design for easy cleaning and disinfection.
Limit rotation function to prevent compression of bones and ensure stress-free healing
The unique limited-value gyration function prevents serious micro-damage of the bone int erface caused by excessive implant torque and affects bone tissue healing. Meanwhile, it prevents excessive compression of the bone when the implant is scr ewed into the bone and c auses bone resorption, and finally achieves stress-free healing of the implant.
Ultra low rotation speed for implant to reduce bone trauma
100 rpm，5N·cm-70N·cm;The ultra-low speed of the mo tor is 100 rpm, and the pr ecise torque control of 5N·cm-70N·cm reduces bone trauma. It brings more advantages to prepare cavity for implant system in the maxilla in pretty low speed.
Real time display, the parameters can be adjusted quickly and obviously
The interface is simple and intuitive, the tr eatment steps, speed, torque, cooling water adjustment, forward and reverse and other parameters can be displayed and adjusted in real time. The operation is simple and convenient; the appearance is simple and be autiful, and it is e asy to clean without dead spots.
Tepless variable speed, long-stroke foot pedal is more sensitive and comfortable.
Metal pedal, stepless speed change, long-stroke design, comfortable and sensitive speed c ontrol. Innovative button design for water source to control water out and stop in no delay. It definitely brings more convenience to avoid the step-by-step foot control to increase and decrease the water flow. IPX6 professional surgical-grade waterproof surface treatment to ensure safety and reliability.
E80
Committed to stress-free healing implant motor
Six advanced implanting experience
Swiss motor, quiet and light, not easy to fatigue
The ultra-quiet motor is imported from Switzerland;The noise is less than 40dB; E xtremely lightweight, comfortable to hold, and will not be tired after long-term operation; High CRI (color rendering index) LED light source, natural daylight, adjustable brightness (E80)
German bearings, large torque ultra-smooth and easy to operate
German bearings, radial runout ≤ 0.02mm, e xtremely stable operation; The unique gear structure design, can withstand a maximum torque output of 80N·cm; De tachable structure design for easy cleaning and disinfection.
Limit rotation function to prevent compression of bones and ensure stress-free healing
The unique limited-value gyration function prevents serious micro-damage of the bone int erface caused by excessive implant torque and affects bone tissue healing. Meanwhile, it prevents excessive compression of the bone when the implant is scr ewed into the bone and c auses bone resorption, and finally achieves stress-free healing of the implant.
Ultra low rotation speed for implant to reduce bone trauma
100 rpm，5N·cm-70N·cm;The ultra-low speed of the mo tor is 100 rpm, and the pr ecise torque control of 5N·cm-70N·cm reduces bone trauma. It brings more advantages to prepare cavity for implant system in the maxilla in pretty low speed.
Real time display, the parameters can be adjusted quickly and obviously
The interface is simple and intuitive, the tr eatment steps, speed, torque, cooling water adjustment, forward and reverse and other parameters can be displayed and adjusted in real time. The operation is simple and convenient; the appearance is simple and be autiful, and it is e asy to clean without dead spots.
Tepless variable speed, long-stroke foot pedal is more sensitive and comfortable.
Metal pedal, stepless speed change, long-stroke design, comfortable and sensitive speed c ontrol. Innovative button design for water source to control water out and stop in no delay. It definitely brings more convenience to avoid the step-by-step foot control to increase and decrease the water flow. IPX6 professional surgical-grade waterproof surface treatment to ensure safety and reliability.
Bio-C Temp
Bioceramic paste for intracanal dressing
Bio-C Sealer Ion+
Bioceramic root canal sealer ready to use
Internal resorption treatment.
Bio-C Repair
BIO-C® REPAIR is a ready-to-use bioceramic repair cement (putty).
The ready-to-use presentation in a screw-in syringe facilitates the removal of the product for application at the preparation site, simplifying this procedure with great time savings. In addition to its ease of use, it offers all the benefits of bioceramic formulation: induction of tissue regeneration through the release of Ca2+ ions resulting in the formation of mineralized tissue, bactericidal action due to its high pH, inhibition of bacterial infiltration by setting expansion and chemical adhesion to dentin. As a result, safety and high rates of success
in endodontic treatment are obtained.
DS01
Dental electric suction machines are used in oral treatment equipment. In the process of oral treatment, oral secretions and dirty blood are produced. The machine can provide a negative pressure suction power source for the dental treatment machine to suck away foreign objects with cells and contaminated liquid and debris. It can be used in hospitals or During treatment, dental office equipment is used as a suction power source when sucking spray, saliva, blood and small particles.
DS00 series straight shaft suction machine adopts durable design concept, superior product quality, ultra-small size and easy installation and maintenance.
| Model | DS01 |
|---|---|
| Voltage (V) | 110-240 |
| Frequency (Hz) | 50/60 |
| Power (kW) | 370 |
| Vacuum (kPa) | -12 |
| Max Air Flow | 450 L/min |
| Net Weight (Kg) | 22 |
| Dimension (mm) | 320*320*520 |
| Simultaneity Factor | For 1 chair |
DU32L
Portable Dental Chair
Dynamic Portable Dental Unit
Physician Chair
DU812
DYNAMIC’s mobile type treatment table, built-in 3-way syringe,saliva ejector,L.S.H tube,H.S.H tube,Tray,scaler (optional),curing light (optional), and external air source, movable pulley.
It can be flexibly used in various dental clinics.
DS1000 Standard
During treatment, doctors may use ultrasonic scalers, 3-way syringes, high and low speed handpieces and many other types of equipment spray to generate a large amount of water mist combined with bacteria, saliva, and blood from the patients mouth wich will produce aerosols. The external oral suction removes these aerosols to prevent cross-infection betwen doctors and patients.
Suction hoods are not autoclavable and should be cleaned by 75% alcohol or non-corrosive disinfectant by wiping or atomization.
With strong suction vaccum pressure and large flow rate, which greatly reduces the risk of cross infection between doctors and patients.
The aerosol and air entered the suction unit is filtered through primary filter and HEPA strainer, sterilized by ultraviolet rays, and then discharge through a large amount of plasma sterilization and purification.
DS1000
During treatment, doctors may use ultrasonic scalers, 3-way syringes, high and low speed handpieces and many other types of equipment spray to generate a large amount of water mist combined with bacteria, saliva, and blood from the patients mouth wich will produce aerosols. The external oral suction removes these aerosols to prevent cross-infection betwen doctors and patients.
Suction hoods are not autoclavable and should be cleaned by 75% alcohol or non-corrosive disinfectant by wiping or atomization.
With strong suction vaccum pressure and large flow rate, which greatly reduces the risk of cross infection between doctors and patients.
The aerosol and air entered the suction unit is filtered through primary filter and HEPA strainer, sterilized by ultraviolet rays, and then discharge through a large amount of plasma sterilization and purification.
Maintain :
Change UV lamp and HEPA filter once a year.
Clean the free arm by non-organic solvent disinfection
DS3000
Feature :
Ai Endomotor
High performance brushless motor built-in Apex Locator
Accurate rotating angle reduces risk of instruments fracture
D600 LED
Intelligent Power Output – Experience Painless Treatment
High Quality Handpiece
The shell of the handpiece is made of special imported plastic from America, which can be autoclaved under high temperature and pressure without cracking or deformation.
Original handpiece sealing technique,reliable and durable.
More comfortable to use due to its ergonomic design.
Multipurpose
Integrate supragingival scaling, subgingival scaling, reconstruction of minimal damnification, implant maintenance and root canal therapy into a whole.
Design & Experience
Intelligent degenerative feedback.
More effective scaling.
In accordance with different tooth surface, intelligent degenerative feedback will automatically output accurate power to the tip.
Stable and sustained scaling in the calcification removing process brings you professional operating experience.
Sine wave drive.
Avoiding stimulation caused by instantaneous current output; ensuring comfortable treatment.
Perfect combination of comfort and efficiency.
Clear touch control panel.
Clear power regulation and mode selection.
Ultrasonic Endo Activation Device
| Two Working Modes | Regular and high power options, meet different situation requirement |
| Front Light | LED light gives a better view inside oral cavity |
| Wireless Charging | Equipped with wireless charger, faster and more convenient |
| Battery | 2600 MAH longer standby time |
| Small Amplitude, Strong Power | Mute Ultrasonic Technology Small amplitude but strong power More stable and less noisy during working |
| Tips meet more root canal situation requirement | 3TIPS/EL98; 3TIPS/EL96 |
| Cordless Control (Optional) | Wireless foot control, reducing operation difficulty of the dentist |
F One Essential Kit
This kit is designed for all the steps of the endodontic treatment : flaring-preflaring, working length, glide path, shaping and finishing, for regular and complex cases.
Included in the box: Size 10 K file, 13.03, 20.04, 25.06 & 35.06 rotary files.
All rotary files have Fanta’s patented flat side design and AF-R Wire technology. This results in these files having extremely high cutting efficiency, whilst also being incredibly flexible.
Available in 21mm and 25mm kits.
Obturation System Down Pack
| Temperature Range | 110°C, 140°C, 170°C, 200°C, 230°C |
| Front Light | LED light gives a better view inside oral cavity |
| Bluetooth | Wireless foot control |
| Battery | 2600 MAH longer standby time |
| Internally Heated Tip | The working end (3 – 4 mm) of the tip is heated |
| Rotation Tip | The needle can be rotated to adapt to multi-angle operation |